It’s not just about the bushings or the tightening of the front end. It’s also about realigning the front drive axle left to right so the truck rides better and isn’t putting stress on the shocks or the springs. As you lift the truck with the stock track bar it moves or shifts the axle to the left. This is the main point of having the track bar. The other issues like the more heavy duty and stiff bar along with the better bushings is a plus.

How does one achieve that sound of the wastegate Ik you have to be EWG but how do you get that shuttering sound

I’ve never done my own brakes, I’m pretty handy - local garage wanted 380 for rear pads/disc - I can diy for 100 thinking of taking the plunge need a confidence boost

You gut that filter and get rid of the inside because it just clogs up from the oil residue and then you have to constantly buy new filters for $125/150 a pop when it’s not needed. Stopping the slop from going into the Turbo is only half of the job gutting that filter so your engine can breathe. Freely is the most important part.

My 04 5.9 threw a code for the intake heat malfunction.. if i do the delete will it get rid of that? Or will i have a check engine code all the time from it being deleted? Thanks

Nice work on the install. Looks good as well. Thuren and Carli are very similar in quality. I am installing the Carli 2.5 on my 5th Gen. and you helped answer some questions regarding quality of ride on this video.

My transmission is being built at Tommy Built Transmission in Inman SC

Same here. Im getting a local place here in sc in the upstate thats currently putting on a stage 1 650 hp transmission on my ram 2500. Should be getting it back before Thanksgiving. After my tune which i kept it on stock tune it still messed up my stock trans. 9250 dollars later i now will have a custom stage 1 transmission.

I have the owners manual, but it does not say the torque specs for that trans drain plug. Where can I find it?

Can find fittings like that locally at hardware store, brass pex adapter.

I'm getting like 20mpg. It should be at least 25mpg.

What year is that truck?

I got a 94 dodge ram running and driving how would you part it out ?

Still holding up? I have had nothing but bad experiences with aftermarket backup cameras. Work perfectly for a few months then crap out. This would be ideal setup too..

Can't make himself say catalytic converter

Beautiful 3rd gen

Comment and like the video ❤

How do the sides of the bottom cushion pull tight? The one thing I notice on cheaper brands don’t tuck in good and always pop out … that last view showed it pretty good they look tight and clean

Where did you get the led from ?

My 2016 Ford fusion hybrid with 338k just did that today P2112.i remember it did it back in 2016 when I had only 12k miles on it and the dealer fixed it for free because it was under the factory warranty.i order the part from advanced Auto and I'll be installing it in the morning, let's hope it fix the issue, by the way it's all nyc Uber miles.

I have crv2023 le , I try to change rear differential myself,but I don't see you reset light at Navigator,

Bad video

Which kit did you end up going with exactley? And did it include everything needed for the swap? I was looking at industrial injections kit but find it hard to justify dropping 3k on it

I followed along to your video the last time you changed the transmission fluid and it seemed to help a little bit. Once my vehicle heats up after about 10 or 15 minutes of driving it the transmission starts slipping and shifting hard. Do you know where I should go from here? Should I try Lucas Trans fix? I’m trying to avoid taking it to a mechanic.

“The game plan is… …. It can change” 😂😂😂 My Man

Ok I think the TDI wagon will be my next car. I currently own a 08 2.5 sedan and want to do a delete because they sound amazing. Im about to do a delete on my f350 6.7 egr is plugged up and its currently parked. My theory is these vehicles do horrible with this def crap you can't drive on country roads and don't go fast enough or get them warm enough. Which will result in destroying your vehicle. My nephew's EcoDiesel just had this problem with the EGR and mine which I've only owned for 6 months had done the same. So delete is the only option because they will just plug up again

Thank you for saving me money that I can spend on other mods.

Thank you! This was very helpful!!

Can you share what year srt 10. Can you share the part # piller

Where did you buy your fluid?

I did my testing with the full pipe now I have rough idle and a p2021 I do have a Rawtek stage2 egr/cooler - any suggestions?

My problem is that on my 2000 Impala (3.8 V6) the damn LOW OIL PRESSURE red light (and loud alarm) goes on every time I stop the vehicle, put it in park or start to slow down. Annoying AF! And it’s not even leaking! Is it likely just a failed switch? I bought the switch and I plan to replace it soon here…

Had nova's on my truck for 3 years now. It cost an extra £500 in UK taxes after ordering them. But it was so worth it. Only letdown is the main beam is not the best.

That 12 valve tune sound aggressive asfk

Why would you shift into over drive for

Bad ass expensive diesel rigs!!! Why cheap out in crap leveling kits, I don't get it man! Spend the money on a proper leveling kit or actual 2-3" quality lift.

Just ordered the 7 sotf tunes bundle with egt probe and can't wait. I had the juice with attitude with the cts3 on my 2nd gen and loved it but having an 06 now I hear nothing really beats the flexibility of the mm3.

What did you do with your intake air sensor?

I stumbled upon this video trying to figure out what’s leaking on my car, I noticed under your turbo is leaking like a siv, and I thought it was my EGR cooler but after seeing this it making me think my turbo is leaking is it common to leak there? What would be the repair? A new turbo? Or just replacing some lines?

Hello, can you tell me the name of the color of the truck?

Lafayette Union

YOUR TURBO WILL SPOOL FASTER.

Great job man

Hello. This is Cherry from Coverado. Are you interested in working with us to try our seat covers and help us make a video?

How often should spindles be greased

Do you have any discount links? want to change the headlights of my 16 f150

Got a 2019 ram 2500 that has a clunk when turning the steering wheel at a complete stop or when at low speeds like parking or pulling out. Had fiancé crank the wheel back and forth while I laid under it to see what was clunking. Seems like my stock track bar moved/flexed near the lower track bar bolt. Gunna replace it, also gunna throw a new dropped pitman arm on as well for my 5” lift. And also throw some bilstein’s 5100 stabilizer shocks.

Does this mod change your payload capacity? I mean, does it make the truck less stable when loaded with 2-3k lbs in the bed? Are you getting more body roll or any other adverse side effects?

Does it require a tune?