install wiring kit not available for these speakers anymore. these speakers pull 12+ amps, 2019 and later sprinters do not have a separate fuse for the horn. Hella advises a relay to run these speakers with heavier wiring direct to battery..
@edwinkrikhaar72232 ай бұрын
Found your channel today and watched everything. Too bad there are no more updates on the construction, it looked very interesting to follow!
@robhunter46394 ай бұрын
Perfect. Thank you!! Not quite as easy as you make it look, but very doable. 😊
@team_stoyo7 ай бұрын
Does the newer model (2019+) hinges work on a 2015 model sprinter?
@ZeezaAndNomadicJack8 ай бұрын
Just found your content. Very enjoyable. Looks like it has been a while since your last upload. Curious on how the Sprinter is coming along.. Did you wrap the roof sides? Looks sharp.
@inlarkhan46249 ай бұрын
Hello Blake I was so happy to see your video and find out you are Texan. I also live in Frisco City. In the process of converting to a Sprinter, I am having a hard time installing windows because it is not easy. Since the removed steel has been reattached and covered with scotch tape, it is extremely uneasy in Texas, where the vehicle loss rate is the highest. I dare to ask if you can help me.
@superbravoflamingo8669 ай бұрын
any one who has 270 for sale i need them for my cargo sprinter 2023
@raphaelliu687 ай бұрын
do you still need it? I am thinking to sell mine.
@seanvisintainer51705 ай бұрын
I have a set of 270 blue grey hinges I can sell if you still need them
@alexoliveira138210 ай бұрын
Hi folks, Could you please tell me where to buy the Sprinter horn bracket and plug and play harness? TY. Alex Oliveira.
@clearviewrestoration824110 ай бұрын
Hi good job those wheels are beautiful, what brand are they and where did you buy them?
@gnilre1970 Жыл бұрын
Thanks for this, link is broken: 404 ERROR - PAGE NOT FOUND
@johnwolf1475 Жыл бұрын
yo dude-- it is supposed to go on a blank space and kills the resonance as if u put your hand on a vibrating panel... just like if you grabbed your wifes vibrator-- you will be getting the vibes and she would be pissed. as nothing happening and no more sounds just yelling at how much of a bastard u are... what you did with kill mat was wrap her toy in butyl and it no longer works... but-- what you dont get - is one quarter inch stripo around teh head of that vibrator would have done the job and you wouldnt be in trouble
@MrRobbiefish Жыл бұрын
Where can I order the kit
@xiangchen2569 Жыл бұрын
Thank you for those details, very helpful ❤
@YuliyanYordanov-mo3fe Жыл бұрын
Good job ! Could you please tell me how long each of the three pieces is ? Thanks :)
@kirbyyork7669 Жыл бұрын
I guess you guys can repurpose that stock horn on your lawn tractor, ATV, or UTV once this kit has been installed in the Sprinter.
@greg.ocallaghan Жыл бұрын
i installed the terrawagen mondo kit, replacing the bottom part which makes it super easy. My van didn't come with mudguards so I ordered them from Mercedes, but they don't really fit after the terrawagen install. I thought perhaps it'd possible to run them with this VC kit, but you end up with half a mudguard? It looks a bit "off" with half the mudguard cut? Or it doesn't bother you that much in real life? (perhaps video makes it look weird). Thanks for the informative video!
@wdpk837 Жыл бұрын
Is there a stop stage at 180° already? I do moving and was thinking to get 270° hinges but not if it’s just 1 stage instead of 2 stage where they stop from flying all the way back
@greatcesarsghost Жыл бұрын
Do u know if hinges are made for older vans like 2000 GMC sevana
@andriylishylenko1084 Жыл бұрын
hello those that removed can sell
@rmease Жыл бұрын
Hello! When adding the top 180 hinge,and after bolting to the van, I am finding that holes on the door don’t line up easily with the hinge holes. Did you have to loosen the bottom hinge bolts to give some flex in order to be able to position the top and bolt it in?
@maderaoutdoorco.hammocksne2105 Жыл бұрын
Where did you buy your urethane Adhesive❓
@GoNSeetheWorld2 Жыл бұрын
Came to your channel with a search on OEM floor. Doing almost the exact same. Did you keep the wood spacing underneath the OEM floor or did you take them out?
@82192312 жыл бұрын
Do you need a power Relais?
@ScrewFlanders2 жыл бұрын
Thank you for the video, esp. for showing how to remove the grill. I'm always nervous pulling on clipped-in car parts (e.g., headlamp bezels) out of fear of breaking the part (e.g., headlamp bezels). That was a huge help.
@rb_advantures13922 жыл бұрын
Absolutely! I’d be lying if I said I didn’t practice before filming!😅 Glad we could help, and good luck with your build!
@bigdaddy78342 жыл бұрын
Where did you purchase the roof rail?
@rb_advantures13922 жыл бұрын
We purchased ours through Aluminess. The brand is Vantech.
@bigdaddy78342 жыл бұрын
@@rb_advantures1392 Thanks
@peterstefaniak43892 жыл бұрын
Thanks for the video…. Just installed our windows…. Your instructions are great.
@rb_advantures13922 жыл бұрын
Thanks for watching, and glad we could help! Good luck on the rest of your build.👍🏻
@carlczgz2 жыл бұрын
Awesome video! Great job.
@rb_advantures13922 жыл бұрын
Thanks for watching!
@footaj12 жыл бұрын
Awesome work, just to add on a bit of personal advice, be careful not to shower any adjacent paint or especially glass with hot metal shavings from the grinder, good idea to cover this all up. I learnt this mistake the hard way many years back when I used a grinder in my vehicle interior, ended up with hot metal specks melted into the glass windows..
@rb_advantures13922 жыл бұрын
Great advice! Thank you for watching!
@veggiepowered2 жыл бұрын
I'am Your Newest Subscriber Great Videos
@rb_advantures13922 жыл бұрын
Thank you for watching!
@anonymousdistrict10292 жыл бұрын
is the sound outside so bad to the point where your ears start to hurt? That's what I am looking for
@rb_advantures13922 жыл бұрын
Hahaha maybe you should look into train horns! These are pretty loud, but mostly just a needed upgrade over the oem baby horn.🎺
@anonymousdistrict10292 жыл бұрын
@@rb_advantures1392 I’ve ordered a retrofit Bosch classic horn from the 1970s, the decibels range from 110-128 depending on how loud you want them.
@hangyang16242 жыл бұрын
Yes thanks where can buy the windows?
@rb_advantures13922 жыл бұрын
Here are the links for them! Passenger- vanwindowsdirect.com/collections/sprinter-van-2019-2020-2021-2022/products/vwd-passenger-rear-cargo-door-internal-screen-slider-window-sprinter-van-19-21 Driver- vanwindowsdirect.com/collections/sprinter-van-2019-2020-2021-2022/products/vwd-driver-rear-cargo-door-internal-screen-slider-window-sprinter-van-19-21
@RedBatteryHead2 жыл бұрын
Kilmat doesn't need that much on a floor. Just put it on some areas that are "springy" like you did on side panels. Insulation wise I think you should have looked at some better info to solve that.
@rb_advantures13922 жыл бұрын
Thanks for watching, and thanks for the input. We researched many different configurations for the floor, and this was our favorite. The Kilmat made a HUGE difference in the road noise, and I would do it the same way again if I had to do it over. Sara and Alex James over at Custom Crafted Vans do it this way, and have been in the game for a long time. Good luck with your van build.
@RynohhFilms2 жыл бұрын
Would this work on a 2020? Looks like the horn is mounted in the right corner of the front instead of the middle. Would like to know before I pull the trigger and find out I have to find more pieces..
@rb_advantures13922 жыл бұрын
I should have mentioned, but my van is a 2020! So you are good to go.👍🏻
@RynohhFilms2 жыл бұрын
@@rb_advantures1392 thanks for the quickness. 👍👍
@RynohhFilms2 жыл бұрын
@@rb_advantures1392 Would you know if the mounting points for the horn bracket universal on all sprinters? I looked at the one we have after it returned from an out of state trip and our front end does not match your front end. I haven't gotten the front pieces off yet to look but, if the mount spots are the same I would like to order the horn and only remove the front pieces once.
@rb_advantures13922 жыл бұрын
@@RynohhFilms I don’t know for sure.🤔 I would just make sure whatever you order, says it’s compatible with your year model.
@orange132 жыл бұрын
great video, thank you for sharing. I wanted to point out that the upper bolt of the top hinge as well as the 2 of the bottom one (van side) require an E10 socket (a male TORX socket). a 5/16 or 8mm HEX does fit but is not the 100% correct tool. Given the cost of the hinges (and the price of the van), spending another $10 on a socket sounds reasonable :-)
@rb_advantures13922 жыл бұрын
Thanks for watching, and thanks for the input!
@nicktinsley10602 жыл бұрын
Very helpful thank you
@rb_advantures13922 жыл бұрын
Absolutely! Glad we could help.👍🏻
@nicktinsley10602 жыл бұрын
@@rb_advantures1392 Thanks I’m actually doing the opposite swapping out my 180s for 270s but the process should be hopefully the same
@lancecluster2 жыл бұрын
Nice job. Seems like a slightly different approach than some people are doing. This is the first time I have seen the existing sub floor in the van, most seem to start from bare metal. Will watch some more. Thanks,
@rb_advantures13922 жыл бұрын
Thanks for watching! And yes, we view the factory sub floor as being the perfect application. It was literally engineered for the van!lol and it’s a high grade plywood. Makes sense to us!
@jacksonhull70032 жыл бұрын
Hope you guys are doing well, 3 months since last video......
@rb_advantures13922 жыл бұрын
Thank you. Unfortunately life is very busy for us lately, and the van has been put on the back burner for a bit. We will be tackling it hard and fast as soon as we get a chance! Thanks for watching.
@jacksonhull70032 жыл бұрын
Van coming in next week. Doing some homework now. Your video really helped, thanks!
@rb_advantures13922 жыл бұрын
So glad it helped! Congrats on your van!
@accountingstepbystep22292 жыл бұрын
How come my Sprinter doesn't sound like that when I fire it up! And, peeling rubber! You must have a different engine option than what I have! Great video, RB!
@rb_advantures13922 жыл бұрын
Haha it’s a super secret option they don’t tell you about! Thanks for watching!
@TheAmulet92 жыл бұрын
I bought this kit but it doesn't fit my 2018 Sprinter unfortunately. Great video, looks like it will be super easy to install once I have a bracket that fits my model. I'll also be able to sell a bunch of these kits to the RV brand group on FB since everyone hates the Sprinter horn
@jimsab23352 жыл бұрын
Super helpful 👍
@rb_advantures13922 жыл бұрын
Glad we could help!
@alwaysaboutthejourney2 жыл бұрын
Thank you so much! Super helpful video. I was able to install my new horn in less time than it took to get the stupid grill off the van 😂 (definitely the hardest part). Thanks for your help!
@rb_advantures13922 жыл бұрын
Haha! I’m glad we could help! The grill is surprisingly difficult to remove the first time.lol Enjoy your new horns!🎺🎺
@hangyang16242 жыл бұрын
Hi can you tell me where can buy the rear window thanks!
@rb_advantures13922 жыл бұрын
Here is the link to one of them. The company is called Van Windows Direct.👍🏻 vanwindowsdirect.com/products/vwd-passenger-rear-cargo-door-slider-window-sprinter-van-19-21
@johncookson25462 жыл бұрын
265 or 275’s? They look great!
@rb_advantures13922 жыл бұрын
Thank you! They are 265/65/18
@seedickbuild2 жыл бұрын
Excellent work! Thank you for sharing this video, it will be helpful.
@rb_advantures13922 жыл бұрын
Absolutely! Glad we could help! Good luck.👍🏻
@David-sm5ne2 жыл бұрын
Congratulations. I'm so glad this channel is growing so well, great to see a channel get the recognition they deserve. Can't wait to see where this channel goes from here.
@ianhampton90332 жыл бұрын
I did the terrawagon fender kit. It was super easy with out cutting. I am not sure how big of a tire it will allow but I am running the 32.6” so I can keep adaptive cruise etc. Working. Great video quality and well thought out process. Thanks for creating content. I am subscribed!
@rb_advantures13922 жыл бұрын
Thanks for watching, and for the kind words! Part of me wishes I would have gone with the terrawagon kit.😅 I plan on running a 285. Unfortunately, my aftermarket lug bolts are stuck on a container ship, so I haven’t been able to install the new setup. Have a good one, and good luck with your build!
@lakai26992 жыл бұрын
Liked her video informative but you didn’t add the website or the information where to get the horn
@rb_advantures13922 жыл бұрын
Dang I totally forgot to add it in the description! Thank you for watching and thank you for pointing that out. I will add that.👍🏻
@johncookson25462 жыл бұрын
Great content! Can I ask where you got the mini cell foam and how much you needed for the build? I have the same size van. Thank you!
@rb_advantures13922 жыл бұрын
Thanks for watching! The foam we ordered is found here foamforyou.com/2lbs-minicell-foam And we ordered: Color-charcoal Sheet size- 60x72 Thickness-3/8 Hope this helps!
@David-sm5ne2 жыл бұрын
This is my favourite channel. I especially like it when you explain everything so nicely. I wish you a lot of success with the channel and happy life.
@rb_advantures13922 жыл бұрын
You are so kind! We are happy to help, and definitely appreciate the support!