Пікірлер
@garyconrad6858 Күн бұрын
Where’s the back stop? It’s all open. Where’s the bullets going!!
@richardpatrono8185 12 күн бұрын
Those were awesome groups, red dot just needed adjustment for the further distance. Awesome guys!
@wisconsinarms9820 12 күн бұрын
Thank you!
@TheBanjoFlyBoy 21 күн бұрын
I’ve shot close to a thousand rounds of various ammo through my BG 2.0 without a single issue. Mags difficult to load the last rounds but have loosened up and are now fine. I guess I got lucky because my sights are 👍 right on. I rotate with my Sig p365 and holsters work for both👍👍
@wisconsinarms9820 20 күн бұрын
I think my sights are ok. Was probably too far away in this video. I took it to the indoor range last weekend and the sights seemed fine
@shanreg 28 күн бұрын
Are you using a piston with the Staccato? If not, that’s the cycling issue.
@wisconsinarms9820 27 күн бұрын
I’d have to ask them. It would appear not, otherwise I would think it would cycle at least some of the time
@shanreg 26 күн бұрын
@@wisconsinarms9820 I have a similar setup with the Rugged cage and piston and it cycles perfectly.
@joegilbert7661 Ай бұрын
Good review! How is the weight?
@wisconsinarms9820 29 күн бұрын
It’s got some heft, especially if you store a loaded mag in the stock. But it’s not the worst
@joegilbert7661 29 күн бұрын
@@wisconsinarms9820 Thanks.
@davidfcollis9638 Ай бұрын
What a waste of time, this is NOT a comparison review, it's Laurel & Hardy comedy. and it's BAD !
@wisconsinarms9820 Ай бұрын
Glad you liked it!
@hmdwn Ай бұрын
How do you like loading the 11th and especially the 12'th round (by hand) in the 12-round mag... good luck with that! Oh... and out of the box my sights are off... gun shoots hard left, even range masters confirmed it. At 15 yards point at 2:00/3:00 and you'll hit center.
@wisconsinarms9820 Ай бұрын
It’s not easy loading the last 2 rounds. I’m hoping the mag spring loosens up over time
@adrianmateogunz Ай бұрын
What’s up my friend. I am new to your channel and I am enjoying what I am seeing. Keep up the good work Sir. Thanks 🙏 for sharing. This is actually going to be my next gun added to my collection. You got yourself a new supporter here. I would appreciate support as well brother.!
@wisconsinarms9820 Ай бұрын
@@adrianmateogunz thank you for the support. A 2A supporter is a friend in my book. I subbed to your channel 😃
@adrianmateogunz Ай бұрын
@ Thank you 🙏 Sir. Much love and respect 🫡.
@MichaelJacksonProvenGuilty Ай бұрын
Great choice comparing 2 similarly priced, out-of-the-box, name brand contenders! ARs are selling like hotcakes after all the criminals that Joe and Kamala have encouraged to commit violent crime in the USA.
@wisconsinarms9820 Ай бұрын
Thank you 😃 I built my first one not long ago, a PSA for my first time doing it. Wanted to do a cheaper one before I get into better builds. The PSA is very similar to these as well, although I chose to go with a free float for something different
@MichaelJacksonProvenGuilty Ай бұрын
Kamala said on the news that she was going to walk into everyone's homes and take their guns. Thank God Trump won and is determined to protect our country. *STAY VIGILANT AND REMAIN PROFICIENT! Kamalas violent criminals and illegal aliens are everywhere these days.*
@davesfarmforestvideos8395 Ай бұрын
It is about time you tried out that one.
@wisconsinarms9820 Ай бұрын
@@davesfarmforestvideos8395 yes!
@hmdwn Ай бұрын
Kinda late in the Bodyguard 2.0 review game.
@MichaelJacksonProvenGuilty Ай бұрын
This is like watching Bevis and Butthead doing a review.
@wisconsinarms9820 Ай бұрын
We just needed to do their voice 😄
@bltefft Ай бұрын
Fun gun to shoot. I have several Henry’s and I shoot CB Longs and CB Shorts (and other subsonic 22’S) out of them. Today, I encountered a problem for the first time. Out my Golden Boy had I shot 30 rounds of CB Shorts, then loaded a tube of CB Longs. That was a mistake, if I known then, what I know now, I would have thoroughly cleaned GB first. Those CB Shorts, being short like they are, fouled up the chamber and the first CB Long I chambered, and shot, failed to extract because it had gotten jammed up in the chamber fouled by those CB Shorts. The problem was the fresh round in the tube, it got jammed up because of the one stuck in the chamber. I used some needle nose pliers to get at it, but only pulled the bullet out of the case. I finally had to field strip the GB to get the case out. I was successful and got it back together, cleaned the chamber good with a rod and brush, and bore snake, and it is again shooting great. Here’s what I learned - from now on, I’m gonna thoroughly clean a lever action rifle, before moving from CB Shorts to CB Longs.
@wisconsinarms9820 Ай бұрын
Yeah and the .22 ammo is just so dirty compared to the center fire stuff
@KTB3007 2 ай бұрын
Little d do lol!
@macmiller1678 2 ай бұрын
It’s the same gun.
@wisconsinarms9820 2 ай бұрын
Yeah basically. Mil-spec for the most part, with Ruger and Smith’s small little changes. A PSA gun would look almost the same too
@matthewkeith4363 2 ай бұрын
Thank you! Been looking all over for this exact video
@wisconsinarms9820 2 ай бұрын
Thanks for watching!
@mikeaal7111 3 ай бұрын
Lost me at "dildo", retards...
@shento256 4 ай бұрын
Thanks for posting this! This is the exact video I wanted to see. I have the same can and wondered the same question as you. Plus you shot both 22lr and 5.56 for sound comparison.
@wisconsinarms9820 4 ай бұрын
Glad you found some benefit, thanks for watching!
@woodystube1000 4 ай бұрын
This is a very solid option. It brakes down to be very compact and portable, but is still a solid shooter. Folks should not underestimate the energy and effectiveness of a 147 grain hollow point out of a carbine length barrel. To make it even better, you can use Glock mags. If you carry a Glock pistol, that’s a huge advantage. Great video!
@wisconsinarms9820 4 ай бұрын
Yes, great rifle to take with you to the range or camping in the woods.
@gfb46 4 ай бұрын
I liked your cat, bet he/she jumped on the table while filming, ha.
@wisconsinarms9820 4 ай бұрын
Yeah probably several times 😄
@Timpala44 4 ай бұрын
The thing that is keeping me from buying one is all of the extractor issues people have been having. Some people had the issue right away and some had it after several hundred rounds. Until I hear of Ruger fixing the issue from the factory, I’m not buying one. There are fixes that people have made. But, it should come from the factory with it in my opinion.
@wisconsinarms9820 4 ай бұрын
I agree, I haven’t heard this but I also haven’t gotten on groups or anything, that’s where you see or hear about more issues. I’m not sure if there are aftermarket extractors for it, but I’ll keep shooting mine and see how it holds up
@woodystube1000 4 ай бұрын
The Mcarbo replacement extractor is really inexpensive and solves the potential problem in a couple minutes. It’s unfortunate Ruger did not make a better extractor, but it’s not a deal breaker.
@bradkuether3561 Ай бұрын
Yes your point is valid. However it's not a crap shoot with the MCarbo upgrades. They work, and make the gun more reliable. I had lots off issues with the PC Carbine initially but then after the upgrades it runs like no one else' business. Don't throw the baby out with the bathwater.
@The_Wolf802 4 ай бұрын
If you put the glock mag adapter in, you can get a 10rnd mag in and break the gun down and it won’t hit the barrel when it stowed away. I’ve had this setup for a few years. Perfect truck gun accurate and reliable.
@wisconsinarms9820 4 ай бұрын
A 21 round will fit in the compartment stock. The Glock mag. I wanna say I have a 10 rd and it didn’t fit loaded into the chamber with the gun in break down mode. But I’ll have to double check
@Informationforwethepeople 5 ай бұрын
Anyone else notice after the misfire @ 1:30 mark the gun shoots 2 shots per trigger pull on the last 2 shot?
@deucedeuce1572 5 ай бұрын
I was wondering if it works on the 10/22 magazines. Several people said it don't work on the 10/22, but then I saw 10/22 magazine adapters for it. I'd assume that since they sell adapters that it Must work for the 10/22 ... but I've seen many gun companies and gun accessory companies sell things that don't work over the years.
@wisconsinarms9820 5 ай бұрын
They have an adapter for Ruger 10/22 aftermarket magazines only. Don’t work with original Ruger mags like the BX25. Which sucks cuz I have those
@deucedeuce1572 5 ай бұрын
@@wisconsinarms9820 Damn. They don't work with the rotary mags I assume? I assume they work with the higher capacity mags that have a spring and follower... but not the original 10rd magazines, because they're the rotary mags?
@wisconsinarms9820 4 ай бұрын
I believe that is correct
@justarepublicandog2505 5 ай бұрын
I’ll take the Ruger Monday- Sunday. Otherwise.. oh wait there’s no more days left.😂🤷🏻♂️
@Dpixtion 5 ай бұрын
How’s the feel? Is looks like it would break if dropped of a table…
@wisconsinarms9820 5 ай бұрын
It might, it’s just plastic and doesn’t feel like a composite type.
@tommccormick9290 6 ай бұрын
I bought mine in late 2017. So I'm kind of surprised you got a Ruger factory one that came with Magpul furniture.
@wisconsinarms9820 6 ай бұрын
Mine will probably stay mostly stock for awhile. Maybe optics in the future. I have the Glock mag well in it now
@wisconsinarms9820 6 ай бұрын
Plus it will be nice going to the range with it. It JUST fits in my range bag.
@josephlipnickas8148 5 ай бұрын
Ruger now offers them with the MAGPUL stock. I dumped the factory stock for an FDE ASAP. Greatly improves the rifles handling
@josephlipnickas8148 5 ай бұрын
I have the Romeo 5 with see through mount on mine. Otherwise looks just like yours. Of I have the Glock adapter in mine, smart move by Ruger. The earlier 9mm carbine they made, gun stores could not sell them because they only took Ruger mags.
@frankm8477 5 ай бұрын
Theres 3 generations. 1st gen looks like a rifle with standard rifle stock 2nd gen has the mlok rail all the way down and 3rd gen has that plus more features including the pistol grip. I believe
@crb7799 6 ай бұрын
I wonder if a magazine would fit in the handle
@wisconsinarms9820 6 ай бұрын
Yes, a magpul 21 round Glock mag fits in the stock compartment. If you mean the grip compartment, I’d have to try it. Would have to be really short if it does
@blogusvox 6 ай бұрын
Either that rifle isn't properly aligned or you're just a lousy shooter. 🤔
@wisconsinarms9820 6 ай бұрын
Haha, maybe both 😉. It wasn’t sighted in, was shooting high. Factory settings. Maybe it would have shot fine at a longer distance. I’ll adjust them to my liking
@stevenroth5424 6 ай бұрын
So dude takes a new gun tats never been properly setup /lubed and makes a video with it. 😮
@wisconsinarms9820 6 ай бұрын
Yep, just showing how it will work out of the box.
@frankm8477 5 ай бұрын
@wisconsinarms9820 always a good idea to remove factory lube and grease and add normal gun oil before shooting your rifle.
@alexugorcak9614 6 ай бұрын
Disconnected not broken
@jeffvail1452 6 ай бұрын
I didn’t like the comb stock on the golden boy and no way to mount a scope didn’t realize this until I had done purchased it had to put a cheek rest on it to compensate for the comb and I’m good with that but still no way to properly mount a scope if I had it to do over I would purchased the frontier model the comb is more like the marlin 30-30 and has a solid platform to mount a scope
@jn9500 5 ай бұрын
After a lot of research I bought my GoldenBoy Silver because it is drilled and tapped to accept a rail and be able to mount virtually any type of optic. I ordered a full length weaver style rail from Henry outfitters. You need to drift out the rear sight to expose the drilled and tapped mounting screw holes. Another few scope mounting options are available from Skinner Sights. Hope this helps you.
@rw717 6 ай бұрын
Great video! thank you.
@WillownDocH 7 ай бұрын
My Wife and I are still trying to figure out why Ruger DID make the safety actuation the opposite of many semi-autos....maybe because Ruger wanted a de-cocker and safety combined.
@wisconsinarms9820 7 ай бұрын
Not sure. The trigger being dead is odd too. I’d have to look at mine again, but I think there’s a bar that slides in front of the hammer when you have the hammer back and engage the safety. So it don’t go off. It can be seen when cleaning
@wisconsinarms9820 7 ай бұрын
It is a nice little gun though 😃. Fits my hand great. Plus I got the flat dark earth version
@ChargerusPrime 7 ай бұрын
Wish that could actually be that lyin bastitch Falsi youre plinkin at. Him and commie joe and all his other pedo commie cohorts.
@Skyerzen 7 ай бұрын
you two sounded like your mom is also your sister.....
@wisconsinarms9820 7 ай бұрын
Na, we are too far North for that sorta thing
@davidmitchell1920 5 ай бұрын
😂
@jpdaddy678 8 ай бұрын
Omg l literally just ordered those sandbag off Amazon lol
@wisconsinarms9820 8 ай бұрын
Nice!
@ke3552 8 ай бұрын
Any chance of doing a little research & rehearsal before starting the recording?
@wisconsinarms9820 8 ай бұрын
Na, that’s no fun
@Djru4real 8 ай бұрын
It is what it is😂 classical
@TheYTSucks 8 ай бұрын
I had this same scope mounted to a 10/22. No matter what I did, I could not get it on paper at 100 yards. I took the scope off and put a scope on that was specifically for .22LR. I'll put the Sonora on something a bit more caliber appropriate.
@projectjfk972 8 ай бұрын
Yall are stuck in 2019?
@wisconsinarms9820 7 ай бұрын
Why 2019?
@4deuce31 10 ай бұрын
Dude, learn your weapons.