Mike Moncrief

Пікірлер

@CampingGuy Күн бұрын

That machine is a really big help for cleaning

@genemetz1945 Күн бұрын

If you think 40 volts is good try the - 80-volt - 5-ah battery - 10" Bar - 6 ft / 8ft foot Kobalt Pole Saw. No cable. I’m using an Oregon Bar and Chain. I have been using it for more than 3 years now and love it. It works great on my southeast Louisiana farm clearing property that a hurricane went through and trashed all the trees in the woods of our 20-acre farm. I carry it all over our woods and the battery lasts a long time. Today I'll be cutting a 6-inch limb off of a tree out front. I also have (2) 80-volt 5-ah batteries 18" chain saws they are awesome.

@MikeM100 14 сағат бұрын

The 80v tools work good too. I've got a couple, but haven't used them enough to do videos. I want to give them a good workout before doing a video. I hope you guys have recovered from the latest bad weather. Down where you live, you need a chainsaw just to fight off the mosquitos. Thanks for watching.

@genemetz1945 13 сағат бұрын

@@MikeM100 - Everything is good. Strange that the mosquitos don't usualy bother me, but the terrorize the rest of my family. 🙂

@mr.m2695 2 күн бұрын

Why so small? Your pet should have enough room to fully stand and move around without issues.

@MikeM100 2 күн бұрын

He can stand in it and move around.

@mr.m2695 Күн бұрын

@@MikeM100 doesn’t look like it. He’s barely standing.

@angiemoncrief2869 4 күн бұрын

That’s a nice drill

@HollyMoncrief 4 күн бұрын

I had no idea what goes into it! I appreciate the in depth explanation!

@alyssamoncrief9385 4 күн бұрын

This is so helpful!

@StarknightMT_official 5 күн бұрын

Hello, Are you interested in testing the Rear Windshield Fit for your 2022 CFMOTO UFORCE 1000?

@hmporritt 6 күн бұрын

Shouldnt you turn on the engine after adding the 3.1 quarts of oil to cycle and then add the remainder?

@MikeM100 5 күн бұрын

I've never read that anywhere.

@rob82drum 8 күн бұрын

I have a Baseus 12000ah jump starter. I stopped using it for 6 months, now it won't charge. Can you tell me if I can fix it?

@MikeM100 6 күн бұрын

It sounds like you have a bad battery. Some lead acid batteries will build up less sulfate crystals if it isn't charged periodically. Once the crystals cover the poles Inside the battery it will permanently damaged.

@genemetz1945 9 күн бұрын

I love my Kobalt Pole Chainsaw - 80-volt - 5-AH battery - 10" Bar - 6 ft / 8ft foot Pole Chainsaw. No electric cord. I've been using Oregon Bars and Chains. I have been using it for more than 3 years now. It works great on my southeast Louisiana farm clearing property that a hurricane went through and trashed all the trees throughout the woods of our 18-acre farm. I carry it all over in our woods and the battery lasts a long time. Today I'll be cutting a 6-inch limb off of a tree out front. I am also using (2) Kobalt 80 volt 18" Bar Chainsaws and using (2) 5 AH Batteries. Cuts huge logs great. The chainsaw first one wound up in a puddle and stopped working but after a couple of weeks and it had dried out, it started working again. For oil, I like to use Ryobi Bar and chain oil. We have cut 20"+_ logs and works like a charm. And NO more pulling and pulling to start a gas-powered chainsaw.

@sambo5103 14 күн бұрын

Bought my first kobalt mower on clearance for $79.came with battery & charger. I then went on Craigslist & got a kobalt mower plus 3 batterys a d 2 chargers all from 2012 For Free!!. They all still work but the 3 oldest batterys only charger enough for 10 minute run time. Just bought a new blower and hedgetrimmer yesterday. Both came with batterys and a charger each. It's cheaper to upgrade the tools and get a new battery & charger than to just buy a new battery. I've been using kobalt now 7 years & all my equipment still works, I just ha e 2 sets of everything for my two property's & that's nice. My weedeaters I use to cut 3' swath along outer 600' fence leading down our driveway to the house with no problems a d I use these on our 10rental house property's to

@jn7420 14 күн бұрын

Honest Man. Must be a Republican.

@mikestowe6136 16 күн бұрын

this a can am defender striped down looks just like one looks nothing like a honda

@Sns4life89 17 күн бұрын

why not buy a shipping crate and just make a door thats what i did

@10469 17 күн бұрын

Got my 2024 1000. I’m super excited to upgrade it. Thanks for the tips.

@MikeM100 17 күн бұрын

Thanks for watching. The P 1000 is a great machine. BTW, you can get camo seat covers at camocover dot net. Thanks for watching

@moneymaker8668 20 күн бұрын

Does it take off bleach stains on concrete basement floors

@MikeM100 20 күн бұрын

Sorry, I don't have any experience with trying that. But now I'm wondering why someone would need to bleach a basement.....

@robertkerby2581 22 күн бұрын

Mike, I really liked your video on the Kobalt 40volt Trimmer. I am a Kobalt tool owner and user and I have thoroughly enjoyed using these 24volt battery powered tools. I have owned the following Kobalt 24 volt tools for 9-1/2 years; drill driver; impact driver; 7-1/4" circular saw; Reciprocating Saw; Chain Saw; and Pole Saw. In addition, I have owned a 40volt Lawnmower for 9-1/2 years without a single issue. I really enjoy using the Kobalt tool brand tools and highly recommend them to all of my friends and family. Finally, I like and appreciate how Lowe's Home Center stands behind it's 5-year warranty for their Kobalt owned and branded tools! Well done on your review!

@MikeM100 21 күн бұрын

Thank you. I appreciate the feedback. Kobalt has come a long way. The better known brands don't have nearly the longevity and quality they used to have, which is why I tried Kobalt. So far so good.

@danadouglass2822 24 күн бұрын

So you switched from Honda to cfmoto, after a couple years how do you like the cf? How’s it holding up vs Honda

@MikeM100 24 күн бұрын

I sold the cfmoto after 3 months. It stayed in the shop. Inferior machine made from poor quality materials.

@danadouglass2822 24 күн бұрын

Glad I went with Honda, I was seriously considering buying a cf then my friend suggested the pioneer

@billjensen6216 24 күн бұрын

I have a 2020 Honda pioneer 700-4 and I made a battery box big enough to install a deep cycle battery under the driver's side seat. the top cover comes off in 2 parts and the front and side cover come off to make it easy to build a box for the battery. the transmission has to have a set amount of power to run correctly. if it doesn't have proper power to it, it will take the transmission out. the only thing that should run off the original battery is the starter and engine and transmission and the lights and power steering if equipped. the winch and other light and other extras should be attached to your second battery. including the winch. Just an FYI.

@MikeM100 24 күн бұрын

Thanks. Good advise. I added a second battery, with isolator, after doing the video and moved the fan and winch to the second battery, which is under the driver seat also.

@billjensen6216 24 күн бұрын

@@MikeM100 Thank you for the reply. I love the idea you have for the blower. I'm thinking of setting one up in mine to blow heat into the cab for winters in Wisconsin.

@MikeM100 24 күн бұрын

@@billjensen6216 pulling engine heat into the cabin works good. Just don't enclose the cabin too tightly because you will pull some exhaust gases in. A friend made that mistake and got really sick.

@billjensen6216 24 күн бұрын

@@MikeM100 good call

@SteveAddis 24 күн бұрын

Hi Mike. Sounds like a good price for the saw. I would love to have one for things like camping and in the vehicle when storms take place. Maybe you might do a mod fix video for the saw, especially the loosening issue. Hung up big trees, I usually only cut them slightly less than waist high, (dropping piece by piece) so there's no chance it will kick back and drop into me, and of course run fast like you did when needed. Some I used a pole saw for more safety. Surprising how just a small tree top falling on your arm can change the day. Take care.

@MikeM100 24 күн бұрын

I'm pretty happy with the saw, overall, but I wish the extra batteries were cheaper. I put some locktite on the bar bolt and that stopped it from vibrating loose. You're right, even a small limb hitting the head or hitting the arm that is holding the saw is a big danger. I keep a hard hat in the truck, but forgot to take it on the day I did the video. Now, after reading your comment, I wish I had mentioned that. I should have also worn the chaps. My next review is on a pole saw. I got tired of climbing a tree with the chain saw. 12 foot pole saw is a lot safer. Thanks for watching.

@patrickcharles7190 25 күн бұрын

So, the battery running down is the only issue. Not bad...considering that is what batteries do. Sounds like a good saw. Thanks for the review.

@MikeM100 25 күн бұрын

The battery is actually pretty good. I have now gone through 10 recharge cycles and average around 120 cuts for non-oak. The extra batteries are expensive. Overall, it's a decent saw. Thanks for watching.

@patrickcharles7190 25 күн бұрын

@@MikeM100 Your welcome. I just went and bought the saw.

@StarknightMT_official 29 күн бұрын

Hello, Are you interested in testing our products? We would like to invite you to test the 1680D Seat Cover Fit for your 2022 CFMOTO UFORCE 1000

@MikeM100 27 күн бұрын

Interested

@StarknightMT_official 27 күн бұрын

@@MikeM100 Hi, thank you. We will e mail you

@danadouglass9028 Ай бұрын

can you show how you ran your wires from the battery to the light

@MikeM100 24 күн бұрын

Sorry, I can't. I sold that Pioneer and upgraded to a 1000.

@danadouglass2822 24 күн бұрын

@@MikeM100 how much better is the 1000

@MikeM100 24 күн бұрын

It's a smoother ride, more power, wider base. Both great machines.

@funnyboneztwentythree7109 Ай бұрын

I’m gonna do this exact replica next weekend. Sweet and simple. Thanks for the video!

@MikeM100 Ай бұрын

Good luck. I hope it works out for you. It's a simple and effective design.Thanks for watching.

@samanthablack8176 Ай бұрын

Thank you for your easy-for-even-me-to-follow no waste tutorial! We made 2 today :)

@MikeM100 Ай бұрын

Awesome. I'm glad it could help you. Thanks for watching

@rayaguilar9085 Ай бұрын

Mine was new. Used it once last year. Pulled all the fuel out to store it. Now it still runs good but no water will go through the system. Even with it off, no water will come through. Its like its clogged.

@MikeM100 Ай бұрын

I would use an air-hose to try to blow air through it. I've never seen one do that. Maybe some bugs built a nest in it. Maybe try to force water from the outlet to the inlet.

@rayaguilar9085 Ай бұрын

@@MikeM100 I think what happened is the concrete cleaner I sprayed through it last has built up some residue that clogged it. In the mean time, my float must be stuck because when I checked the oil a gallon of gas poured out.

@tatankawhiteplume6038 Ай бұрын

I like you screwdriver key 20:19 😅😅😅

@MikeM100 Ай бұрын

It works. :)

@gitingrewal2204 Ай бұрын

Thank you

@MikeM100 Ай бұрын

You're welcome

@cutepets3548 Ай бұрын

Would like to know the measurements on the ply

@MikeM100 Ай бұрын

The dimensions are in the comments.

@reuvenrosenbloom6666 Ай бұрын

Hi mike i just bought a top vision ET06 jump battery. The box lists the number of starts at 50 times. I tried to contact the company to ask the total amount of possible jump starts the unit is rated at before i start to use it. Do you havw any comments. Thanks for your wonderful vidios i really appreciate them. If i can give any help with pesticides contact me. BLESSINGS TO YOUR FAMILY

@MikeM100 Ай бұрын

You definitely will not get 50 jumps from it. Like all the Chinese products, those specs are about 500% above the realistic usage. You might get 5. I use mine with farm equipment and usually recharge it after 2 or 3 uses. Thanks for watching and taking the time to comment.

@user-vb6pz7cz3q Ай бұрын

We’re did you get those black plastic for the dirtbike

@MikeM100 Ай бұрын

My son painted them.

@lloydmarche7263 Ай бұрын

Nice idea and great install. I ordered a heat shield kit for mine for under the seat . Will try that first and if needed I will install something similar as yours.

@MikeM100 Ай бұрын

The fan works pretty good. Several people have asked if it works better to pull hot air out than to push it in. I did it both ways and pushing cool air in worked best.

@ecarroll27019 Ай бұрын

Did you consider doing an exhaust fan instead of an intake fan? I'm curious on which may be for effective.

@MikeM100 Ай бұрын

I did it both ways. Pushing cool air in worked much better than pulling hot air out.

@MyRcGoSlow Ай бұрын

What if my oil smells like gas ?

@MikeM100 Ай бұрын

If you oil smells like gas, then there is a leak somewhere. Return it to the store.

@MyRcGoSlow Ай бұрын

@@MikeM100 I got it for free I started it her up removed oil and all the gas went through it then I refilled with oil no gas started it up thru air filter with carb cleaner it started right up waiting on new carb hopefully that’s the problem

@BlkTechMobileServicesL.L.C. 2 ай бұрын

🔥

@jerryjones4295 2 ай бұрын

Save yourself a lot of headaches and money and buy anything but cf moto

@MikeM100 2 ай бұрын

For real

@bsh21wash1 2 ай бұрын

Best place to tie down is using the tires. Rhino USA makes an awesome system with sets of Etrack that gets bolted down on both side of all 4 tires. All while letting the suspension due it's job whole traveling down the road.

@MikeM100 2 ай бұрын

Yeah, The etrac is what I use now. Much better than any other tiedown. Thanks for watching

@thecombatdonkey6087 2 ай бұрын

Ur telling me that you turned on an engine and it got so hot you could touch it………………………..😂

@benardwashington6724 2 ай бұрын

GREAT REVIEW A RAW AND UNCUT REVIEW 👍 GREAT ADVICE I WANT TO ADD ON THE TOP VISION BATTERY PACK

@MikeM100 2 ай бұрын

Thank you.

@user-iq9vb5cr3b 2 ай бұрын

how much was this build?

@MikeM100 2 ай бұрын

Around $40. Including wood and screws. Already had the tools.

@user-iq9vb5cr3b 2 ай бұрын

thank you ,, so much out of all the videos i’ve seen yours made sense

@MikeM100 2 ай бұрын

Cool. Thanks for watching.

@valeriessmokehouse2543 3 ай бұрын

you know you also could have picked up the leg finish drilling it and then put it back in the same

@MrScottmccarthy 3 ай бұрын

Awesome video. Thanks for sharing. I agree with alot of your review opinions on the Creative XP binoculars. The 50/60 hertz has to do with the British using 50 hertz and the USA uses 60 hertz. Its kind of complicated but if you Google whats the difference in 50/60 hertz they have some great videos on them.

@MikeM100 3 ай бұрын

Thank you. I finally figured out the 50/60 difference. Thank for watching and taking the time to comment. Aside from being too heavy, this unit works great.

@FJBsaidcornpop 3 ай бұрын

Looks like you need a pump saver saver to attach to the hose connection. 😅

@YTExploreMore 3 ай бұрын

Great video! I like how you showed the 2-3 year old trees too. How far apart do you recommend planting them? I’m planting for privacy, not for lumber. Also, can I plant them in Feb-March?

@MikeM100 3 ай бұрын

If you are planting for privacy I would plant them no closer than 4 or 5 feet apart, Any closer and time the roots will grow into each other and the trees will end up stunted and grow crooked. Loblolly is a great privacy tree. I also use them as a natural border between our property and the neighbor. They grow fast and bushy. The best time to plant them is January or February in the south when it's still cold out. In the north, then plant them when the ground thaws. The roots will still grow in the very early spring and branch out to give the tree a good head start. They need to be planted BEFORE the weather turns warm.

@YTExploreMore 3 ай бұрын

Thank you very much!@@MikeM100

@saviodesilva7933 3 ай бұрын

OT but I feel you sound a bit like Bill Clinton

@MikeM100 3 ай бұрын

I get that a lot. :)

@henkeH2 4 ай бұрын

Great build! However, I´m a little concerned about stability. Do you feel there is a need for a cross brace on the legs to prevent racking/flexing?

@MikeM100 3 ай бұрын

I haven't had a problem with it leaning or folding, and I roll my table all around the garage. I added a shelf below the table, which is probably helping it with strength. You could add an angled brace from the bottom surface of the table to the leg to stiffen it if necessary. Thanks for watching.