@Bodacious I have AREX Delta Gen 2 M, which I purchased new. And even though I am a US Marine Veteran and former Civilian cop, I don’t do much to any weapons without authorization usually, but as a civilian I resorted to your well informed video about which parts of the pistol that could use polishing. So I thank you for your learning curve and this video.
@Stussy23142 ай бұрын
Did you shoot without adjusting the zero? If so how was the accuracy without adjustment out to 25,50, 100 without adjusting the zero out of the box?
@johnjohnson34472 ай бұрын
Dump the music!
@天一生水-s2m2 ай бұрын
e管出去也是轨道2号线
@天一生水-s2m2 ай бұрын
冉家坝是新区,没有什么老店
@sioleon6693 ай бұрын
非常棒的地方
@perwiranegara46793 ай бұрын
Just by looking at the Black Thorn flesh u ate i knew it wasnt good. The reasons: 1) BT u had came from premature tree. Good durian is like a fine wine. It gets better when the tree is mature and tastes best when it reaches golden age. 2) If that BT u had was sourced from a farm within the island, then it most probably came from a young tree. Golden age BT trees exist only at mainland side of Penang, specifically in Jawi.. about an hour drive from the island. 3) Producing high quality durian requires deep knowledge, skills, discipline and experience in the field. Golden age tree alone wont guarantee that it'll produce quality fruits if a grower/farmer in charge lacks the characteristics mentioned earlier. 4) Sadly the quality of Malaysian durian is slowly degrading due to the mass production of fruits across the country. U wont be able to produce high quality durian if u prioritize on quantity rather than quality. 5) Synthetic and chemical fertilizers are heavily used to force trees to produce as many fruits as they can, thus compromising quality and our health. 6) Modern farming system practised by these commercial farms to maximize production is slowly destroying Malaysian durian's quality and reputation. If you are working against the nature rather than with the nature, then u'll eventually lose at the end.
@BodaciousF3 ай бұрын
wow thanks for the insights
@patrickwong93933 ай бұрын
黑刺太多小树结的果,味道平平。。。。
@leongkartat54423 ай бұрын
Dude, if you're still in Penang, you should definitely try 青皮15 and capri. Both are heavily flavoured with hints of whiskey. That black thorn you had probably came from a young tree, that's why it ain't good enough.
@BodaciousF3 ай бұрын
good insight. sadly Im not there now. Def go back for them next time.
@akubukankelkatu98043 ай бұрын
overrated❌ overpriced✅
@Awolf37663 ай бұрын
Put the large back strap on my Delta M very nice fit for my medium - large hands. Props to AREX for giving you 4 different size options, nice video on changing them out.
@Redmi-xu1yo4 ай бұрын
i love blak ton
@kailinchan12764 ай бұрын
你好 這個地址是哪裡?
@BodaciousF4 ай бұрын
在滨城佛学院对面
@YCTING114 ай бұрын
红虾没有只要黑刺😂
@stevewang52014 ай бұрын
谢谢你 从看你的视频让我们看到了世界各地的民生
@aloziechibueze3375 ай бұрын
I go through this thread and it is quite telling what is wrong with the world today. Everyone dropped their frustration with the same issues and bashed the company. But notice NO-ONE gave a final verdict on if they got their package ... was it later updated after certain amount of days .... Just an interesting observation about we as humans
@BodaciousF5 ай бұрын
yes when we received our packages the problem became less important haha I agree.
@Awolf37665 ай бұрын
So you have only about 200 rounds through it? My Delta M did that once around 150 rounds, I now have 2500 rounds through it and it runs like Swiss watch, I believe it is a break in issue, after about 500-700 rounds I bet it's gonna run butter smooth, hope it goes away, it's really a great pistol.
@zaidghansar78305 ай бұрын
What day is week and time was this? Was it busy?
@BodaciousF5 ай бұрын
Was a Monday night, not busy at around 10 pm but got busy around 1am. There was a line to the lounge. Thanks for watching.
@Destroy87075 ай бұрын
Songkran is good day for me 🎉🎉🎉🎉🎉
@Onehope19976 ай бұрын
WOW
@BodaciousF6 ай бұрын
Sorry for the flickering. I will change the shooting fps in the future. This was shot at 30 fps.
@Dragon927oob1006 ай бұрын
How much was the access fee ??
@BodaciousF6 ай бұрын
I got in for free because I have a Priority Pass membership. I would expect to pay around $50 per entry per person without it.
@rabiakhan77248 күн бұрын
How do you get priority pass membership and from where ?
@Rich-gs3bq Жыл бұрын
I'm dealing with this now. I got a gold chain being sent to me sent tracking number and was send ups next day air saver. So label created and sent on Jan 5 for next day air but tracking still only shows label created what the hell is the sender blowing a load of smoke up my backside. This is not a small time jewelry shop. It's a major online wholesale business. Has lifetime warranties on all its product. All reviews where great. Not sure what's going on I hate ups
@Ambig_ Жыл бұрын
Did the package arrive or at least get an update from UPS?
@cannix8055 Жыл бұрын
Wife bought PS5 from Amazon. Amazon tracking shows should have by 8pm today, ups tracking shows label created since 11/9 . Will update after say is over to see what happens.
@agator10008 Жыл бұрын
Still nothing?
@cannix8055 Жыл бұрын
@@agator10008 got nothing, ended up being the ups office seller dropped off package never got it to driver.
@davidadjetey4399 Жыл бұрын
I thought am the only one here, my wife shipped me a new MacBook m2 air from USA to ghana. At first it says item arrives in Accra and then later updated to item did not arrive. I have filed a claim for almost 9days and and nothing has been done. Please any help or someone who has experienced such, because I think ups is bullshitting
@cheechurb76962 жыл бұрын
I just bought this combo for $325 at a show in pa
@kevlar71282 жыл бұрын
do you punch them back in the same direction to install
@mariovazquez38742 жыл бұрын
I own a couple of guns and if I remember, every single one mentions in their manual to check and oil the gun before 1st use. And that one includes the tools, you only need a piece of cloth and a lubricant. And that's more important on imported guns.
@nicholashicks54632 жыл бұрын
Do this combo come in green dot?
@ketonshaw48092 жыл бұрын
Thanks for the content
@toddwiggins87242 жыл бұрын
The video answered some range finding questions for me, thanks!
@fleadoggreen90622 жыл бұрын
So frustrating,… Scan the damn packages. People!!! Frick !
@gzceronarmascortas79122 жыл бұрын
COMO LAS ESTÁ RAYANDO AL JUNTARLAS EL MUY PENDEJO. SE PUEDEN COMPARAR PERFECTAMENTE SIN LA NECECIDAD DE TALLARLAS UNA CON OTRA. POR ESO MUCHAS ARMAS TERMINAN CON UN ASPECTO DE ARMAS VIEJAS, CUANDO EN REALIDAD SE ENCUENTRAN PRÁCTICAMENTE SIN USO.. HAY QUE APRENDER A CUIDAR NUESTRAS ARMAS. NO SÓLO MECÁNICAMENTE, TAMBIÉN ESTÉTICAMENTE.
@adamxiong18172 жыл бұрын
Good to know stuff. At least you identified the problem. I never had any issues during break in. And I have an L. I also have a stand off compensator equipped. Maybe that is helping with the blowback pressure more on my L model, which would be more forceful on the slide return to battery.
@brandonlind57002 жыл бұрын
Some glocks do that also with non beveled striker blocks. The angle on the striker block creases friction on the trigger bar and causes it hang. I wonder if it’s a similar issue on arex? It looks like it has a different striker block but in simile location to glock
@MultiSweener2 жыл бұрын
Mine is 6 weeks old. Ftes like crazy. Many different types of ammo. Ruger replaced the slides assembly and barrel. Got it back last week, 80 rounds flawlessly then the trigger stopped engaging with firing pin. Many attempts. Sent it back Saturday. Let's see. Right now not even a considerable choice. So I ordered the Sig P365 in 380. Shouldn't be this way. Thanks for the post.
@gregorybloom18802 жыл бұрын
My Glock 48 had issues going into battery early on, enough to worry me about its reliability. A rigorous shooting session smoothed it all out along with the initially crunchy trigger.
@scarter1762 жыл бұрын
Mine shot 10 inches low at 7 yards. Ruger sent new barrel/slide and it still shot low @ 7 yards (now 6-8 inches). It’s back at Ruger now. I like the little gun but it needs to shoot closer to point of aim. Mine did not rattle.
@alpha29572 жыл бұрын
Quick question. Do you know if the Holosun 407K X2 Optic will fit the Arex Delta Gen2 Model L? Thanks in advance. 💯💯👍👍😁😁
@shabazz7172 жыл бұрын
I have a 800 dollar package sitting in the same Position. Luckily it’s insured.
@miladk.20642 жыл бұрын
Did you keep your drop-off slip? If you don’t have it, they will use it as a reason to deny insurance if you don’t have it.
@TheWilferch2 жыл бұрын
Good report.... You say that when a 10 rd mag is loaded fully to 10 rds, it's hard (or impossible) to insert into the gun WITH THE SLIDE CLOSED. Yes, true....but consider this--> for "old-school" auto pistols, cramming every last round POSSIBLE into the mag... wasn't the marketing point it is today. So on a "fully loaded" mag with these older style guns, you could STILL push the top round DOWN a bit, without excessive force, because the spring wasn't fully compressed. As a result, you CAN insert such a mag easily into a closed slide. NOT SO TODAY.....today's mini-guns used for carry have mag designs that ALMOST FULLY compress the mag spring, and allow VERY LITTLE extra spring compression. The springs are either FULLY compressed, or NEARLY so. This wasn't the case with older gun designs. See illustration here on the various MAX 380 mags...and notice how fully compressed the springs are. See here, scroll down....and you'll see an X-ray pic of how the rounds sit in the mag for MAX 380---> ruger.com/products/lcpMax/models.html
@jodyrogers40842 жыл бұрын
I got mine can't hit shh after 7 yards getting a laser for it it's still a nice gun to own
@havbauer7172 жыл бұрын
I recently purchased the Delta Gen.2 M with intention of using it as an EDC. Overall I am very pleased with the form, fit and function with one major exception. I found the trigger pull to be gritty with a very wide span and irregular poundage varying from 6.1 thru 8#s. Nothing ab out the trigger pull was consistent. I spoke with Global Ordnance, the U.S. agency who said the trigger pull was normal - at 7 to 8#s. Any attempt to polish the trigger mechanism would void their warranty. I have taken another path in an attempt to lighten the trigger pull. PLEASE understand "I am not recommended to any one". I am having my cerakote expert remove the factory trigger assembly coating and replace it with a cerakote product called Microslick in hopes it will reduce the the pull. Again, I do not recommend any one else do this. Thank you for taking the time to read of my experience.
@urosmlakar94682 жыл бұрын
You’ve put only 2 out of 4 screws for mounting type 2 plate on the slide. Why not all 4??
@rickeyxiong32422 жыл бұрын
Dang i looked everywhere the combo set doesn't comes with the HS510C riser i have to buy it separately off from Amazon for $30
@casmithc22 жыл бұрын
The noise you hear when pulling the trigger is not the trigger. It is the hammer spring. This gun is hammer fired and not striker fired. Ruger uses a long hammer spring that creates the sound you are referring to.
@mikedickinson97302 жыл бұрын
They most likely do the cardboard box to save the plastic from scratching.
@ralphcantrell32142 жыл бұрын
Trying to track packages has become a futile waste of time across the entire industry. Though USPS is and always has been the worst in this regard, ALL package carriers - UPS included - are starting to suck in all services across the board. These days, I simply do not order anything if I really have to have it in my hands by the due date, as I pretty much know it isn't going to happen and NOBODY'S tracking system actually works anymore.