what is the diffusion range on this ?and absorption range when using 4 inch rockwool? are we looking at at least 350hz absorption ..then diffusion 1khz to 4khz?
@boyxnine7193Ай бұрын
Wow it look AWESOME ! Mine are ugly.. but well they work 😅
@ArikLivnatАй бұрын
Thx man. If they work good 4 U
@authenticNL22 ай бұрын
You play the saxophone, know how to work with wood, good cinematography, wonderful video!
@ArikLivnat2 ай бұрын
Thanks my 🎷🌈
@DjSabzi2 ай бұрын
How much?
@ArikLivnat2 ай бұрын
Not for sale😀
@TheSpeedyr62 ай бұрын
Will thinner plywpod can work
@ArikLivnat2 ай бұрын
Yes you can if not to hang on the ceiling. (It can have belly)
@Yawsounds3 ай бұрын
🔥🔥🔥🔥🔥
@ArikLivnat3 ай бұрын
Tnx🎶
@BjoernLewin3 ай бұрын
okay… or i just use any other wood from a store…?
@אריקלבנת3 ай бұрын
Any wood is good 👍 I like to recycle
@Yawsounds3 ай бұрын
Great music. Great builds. Subscribed 🔥🔥🔥
@ArikLivnat3 ай бұрын
Thanks 🎶✌️
@ikmalhishamzainol84803 ай бұрын
Hi, what is the approximate weight of the diffuser ?
@ArikLivnat3 ай бұрын
Hi it is very heavy… don’t know because it is already on the wall
@ikmalhishamzainol84803 ай бұрын
@@ArikLivnat thanks for the reply man 😃
@orrinagner57964 ай бұрын
The only reason this works is the blocks are glued to each other. The end grain of the lumber will not have a good bond using wood glue. It is like a bunch of straws and the adhesion is not strong. It’s probably best to add a few mechanical fasteners to attach to the backer
@ArikLivnat3 ай бұрын
Yes but Everything is well glued with carpenters gule to each other and to the board. Till now didn’t have any issues…:)
@studiooversound65974 ай бұрын
According to the averages of your PDF, the remainders at the continuous ends that are 3.75 and not 7.5 are 30 spaces of 3cm and 21 spaces of 2.5, this would give 112.5 cm
@studiooversound65974 ай бұрын
what is the bit model?
@ArikLivnat4 ай бұрын
Size or model?
@studiooversound65974 ай бұрын
@@ArikLivnat model
@ArikLivnat4 ай бұрын
@@studiooversound6597 It's a 1/4 inch router, I don't know which model, but there is a sketch that shows all the info. Link in the info of the video
@chrisrussoroos60914 ай бұрын
Great music - really nice gobos thanks for the ideas
@ArikLivnat4 ай бұрын
Thanks my friend 😊
@LookBettervideo4 ай бұрын
מרגש, עצוב, מאוד יפה.
@ArikLivnat4 ай бұрын
תודה תמר❣️
@Vindexi5 ай бұрын
For safety reasons you shouldn't use gloves with rotating tools. Instead of a scratch on your skin the glove will get cought and pulled in. Nice video nonetheless.
@ArikLivnat4 ай бұрын
Thanks 🙏 yes after this video I took off the gloves
@RY-fe3rt5 ай бұрын
Very nice! I also appreciated "Dickie Greenleaf" on the soundtrack! 😁
@ArikLivnat5 ай бұрын
Thanks ❤
@טווסהזהב5 ай бұрын
מעולה
@ArikLivnat5 ай бұрын
TNX:)
@ArikLivnat5 ай бұрын
✌️
@goldenepaveh5 ай бұрын
אריק גם השיר וגם הקליפ מרגשים😍
@ArikLivnat5 ай бұрын
🎶🎶🎶🙏🙏🙏
@ArikLivnat5 ай бұрын
תודה
@shirabenzeev15995 ай бұрын
שיר חזק. מרגש ❤
@ArikLivnat5 ай бұрын
תודה🎶😍
@tavasmedia80365 ай бұрын
מרגש!! בהצלחה
@ArikLivnat5 ай бұрын
תודה🙏
@ephraim72786 ай бұрын
איזה שיר יפה!! עצוב אבל נעים להאזין וגם לצפות. מילים ומנגינה מרגשות. מאוד אוהב❤
@ArikLivnat6 ай бұрын
תודה רבה. גם התגובה שלך מרגשת 😍
@ArikLivnat5 ай бұрын
❤
@עינבכץקראיםאימוןסדנאותוהרצאות6 ай бұрын
מקסים ומרגש
@ArikLivnat6 ай бұрын
תודה עינב שמח שאהבת!
@scotthull44006 ай бұрын
We use the French cleats in our studio so we can convert the space from live to dead in seconds. :) great minds think alike. Nice video. Three wheel - excellent idea.
@ArikLivnat6 ай бұрын
Thanks 🙏 yes it is definitely doing the job. 🎶🎷👍
@zombieman36266 ай бұрын
Most expensive box ive sern in a min
@ArikLivnat6 ай бұрын
Yep😀
@aprop5447 ай бұрын
Hi, the measurements in the video do not match the pdf on your site. Are the holes 22 or 21? The measurement of 7.5 cm cannot be...
@ArikLivnat7 ай бұрын
Hi the PDF is the right paperwork
@aprop5447 ай бұрын
@@ArikLivnat I can't agree with the measurement on the paper work of 7.5 cm... maybe it should be 3.75 cm
How did you calculated holes (it depend of frequency)?
@ArikLivnat8 ай бұрын
Yes you can find my plan in the description there’s a link👍
@thePlantdaddy9 ай бұрын
Wow amazing
@ArikLivnat9 ай бұрын
Tnx🎷🎶
@luckyjinxer9 ай бұрын
For the curious - 'A Night in Tunisia - Dizzy'. Great job on both the playing and stand!
@ArikLivnat9 ай бұрын
Yep Tnx🎷👍
@purplerider23629 ай бұрын
Dude. You do all this stuff?? Amazing! 🤩
@ArikLivnat9 ай бұрын
Tnx🎷🎶
@1Tibs110 ай бұрын
Love the sax, so soothing and the table was nice too.
@ArikLivnat10 ай бұрын
Tnx my friend 🎷🎶🌈
@emrehanli10 ай бұрын
Holy shit! Never expected "metabo dh 330 unboxing" query to return this... You guys blew my mind!
@ArikLivnat10 ай бұрын
🎷Tnx
@joyandpeacefullaughter530710 ай бұрын
I love this video.
@ArikLivnat10 ай бұрын
Tnx🎷🎶
@jean-baptiste923011 ай бұрын
Are those random slots?
@ArikLivnat11 ай бұрын
No, Not random 👍
@purplerider236211 ай бұрын
Where do you get rock wool that big?
@ArikLivnat11 ай бұрын
It’s standard size you can find it hardware store that has acoustic treatments
@mrcrowleyoz11 ай бұрын
what is it for?
@ArikLivnat11 ай бұрын
Acoustic panel separator
@Groove81TV11 ай бұрын
Nice work !
@XTSM1 Жыл бұрын
I would like know math involved as I need design my own panel of different sizes.
@nodnodwinkwinkV Жыл бұрын
It looks nicer than a regular acoustic panel but wouldn't the hard surface of the wood still be very sound reflective?
@ArikLivnat Жыл бұрын
It is used for absorption but also for diffusion, both in on element
@84ZERO44 Жыл бұрын
in what frequency range does it work thanks
@ArikLivnat Жыл бұрын
Hi, it absorbs more low frequency, below 300Hz - but less high frequency - above 600Hz.
@Oneness100 Жыл бұрын
Those types of diffusors are only a small bandwidth of high frequencies. they do not have the range that a Quadratic Diffusor does. The problems with Quadratic is you need distance between the diffusor and the listening position, and they are costly, especially when you consider that you're going to need at least 70% surface coverage to get a proper diffused sound field, so you're entire rear wall would almost have to be covered with Quadratic Diffusors. But those BAD panels you're making only diffuse higher frequencies. Quadratic Diffusors, the higher the Prime Sequence and the deeper the cabinet can go down into the mid range frequencies down to 200hz for a Prime 23, but there are expensive. There's a company that sells Build plans to make Quadratics and other treatment for low frequencies called Acoustic Fields, so if you're a DIYer, I'd check them out, they have the best low frequency absorption technology using Activated Carbon and their unique Diaphragmatic absorption cabinet design.
@ArikLivnat Жыл бұрын
Made 4 of them, working great in our studio, musicians adore the result. It absorbs more low frequency, below 300Hz - but less high frequency - above 600Hz. We tried some of the other you mentioned, we didn’t like. Sorry good luck👍
@Oneness100 Жыл бұрын
@@ArikLivnat What did you try that you did't like?
@Oneness100 Жыл бұрын
@@ArikLivnat You made 4 of what? What products did you try that you didn't like? Your comment was very vague and cryptic.
@ArikLivnat Жыл бұрын
4 of what I built in the video. We tried a a professional quadratics panels manufacturing… and we didn’t like the results at all, so I decided to build them. So much better… best🎶👍
@Oneness100 Жыл бұрын
@@ArikLivnat First off, you don't sound like you have a strategy for treating the room. You first have to figure out what the problem are and then pick the right treatment, and place it within the room to fix those problems. Just buying treatment and sticking it in the room is a time/money waster because you don't have any strategy. Quadratics work great, but you need to have the rest of the rooms' problems fixed first AND you need to have make sure you have the right Prime Sequence for your room. Not all rooms have enough distance and if you don't treat the other problems in the room, then Quadratic won't work. For room treatment, the biggest problems are low frequency Axial mode problems. Those are the biggest problem with most small rooms and they require a lot of space, and are costly as they tend to be at least 12 in deep cabinets that can also get as much as 16inch deep and you need to have a fair amount of them starting with the front of the room where the source (speakers) are located working your way to the back of the room. BAD panels are NOT going to fix low frequency problems that are in that 30hz to 50hz range. They are simply not the right type of treatment for that. BAD panels are also not wide range diffusors like a Quadratic. Yes, they might absorb down to maybe 100hz, but depending on the material and thickness, they can only do so much in terms of amount of absorption. As far as diffusion, they aren't going to diffuse a wide frequency range, they only diffuse a small range in the upper frequencies and that's all they really do in terms of diffusion. But the first thing first, what are you using the room for and what are the dimensions so you can figure out the low frequency problems first. I seems as though you are only treating reflections and no pressure based problems in the room. Also, to really treat a problem, you need at least 50% to 70% surface coverage.
@EdsonVazLopes Жыл бұрын
Excelente!
@EdsonVazLopes Жыл бұрын
What are the dimensions of the cracks? Can you provide the project?
That's an amazing job .. I wish you were talking in the video and explaining it. I bought the tools to try to build it I didn't have a router lol. Btw fellow sax player here your tone is amazing
@ArikLivnat Жыл бұрын
Thanks my friend. I admit that talks about the process would have helped but as a musician I prefer playing..🎷😄 I’m trying to combine both arts… go get the router and start your project💪 good luck 🍀
@mrcrowleyoz Жыл бұрын
Does it help reduce the sound of a saxophone through thin apartment wall?
@ArikLivnat Жыл бұрын
It helps a lot in reducing but not absolutely separate