Brilliant good Job will like to connect with MIR Valve and work on projects in Africa , we met in 2022 in ADIPEC abu dhabi
@samsulhuqkhanchoudhari607 Жыл бұрын
Hello
@wertiaaudit57462 жыл бұрын
😁👍
@nageshbaghel32393 жыл бұрын
Nice 👍🏻
@nageshbaghel32393 жыл бұрын
For Valve testing videos kzbin.info/www/bejne/qmauf4VqpqZ7oNE
@nageshbaghel32393 жыл бұрын
For valves inspection videos see on my channel, link here- kzbin.info/www/bejne/qmauf4VqpqZ7oNE
@nageshbaghel32393 жыл бұрын
Good
@nageshbaghel32393 жыл бұрын
Informative
@nageshbaghel32393 жыл бұрын
For valves inspection videos see on my channel, link here- kzbin.info/www/bejne/qmauf4VqpqZ7oNE
@nageshbaghel32393 жыл бұрын
For valves inspection videos see on my channel, link here- kzbin.info/www/bejne/qmauf4VqpqZ7oNE
@nageshbaghel32393 жыл бұрын
Nice
@azizurrahmanchaudhary13143 жыл бұрын
Kya sir Job mil Sakta hai
@azizurrahmanchaudhary13143 жыл бұрын
Job
@apet26423 жыл бұрын
AVV tcc italy
@romansyah40423 жыл бұрын
Akhirny update juga 👏
@mirvalve72493 жыл бұрын
Hello Roman, you can also follow us on our LinkedIn page for more regular updates www.linkedin.com/company/mir-valve-group/?viewAsMember=true
@riz.channel59984 жыл бұрын
Do you have a video made in aker for hyperbaric test in the last 2 years? If bot mistaken..as far as I remember under the supervision of mr zakaria. Last time bv also involve in the video making.
@mirvalve72494 жыл бұрын
Yes, correct but that video is not been published.
@riz.channel59984 жыл бұрын
MIR VALVE, I hope mirvalve can publish the video, because it has knowledge of hyperbaric valve testing. You all did a good job.👍
@mirvalve72494 жыл бұрын
Yes, we will, we have to edit it and finalise it. It was a swing check valve that we did hyperbaric testing
@ivsflowtester42894 жыл бұрын
great works!by the way,we www.ivsna.com make valve test system,such as pressure test,leak test, CV test,torque test.please check out [email protected]
@raghuramanks79644 жыл бұрын
Super vijay
@EJEuth4 жыл бұрын
Another nice and informative video from the MIR valves team. Nice to see (and hear) the inspection being made with 3D measurements, allowing not only linear measurements, but a much more comprehensive Metrologic tool. Regarding the solution implemented to test the hyperbaric features, I already used that while in Petrobras, specially for a larger valve that could not fit in the manufacturer’s hyperbaric chamber. This solution is also a reasonable alternative solution for shallow-water applications, where the forged body is already very robust (high stiffness) and practically would not deform due to external hydrostatic; so, testing sealing ports as closures and stem areas are the most prone to eventually fail and MIR presented this well. Thank you for sharing and congrats to MIR team.
@EJEuth4 жыл бұрын
This is an example of a nice project, integrating an adequate valve design for shallow-water Subsea applications with a modern way to provide solar powered autonomous electro-hydraulic power, control and telecommunication to the operator and end-user. The video also was very informative, being useful to viewers in general, but also providing to specialists and SMEs some hints of solutions chosen. After about 1 year of its conclusion, it would be nice to see a follow-up video with the lessons learnt and improvements eventually implemented. Congrats to the MIR Valves’ team and its CEO, Mr. Stasi Prandalos, for sharing this nice achievement!
@mirvalve72494 жыл бұрын
Mr. Euthymiou, we only saw your comments now! Thank you very much for your valuable input. Mr. Stasi Prandalos would like to get in touch with you, if you can share your email address or send him an email at [email protected]
@sutrissutris64975 жыл бұрын
BAGUS SEKALI
@brianwang6785 жыл бұрын
What kind of sealing type of this valve ? Is it fully metal seated?
@mirvalve72495 жыл бұрын
Hello Brian, it is a soft-seated valve, see min 0:25
@mirvalve72494 жыл бұрын
Hello Brian, it is soft-seated.
@alesl35215 жыл бұрын
Kudos to Mir Valve and its founder Mr Stasi Prandalos for the innovation driving customer service and support. Not common to see an ODM supplier pushing its boundary in interfacing with third party complex components and provide a full integrated system to their Clients.
@mirvalve72495 жыл бұрын
Thank you very much! Customer service and support is the largest differentiator today and it has been our main focus since Day 1.
@jaswinderahluwalia6 жыл бұрын
All credits for this companies stellar capabilities go to Mr Stasi. In my dealings with the Mir Valve as its legal counsel and with its CEO Mr Stasi I have found that the company has been built from bottom up on outstanding world class corporate principles and governance led by Mr Stasi himself.I believe this company has what it takes to reach great heights.
@mirvalve72495 жыл бұрын
Thank you very much!
@nageshbaghel32393 жыл бұрын
For valves inspection video Watch on given link- kzbin.info/www/bejne/qmauf4VqpqZ7oNE