@@ElijahAngwin I could see if the car was built with performance as a priority but it's not. It's really just to look and sound good and be fun to drive. Which at the current moment checks all the box's for me

@@dustinperrydore7713 No Cats..... Or Dogs lol 🤣

@@mustangman429 Thanks man 👍

@@fords4life914 I love them but unfortunately with these last ones I purchased I noticed they say made in China now. Idk if I'll buy them again which is sucks

@@samcoffey4711 mine have been fine. I've had 2 step run through them and popped in the mufflers. They do fine lol

@@fords4life914 the quality still seems good, I just didn't like the fact that Flowmaster used to advertise "Made in America" and then secretly moved everything to China. I'd rather pay a lil more for them still be domestic

@@samcoffey4711 yea that kinda sucks lol

@@TheRustWhisperer Thanks, not a thing done. It's a 03 so its not rev limited to 3k rpm like the 05+ Vic's are after swapping. I put the auto range sensor in Neutral and ziptied it up. Only issues I have is constant cooling fans running at max and on decel if you don't blip the throttle before pushing the clutch it'll stall. This is due to the pcm cutting the ignition to help engine brake when slowing down. The fans running all the time is the pcm think the auto is overheating

@@MrSlimeMan01 It does, check out my other videos on the car. I can't fully price it out because I bought a broke trans and built my pedals myself. Usually the T-45 trans sell for 500-700$ and then all the other stuff you'd be in about 2k or a lil more. I'm about 600$ into it since I bought a broken trans and built my stuff

Ain't that the truth 😭😂 it's fun tho

@@self-madejacobo8281 Play-Doh is handier than most people think 😉

@@ssgsschiraq8858 Both Lol, It's from Tremec for a mustang. 96-01 gt specifically

@@ANTHONYTOMPKINS-r1i Thanks man 👍

@@kirklandracing Thanks man, it's got a CV swap in the front and I redrilled the rear axles to 5x4.5" also used explorer rear disc brake setup

Thanks for the advice man, I respect smart advice. I do wear gloves for that very reason!

Orion powersports ships them for free. And they sign everything you need to get the title. Mine is on its way in the mail. KY is required as well. They charge a 30$ notary fee at Orion but after that it's ready to take to the clerk and get inspected and send off for the title.

😂😂😂 it ain't illegal unless you get caught

Those values do change when a not stock oil pump is installed and if someone's using a aftermarket oil pan/pickup. Yeh stock there's no need. What your point dude? This was just to show people "how to"

At a fraction of the cost of a new name brand bike I won't complain. It does bounce around a bit but I keep it pretty full anyways so thats not a problem. It honestly sounds worse on camera. I don't hear any of the noise like that in person. I didn't have the GoPro zip ties to the handle bars so I'm sure it was picking up a lot of different vibrations aswell. So far I'm very satisfied with it for the price. It ain't nothing to brag about but said and done it'd get you there and back and cheaply

Hey buddy! Hope you and your family are doing good!

Literally buying the same style jeep and doing the same thing in a week

M5R2 5 speed from the 87-96 f150s. People say there weak but I personally think there pretty decent. Iv had this one in for about 6 years and haven't had any trouble with it

Thanks man!

@samcoffey4711 What's under the hood she was getting down purity good lol.

Man that 351 sounds good brother, you sure got it crankin

Thanks bubba @adamhoskins7312

@chrismuncey3861 351w, .40 over flat tops, close to 10:1 Compression, speedmaster (ProComp) 210cc heads and top end kit, lunati 280/290 barebones camshaft. The cam will hopefully get changed out pretty soon. It's 472"in X 496"ex it was for the stock headed engine. Now with better heads and springs I can go closer to .600" lift to get the most out of these heads

Gain doesn't make you a good player either 😂😂😂

😂😂😂 and how do you no they was good exactly?

There bald and need replaced along time ago. Pretty much the same thing your wife says 😂😂

@samcoffey4711 Good point. Probably never keeps a pair good more than a few days. 😆

Again, I don't see that affects you in the slightest bit 😂 but yes if you must know. These tires are bald and dry rotted. There still on the truck right now 3 months after this was filmed. If I had brand new tire best believe I would not be burning them off like this. You'd have to have big full pockets to ruin brand new tires which I don't not have

its changed alot since this upload, check out my recent uploads!

I actually just traded it off but it hadn't given me any problems. Just keep it greesed, definitely very good quality for the money. I had daily driven it for the last 3 years 60miles a day

@@samcoffey4711 awesome! Thank you for the reply! I've been looking for a track bar for a while now. Nothing else seems to bolt in with enough angle to clear the factory mount without modifications.

@@samcoffey4711 I just dented my oil pan with it first time out

I actually changed to thrush turbo now but at the time of this it was 2.5" in and out flo-pro eBay mufflers. They was more or less a knock off super 10 single chamber

They was 2 1/2" in and out flow- pro eBay mufflers. I changed them about 3 months ago to a thrush turbo single and I am way happier with it. The flo-pro droned really bad

Thanks!, I drive it to work from time to time

17656MGF at AutoZone

check out my newer uploads, it got some upgrades now!

I bought it as a kit. So it came with the cam and lifters other than that it didn't take anything special other than break-in oil and a 30min break-in.

Everything else is stock. Stock valve springs and retainers

No shit i appreciate it im putting a 408 stroker kit in mine was wondering if.i would be able to put that in it or a bigger one

What is the cam called lunati barebones or you just put bare bones like as stock lol

The cam its self is called a "lunati barebones" or atleast it was when bought it. It's 280/290 duration. If you have stock heads idk if you can run much bigger of a cam unless valve springs and retainers are upgraded