@@pashameshcheriak8281 all in 1080p

@@berked4533 something to do with obs running in the background. without it im getting 250+ fps

@@lance8781 sure, I'll include that in the part 2 of the 4060 benchmarks

I'm using an NHD-14 from my older builds

Im in the process of recording benchmarks for valorant, cyberpunk, rdr2, wh40k, and spiderman miles morales. Let me know if you have a specific game you want me to check out

tjmax for ryzen 5000 is 95c, but I personally would want it to be below 80c. Temps are normal

That depends whether you prefer the portability of a tablet or not. I'd go for the PC all the time but it still depends on what we need to do.

Did you use any GPU?

@@marvinlourencehomoc3202 At this video no. I only used the IGPU of the 5600g. I'll try reinstalling Wuwa later to test how it runs on 5600g

@@pitracks Thanks for replying 🫶.

You need an overclocking motherboard, the ones made by the main brands and not the chinese ones. BCLK overclocking

this is from r20 not from r23

..is r23 not just an updated version ?

@@999adam999 test r20 and see the results for your cpu. 23 is the newest version, the scores on 20 and 23 will never be the same

You cannot compare results from different versions of cinebench this cpu on r15 gets like 1000points, 2000 on r20 and 5000 on r23

my cpu is a bit better than your cpu, but you should still get good fps. i had an older cpu that ran destiny 2 with the same card

@@pitracks so having a good cpu is responsible for good fps?

@@BigFloppa-_- hey my bad, i thought this was commented on my other video. your cpu is better than the cpu used in this video. you should get abit more fps compared to what im getting here

@@pitracks so am i able to play destiny 2 good with great fps because im moving from ps4 to pc and i just hope i can run destiny 2 good on my pc better than my ps4

@@BigFloppa-_- yes, you should be able to play the game with no problems at all, if ever you think that the fps isnt that great turn down the shadows

i will only recommend the 1366 system if you can find a good deal on an overclocking motherboard, and if you did go with x5675 its a better chip and you should be able to achieve 4-4.3 ghz though your temperatures might get too high.

if you cant find a deal, then go for the 2011 socket, even at stock 1650v3 and 2667v2 will beat 1366 for gaming and rendering works so you can get away with pairing those chips with the chinese motherboards with good vrm heatsinks. go with 1650v3 if purely gaming, 2667v2 for a bit of future proofing. if you however get an overclocking board, change your cpu cooler to a bigger tower heatsink or an aio.

basically go with 1366 if you can overclock, it could match the stock clocks of 2011. but if you cant overclock 1366, go with 2011, better performer over all at stocks ang overclocked.

Thanks for your answers. I found P6X58D for 1366 socket. And I d buy huanan x99tf for 2011 socket. I mean I can buy both of them I dont have any problem about taking good motherboard. I just have decision problem. In this situation what should I do? I was planning to buy ryzen 7 3700x but ryzen systems doubles prices in these days especially with x570 motherboards. So If I use x5675 in 4.4 ghz it equals to 1650v3 s base clock performance, can we say this? Or It would beat x5675 in overclocked at 4.3,4.4 ghz? And what about chinese water coolers? If I buy any 240mm water cooling on aliexpress will I be ok in 1650v3 in 4.3 ghz? I have rx 580 sapphire se, I would use it a few months, after that I m planning to buy rtx 2060/2070super series. Will I have any bottleneck problem with 1650v3 in overclocked? If you have any idea I would be grateful If u had shared them with me.

@@fury6635 The x5675 overclocked will be on par with 1650v3, but can pull ahead on singlethread dependent games. But for the long run go with 1650v3, it has newer instruction sets and more features. You might want to consider buying the r7 2700, from what i see they are nearly the same price and you will be somewhat in the latest platform. I like air cooling more for its ease of use and no worries of leaks, but if you were to go with water cooling, go with a well known brand so that you can hold your overclocks at nice temps. 1650v3 @ 4,3ghz is fine and if your playing on 1440p or even 1080p pairing it with 2070 should be more than fine

msi x58 pro. ms7522

My games doesnt crash at all even when i play for a long time. try upping the voltage a bit, I have my voltages at 1.4v,

your chip might run at 4.3 at lower voltages than mine, but yeah, just try putting a bit more voltage, that usually does the trick for me