So replace clear the code and take for a test drive

My 1983 f150 just had motor replace, but now a bad brakeline leak at a junction.

Jesus christ. Wah5 a lousy out of focused worthless video

I got same problem 😊

Bmw e39 trans failsafe mode rejime😒

Bmw e39 trans failsafe mode rejime😒

How did you place the washers in there at 3:04? Thanks

Thank you mine just did it and it’s 50 degrees outside I was on my way to take my kids to school. Had me thinking I was about to spend $1000s at the dealership 🤦‍♂️😭😂

had to do two of these i ended up cutting out the stupid rear spagehtti sunnshade i have tinted windows fck that and the other one is broken (shade)

Thanks!

Great video!! It helped me to get home last night after the parking brake got stuck! Thanks a lot!!

On the top of the valve stems above the springs are there 2 one for each valve a little metal cap that goes on top that is between the tappet and valve

Wow was such a great video and I was hopeful, but no update about the replacement and putting it together. Were you successful?

You are the best 👌

Best video ever

The motor on my actuator stays running sometimes when the car is turned off would you know what caues that but i have all ABS lights are on and brake malfunction light on also just wondering why it stays running done replaced the abs module and it did nothing and the wheel sensors are all good

What if the cord won’t come all the way down to put your spare tire back in there?

As a 97 and 98 owner...pain in the ass! I've done it multiple times, and curse Jeep every time...and the mix of metric and standard crap in those years!

Big pin 750 engines didn't come out untill 1996 and they were teal.

The car drives fine most of the time, but when I try to accelerate to around 30-40 miles per hour, the automatic transmission shifts gears suddenly and the engine revs up from 2,000 to 3,000 RPM. It feels like the engine and transmission aren't connected. If I let off the gas pedal and try again, it usually works fine and I can keep accelerating. Is that the fair symptom and may pinpoint to solenoid replacement? If not, let me know what's fitting to this problem and need to look at. (Jeep Grand Cherokee Laredo, 1998)

Could you do this with a center punch indent it and knock it round ?

Thank you! First time with one of these carbs. Would have never figured out that little spring. Rebuilt the carb and it's perfect, no more leaks and has way more power!

Thanks!

Please delete this video

Thanks

Finally!!! A video that gets straight to the point without the excess talking. Great job sir!

Thank you for sharing this. Saved me some $$$. I had multiple ones that weren’t all the way pushed in.

Hey i have a 1994 kawasaki xi 750 ss and in the water it wont rew over 5.5k.rpms. on the trailer it rews just fine and all. As soon as it hits water it cant go.over 5.5k. do yoi know something about that?

thanks for wasting time

You suck! Get someone else to hold the camera. You can't see what your doing.

Excellent video sir, helped out alot, thks!

There is no trim my brother has one of these

Many times it's the sensor on the throttle body that is failed. Some contact fingers get fused together

A HUGE thank you for this. Had to search find. No other videos described how to properly install the float.

Thank you, I have a tethered flag I will drop off at my local VFW today.

The buzzing sound is coming from a relay

You said having a shift problem. You never explained what kind of shift problem you were fixing

Stupid

Thanks for the info, I'll be looking for a leak myself.

These fuse boxes suck....good to replace them ever few years

didnt work for me, too bad

Mine turns on sometimes, in the heat it seems to fail. Just replaced the blend door actuator, gear was cracked... still not turning on 100% of the time

Thanks! I had the same problem and just fix it!

Use a pair of needle nose pliars to grab the screw after it's loose

Short and to the point. Thank you 🙏🏼

How do I fix my transmission that will drive and shift in all the gears but when I want to reverse it you can hear something catch but it doesn’t want to go anywhere. What can I do?

WOW it worked. You’re a lifesaver man.

Nice find dude

Tried all that. Still blowing hot

I just did this on a 06 grand cherokee 5.7hemi. This way worked. But if you have huge hands or large fore arms probably not do able.