Thank you for the information. It was very helpful. I used your way and now my bike is fixed and it’s not leaking any gas anymore. 🙌🏻

I ordered one, and never got it, I canceled the order after 50+ days of waiting

Genius idea

Thanks dude. That was very helpful.

Thx that was my issue ❤

Thanks for this video. Do you know if this will work on a DJI Remote Control 3

95% of the time you dont have to take this assembly apart! Just disconnect fuel line from check valve and change out the O-ring thats right there inside the housing, not on the check valve. This is the O-ring that gos bad and lets fuel drip out onto fuel line and down the bike! Pop out with a small pick. Leaving the check valve in the unit. I just did it on my 2017 ultra limited and it worked great. No more dripping fuel. Use safety glasses so you dont hit the button and spray fuel in your eyes!!! Also no need to disconnect battery pull fuel pump wire none of this. Its literally a 2-5 minute fix!!!

*Good bye tank dent.* And $1300 replacement tank from H-D.

It worked great thanks for the tip!!!!

Thanks, I just put a needle through the 3 holes from the outside. I had taken it apart awhile ago to change the batteries and discovered that the heads of the screws that hold the pad holders were almost totally stripped. Do you, by any chance, know the size and thread of those screw? I'm saving my next trip into the bottom for when I have new screws. Thanks.

Just saw you Amazon review of the kit, unless there's someone else that uses the same ziploc bag notation method. Lol. Thanks for the video, its real world helpful!

Thanks!

I also found that you have to squeeze towards the front of the battery/tool as that's where the hooks are located. It takes twice as much pressure if you squeeze the tab in the middle.

Your tip on the size of o-ring to use from the Auto Zone kit was a life saver. Thank you.

Same problem I will try this when I get home thanks

In addition to the grinding/filing down of the tabs, since I noticed there was a lot of binding as the batteries were inserted, I also sprayed a bunch of WD40 on the batteries themselves which seemed to help more that just grinding down the tabs (I used a dremmel for that). Note: If you grind/file down the tabs too much the battery may pop loose enough with vibration to lose the electrical connection inside - no big deal as you can easily shove it back in place - just something to be aware of. I totally agree that there is a signifcant design flaw here. Thanks much for the video.

Wow...can make for me

Did DJI ever fix this?

Mine just not working not drain I use tide pods

Great idea. Thank you.

How do you get the old one out?

Thank you for this! 🙏

What's the size required?

What is tiegone

Where you have the zio tie at....that part is moving on my truck and i can only turn so far. Whats that part called

Thank you for making this video. I have a 2017 Road King that's had a leaky fuel line for a long time. I went to AutoZone and bought the metric O-ring kit for $10 and replaced that lower one...now it doesn't leak! Harley really should sell these O-rings...I guess this is common.

Thank you so much sir 😊

That fixed it. Thank you!

So enjoyed this! You go beautiful ladies!

Why is this in my recommended. I do not even have a garbage disposal lol

Nice profile pic lol

Thanks for that, you're awesome especially for a female who has no one but me to rely on...God bless you sir

You’re a live saver

great video bro. I went to Harley today and they wanted $60 for another check valve. I am going to rebuild it like you did.

Hi, thanks for this video. One qq- no need to replace any parts but just cleaning the residue around would work just fine and stop the leak?

Thanks for sharing this; ima try it when I get the chance! The inability to invert my Y-axis was what’s prompting me to return the damn thing

Thank you! Finally a video for the coupe!!

Man this saved my ass thank you 🙏

Thank you, thank you, thank you❤

Awesome tip thanks

Great video thanks man helped me out a ton

I put dialectic grease on the inside rubber of my new Milwaukee multitool and it works like a charm coming off and on now. Was impossible for myself (female) to take off before that. A mechanic’s advice. I did not have this problem with my drill. If this doesn’t work I will try the filing suggestion. Thanks for the video.

Can a leaking fuel check valve make it to where there is not enough fuel pressure to start the bike?

Good idea, dealing with the same issue. Did it work?

Looks cool, does it hold good, no shifting or anything?

Very helpful, thanks! I just changed out the lower ring ,went to a john deere dealer,got o ring R 26286, fit perfect, and stopped the leak...(08 sportster)

Huge, HUGE thanks! After sitting 8 years, I brought out our SL-MC7 today and...... stuck on "checking discs." Ugh. Found this video and, yeup, my belt was stretched out. Went to Ace Hardware and got a #26 O-ring (1-3/16" O.D. x 1-1/16" I.D. x 1/16" thickness; stock number 35740B). The perfect amount of snugness and works like a charm! Thank you!!

Thanks so much for this hint....It has saved my hands!!

Thanks for the video! So silly that this switch isn't available on android.. I really hope they fix that. @dji

What are the 3 individual o ring sizes if not buying a kit (2014 HD street glide special