KBCabinets

Пікірлер

@ElizabethDillard-t9x 7 күн бұрын

Hey, I just started using Cabinet Vision in March. I've had struggles to say the least. I am currently trying to tackle illustrating fluting on a complete wall. It's not that the CNC needs to cut it but that the customer needs to see it in the drawing and 3D render. I have tried to apply a case molding, too many paths. I have tried to upload a photo into the textures and apply it to a panel, no dice. I have tried making the panel a beadboard door, no dice. I'm not sure how to accomplish my goal and my experience in the program is limited so I don't know the best ways to manipulate it yet. Have you done this before or have any advice?

@BakerDerekj 14 күн бұрын

flutes are just lines in the panel evenly spaced. usually using a miter miter bit 1/8" depth into your panel. just for looks mostly

@beepsntones 21 күн бұрын

What is the ipm on it, its cool , and which bit are you using?

@ChrisAustin-x9c 25 күн бұрын

Very well done. Thank you

@JasonFalls-b3p 26 күн бұрын

Thanks for your review and we are glad you are happy with your Cefla equipment! Just to clarify, the Unidry does not use UV energy for curing. The catalytic heater is a type of heater that emits infrared heat in the form of medium to long infrared waves.

@aragorndedolor4171 27 күн бұрын

This video is ment for a beginner in making cabinets..? In order to be able to follow this workflow you do need a full 1,25x2,50 meter cnc bed... Majority of beginners don't start there cnc journey on a (semi) professional machine with vacuum holding and automatic tool changer. Majority of beginners will have something in the range a 6090 and will be able to machine a board of 620x2440mm (½ a sheet). Your workflow will drastically change on those smaller beginners machines.

@cnc-routers-uk Ай бұрын

if not using a drill- make the 3 circles into one pocket. much faster and not kiling the tool with multiple plunges to obtain the same result.

@wtcbd01 Ай бұрын

Thanks so much for the measurements and clear instructions. I learned some tips on shortcuts with moving and guides(which I think are mandatory). Some quick tips...you can enter fractional numbers and hit your = (equals) key and it will automatically convert it to decimal in the entry fields. so for ex...you have a guide set and you want to offset it 3/8 of an inch...you would just enter (3/8) and hit your = key and the number will convert in the box to .375. Also...lets say you want to move something that is some random set place on your door but you want to move it 3/4 to the right, you would set a guide to the point it exists now, right click to open guide properties and in the "new position" box..scroll to the end of the numbers already existing and type in +3/4 then hit your = key to have it automatically calculate the new position and hit apply. so in the box, it would look something like this... 5.678123+3/4...hit your = key and it will now show 6.428123 as the new position and just hit apply. This works for any input box that accepts numbers. The key is the hit the = key right after you do your math. Sorry for the long post and great video.

@mr.nathan4972 Ай бұрын

What screws or nails did you use to secure the 2x4s. Can’t be anything too long it looks like.

@snydrnck Ай бұрын

How much?

@cesarsandoval3379 Ай бұрын

I have a quick question, how do you make it a dadoed back? Can you make a short video?

@KBCabinets Ай бұрын

Are you meaning a Dado on the back where the floor/shelf/ or top of the cabinet touches it?

@willa5547 2 ай бұрын

My version does not have cam editor. Its the newest version

@KBCabinets 2 ай бұрын

What version do you have? I am in 2023.

@TheLawnTools 2 ай бұрын

Show the behind the scenes!

@KBCabinets 2 ай бұрын

It’s our secret sauce!

@dashaivy 2 ай бұрын

Thank you, it was very helpful !

@KBCabinets 2 ай бұрын

Thanks! I appreciate the comment!

@iyoreaisosa2099 2 ай бұрын

Very nice video

@KBCabinets 2 ай бұрын

Thanks I appreciate that!

@aamirsheikh8306 2 ай бұрын

Can u please make a video on cabnit sense which is an extension of sketch up

@cmat3272 2 ай бұрын

Not sure where to turn next as I have spent a couple of hours with a tech trying to solve but I installed 2023 update from v11 and now uniboard and prism texture packages will not work. Can’t find any answers or even info on where to purchase or download anything. I can download onto my computer and when I import them, says they imported but then not showing up anywhere. Very strange and tech says might be because advanced no longer will work? Doesn’t make sense because it’s the same package I’ve been using for over a year. Like the software but really tough finding answers so hoping maybe someone will see and know of a solution.

@BillM61440 2 ай бұрын

After you download the package you have to "install" it in Cabinet Vision. To do this you'll need to have all jobs closed and be at the beginning splash screen. At the top of the screen you'll see the "File, Main, and Utilities" tabs. Go to the "Utilities" Tab and click on "Setup Package", and the "Package" dialog box will appear. Click on the "Import" tab, then click on the "Open Folder" Icon. This should automatically be directed to your Download directory. If not, find your downloaded file from this window and select it, then click "Open" in the lower right corner. (The right side of the Package Window should now display the package you downloaded with check marks next to each new feature, along with a Green, Red, or Yellow button - the colored buttons are labeled just below as to what they mean. You can pick and choose what parts of the package you want to install from here.) For the most part, because this is probably a new package for you and you wouldn't already have it on your computer - don't worry about the "Add Prefix" button; in the "All Matches" box have the "Use Existing" button marked; leave the "Child Matches" area blank; and leave the "Toggle Overwrite" button alone. Click on the "Import Package" button. (You'll see a progress bar at the top right of the screen indicate that it is installing your package, and an "Import Complete" box will appear when it is finished.) Click "OK" on the Import Complete box, close out of that box, and you're all set. You're package should be ready to use.

@BillM61440 2 ай бұрын

Re-reading your question here, it looks like this issue MIGHT be a bug with v2023.(?), like your tech indicated. At first glance I thought you were talking about installing a typical package, but now I think you're talking about upgrading from v11 to 2023 where something broke. Upgrading from v11 to v2023.1 and/or 2023.2 can be a good upgrade. There are many new features, but also a few bugs. I would NOT recommend upgrading any further until v2024.1 comes out. The last versions 2023.3 and 2023.4 make the program VERY SLOW, and added a number of other bugs. They know about these and have the 2024.1 version in Beta now. It's running late for release, but better that than another broken version. From the Beta testers responses so far, things are fixed and it's looking better.

@xavierlx 2 ай бұрын

@@BillM61440 Sorry but I have to step in here. 2023.4 is not "slow" it was all caused by a microsoft update to the Access database engine 2010x32 and 2016x64 the slow issue is very solvable by tech support

@dannynesbitt6181 23 күн бұрын

I believe your answer is this one. "What is happening is when you import the textures, they are being placed the CV 2023\Database\Graphics folder, and they should be placed in the Common 2023\Database\Graphics folder. You can navigate to the first folder, copy the thumbnails, and paste them into the correct target directory. "

@axb-dj8nz 3 ай бұрын

Beautiful and satisfying!😊

@enrikopalo 3 ай бұрын

how much is the software and where can I get it

@dauide85 3 ай бұрын

wtf your imperial system is really f**ked up. really. 16,3872 wtf number is that!??

@blt981 3 ай бұрын

Brother I love you thank you soo much no one has anything like this so I need to make one for my remodel my house…

@KBCabinets 3 ай бұрын

Thanks man! I’m glad I could help you out!

@jessidrumm 3 ай бұрын

Hi Rob, I was wondering if you knew a good source to purchase credible DXF Files with its corresponding tool paths and tools. I also use VCarve for my programming

@KBCabinets 3 ай бұрын

Are you looking for DXF files that come pre made with all the paths and tooling assigned to them?

@jessidrumm 3 ай бұрын

Yes. That would be extremely helpful

@itslike123 3 ай бұрын

Primary means you making this cut out on the part that touches it and not on the end part it self

@KBCabinets 3 ай бұрын

Thanks I really appreciate you clarifying that for me!

@LV-lb7dt 3 ай бұрын

nice

@KBCabinets 3 ай бұрын

Thanks I appreciate the comment!

@michaelm9446 3 ай бұрын

Hi, the CV is great if you have to do a lot of standard cabinets, but can it be used to make a one off custom cabinet where every part is placed manually? After reading all the manuals and watching all the videos available, the answer is still not clear. For example, I have an empty base cabinet and I placed the left end and a door - hinges are not automatically added, and there seems to be no way of adding them manually using menus and dialogs. Is it possible at all? Thank you.

@xavierlx 2 ай бұрын

The answer to your question is yes you can absolutely place every part manually if you wish. you can hide all the parts in a cabinet and start from scratch or hide just certain parts and manually add others.

@bherllynejumilla3723 3 ай бұрын

Subscribed! Looking forward to more Cabinet Vision Tutorials 😊

@cabkoinc.7137 3 ай бұрын

I'm about to get one. Do you still like it after 6 months? There are some negative reviews out there...

@KBCabinets 3 ай бұрын

So far it’s been pretty good. Definitely an upgrade from what we were using before. I really like the glue jet system. They only issues we have had so far is there is a piece of sheet metal over the conveyer belt at the out feed area that is meant to keep any debris from traveling down into the track area. A piece of wood somehow got pushed down and caught the edge of it bending it up. No idea how it happened but we straightened it out and it seems fine so far