Пікірлер
@travislemarr9900
@travislemarr9900 6 күн бұрын
👎
@HVAC_Tips_Tricks_Calcs
@HVAC_Tips_Tricks_Calcs 7 күн бұрын
I wear mine walking into the job, especially if there are additional fuel burning appliances on site. You should wear it most places. You won’t believe where you can find CO. Pool heaters are a big offender, and mine kept showing high CO on our rear balcony on a cruise ship
@DougPoling
@DougPoling 7 күн бұрын
If we use a new equipment, you get 40.4 when it’s calibrated for methane and 18.4 and 12.4 of these levels considered high
@primusheating1
@primusheating1 12 күн бұрын
😂
@frankgall6
@frankgall6 13 күн бұрын
I spy waffles
@simpleman9991
@simpleman9991 18 күн бұрын
acceptable to cover hole with high temp silicone?
@IceWhiteice22
@IceWhiteice22 22 күн бұрын
I be thinking the same thing
@hvacshinobi8047
@hvacshinobi8047 22 күн бұрын
Wish I could snag the digicool in the background how much you asking
@IceWhiteice22
@IceWhiteice22 22 күн бұрын
I be thinking the same thing
@joecox9958
@joecox9958 29 күн бұрын
very nice but no real brazing, problem is the connection is different than oxygen-acetylene, If they are the same I will buy one.
@katiaquirino9507
@katiaquirino9507 Ай бұрын
Poderia me passar um tutorial do início ao fim de como saber o co e con ?
@HorshamHeatingbollox
@HorshamHeatingbollox Ай бұрын
I’m a gas engineer over here in England I bought the 030 just for domestic boilers it lasted 2 weeks and was fucked sent it back told it was repaired and re calibrated same thing false readings battery bolloxed. Got a full refund don’t buy it as it’s dog shit
@sunnydays4966
@sunnydays4966 Ай бұрын
I was probe
@jorzer18
@jorzer18 Ай бұрын
Nice simple explanation! I need that sign behind you! Because that's sign is as accurate as your explanation 🤣
@TruTechTools
@TruTechTools Ай бұрын
You've given us an interesting idea..!
@anthonybernier9952
@anthonybernier9952 Ай бұрын
Got a copy of one of theses trainings? I’ve seen others of Tyler’s on KZbin.
@nsudatta-roy8154
@nsudatta-roy8154 Ай бұрын
Fascinating conversation.
@gopalshaha5896
@gopalshaha5896 Ай бұрын
Informative video. But I have a doubt. Why does spiral and round duct requires 2 wholes where rectangular ones need only one?
@TruTechTools
@TruTechTools Ай бұрын
A single point measurement can be used in round or rectangular duct, the accuracy is generally lower with a single-point measurement though. If higher accuracy is desired, a multi-point test using five test holes in rectangular and two test holes in round duct can be performed.
@StephenRardon
@StephenRardon Ай бұрын
Julian's story is such an inspiration!
@jorzer18
@jorzer18 2 ай бұрын
This is awesome!! I have an 8yr old daughter and have been considering a KZbin channel dedicated to teach her the trades. I'm a licensed plumber and HVAC. With all the KZbin kids watch, especially my daughter, i thought this might be something constructive. I'll start following your channel Elana😊
@brianmcdermott1718
@brianmcdermott1718 2 ай бұрын
Still a Good video. Thank you , Jim 👍👍👍👍👍👍👍👍👍.
@MoreHeatMoreCool
@MoreHeatMoreCool 2 ай бұрын
WHat's that static PSI look like?
@Pigsandpies1984
@Pigsandpies1984 2 ай бұрын
In an era of BS, this is the one thing that’s actually real. A skilled licensed trade doesn’t come easy, but the life it affords is pretty great in the long term. HVAC, plumbing, and electric at the way to go.
@frankgall6
@frankgall6 2 ай бұрын
Omg Corbett he looks sooo much like Grace wow ❤
@frankgall6
@frankgall6 2 ай бұрын
The A-Team
@hermawany1720
@hermawany1720 2 ай бұрын
Can 327 analyze for Natural Gas ?
@TruTechTools
@TruTechTools 2 ай бұрын
A testo 327 (or all combustion analyzers for that matter) analyze the flue gas after combustion. You would need a combustible gas leak detector (not analyzer) to detect natural gas. :We sell them at TruTech: trutechtools.com/gas-leak-detector.html If you truly mean analyze natural gas for what it is made of, that is usually not found in a protable instrument.
@boyddustin
@boyddustin 2 ай бұрын
Jeez I needed this
@sohoceansurferor5929
@sohoceansurferor5929 3 ай бұрын
Great up-to-date info., thank you for posting. Cheers from Vancouver Island.
@JamesAgans
@JamesAgans 3 ай бұрын
All the nay sayers on KZbin are knocking the hell out of these. I spoke with a well respected HVAC tech a couple of days ago whi said this is all he uses any more. I distinctly remember the pro plumbers who po pood PVC drain pipe many years ago. They swore that would not work too. Im pretty sure the nay sayers are scared shirtless of guys like me that do all my own work. The REASON that I do all my own mechanical work is because every single time i had a so called pro do anything, they fucked up the job. There are very very few real pros out there today. Most are new system sellers, or parts canon people.
@StephenRardon
@StephenRardon 3 ай бұрын
it is a GREAT program!
@HVACRTECH-83
@HVACRTECH-83 3 ай бұрын
Looking to purchase a flow hood for a school district. 5 schools with mostly geothermal hps for every classroom, ranging from 3 to 6 ton for classrooms, gyms are 15 ton heat pumps and cafes are 8 ton. Looking to find a capture hood that will work for all of the systems but not sure if one exists, there's registers that designs are as low as 150cfm and the gym units are 1020 cfm per register. But the returns if I was going to test those in the gym are 3500cfm through a 32x32 grill and in the classrooms many are 24x36 return grills with up to 1800cfm. I've heard if I get the high cfm hood, it won't be accurate for low cfm even though they advertise the hood to be good for like 50 to 2500cfm. Looking to purchase asap but don't want to use something I can't trust. Any advice would be very helpful. Thanks in advance to anyone that can help out
@TruTechTools
@TruTechTools 3 ай бұрын
We'd be happy to help guide you through this and either get you the right tool or point you in the right direction. It's best to call us at 1-888-224-3437, ask for Josh. Thanks!
@KuchMagor
@KuchMagor 3 ай бұрын
South Sudan
@KuchMagor
@KuchMagor 3 ай бұрын
We pray to Almighty to give you more blessings ahead in the field of HVAC industry. Thank alot Jim watching from South in African continent
@HVACRTECH-83
@HVACRTECH-83 3 ай бұрын
Whats funny is the 8.5 duct diameters thing, ive seen manometer manufacturers say anywhere between 8 and 13 ft downstream and 3 to 6 upstream from restrictions or changes in duct. In the real world, when is that ever even close to possible. I havnt found many if at all in my 27 years. So makes you wonder
@HVACRTECH-83
@HVACRTECH-83 3 ай бұрын
I know this is old but figured i mention for anyone considering getting this, seems to be ok for smaller airflows like residential and small commercial systems but i havnt had much luck with mine on anything over about 2000 cfm for some reason. I could do a 5 point 6 times and each time would have very drastic varying results like over 1000 cfm off. I try to keep it as strait as possible and timing equal on each hole but just cant trust it.
@HVACRTECH-83
@HVACRTECH-83 3 ай бұрын
Honestly not sure how much I would trust any of this guys info here. When asked the tonnage of the equipment he strait up said idk,I never looked at the air handler. How are you going to set required airflow without knowing how much the system should have to begin with? You don't. Some units have a max static of .5,some .7 some 1.0" sooooo..... the equipment/design is where you start and end. Who cares if you get the wanted cfm to each register when the equipment itself may be suffering for it. I just don't get this,I'm also not finishing the video so if he somehow redeems himself I apologize.
@East_Owl
@East_Owl 4 ай бұрын
Update this topic with a new video! Great info!
@HVACRTECH-83
@HVACRTECH-83 4 ай бұрын
Erics a super smart guy and i have alot of respect for him but this short was very useless/pointless why post this?
@JoseRodriguez-kx9gz
@JoseRodriguez-kx9gz 4 ай бұрын
Where can i get the static pressures probes.
@brianmcdermott2430
@brianmcdermott2430 4 ай бұрын
Interesting discussion. Thank you , Jim and guests.
@RayRay-nb7tn
@RayRay-nb7tn 4 ай бұрын
Hey Stephen
@StephenRardon
@StephenRardon 4 ай бұрын
Hey Ray!
@The714Formula
@The714Formula 4 ай бұрын
I’ll be at 2025 AHR
@UncleEarlHeatingAirCondition
@UncleEarlHeatingAirCondition 4 ай бұрын
Good to hear from you, Stephen, and thanks for having him on
@JJsSwage
@JJsSwage 4 ай бұрын
Wish I'd seen this I bought the old
@DanJ-c9c
@DanJ-c9c 4 ай бұрын
kzbin.info/www/bejne/opiZZpZ-rpyYh7M
@Mikecianfrocco
@Mikecianfrocco 4 ай бұрын
I gotta go back to work see ya guys
@Mikecianfrocco
@Mikecianfrocco 4 ай бұрын
Hit Da Flag!!!!!
@Mikecianfrocco
@Mikecianfrocco 4 ай бұрын
Because people always ask Eric online why is my Unit broken and he gets a screenshot of just subcool and supeheat
@Mikecianfrocco
@Mikecianfrocco 4 ай бұрын
Thanks for everything Jim!!!
@Mikecianfrocco
@Mikecianfrocco 4 ай бұрын
Jim needs no introduction
@Mikecianfrocco
@Mikecianfrocco 4 ай бұрын
The 3 hvac amigos!!!!!
@Mikecianfrocco
@Mikecianfrocco 4 ай бұрын
🎉🎉🎉🎉🎉🎉🎉🎉🎉