Thanks! I had a mini panic thinking I was stuck with my new ledger forever and would need to buy a new one. Crisis averted!
@giannimoranti946517 күн бұрын
Thanks for this tutorial, This still works with 24.7.4_1 !!
@vd453419 күн бұрын
Děkuji za návod. Nevím zda jsou komentáře aktivní, ale zkusím se zeptat. Hrozí při prasknutí rozvodového řemene za jízdy u motoru 3S-FE, že se potkají písty s ventily a nastane destrukce motoru? Děkuji za serózní odpověď. 👍🇨🇿
@DENZEN22020 күн бұрын
how do you set up that endplay when assembling. you use a washer?
@rent2ownnz19 күн бұрын
different sized thrust washers are available to achieve the correct end float range.
@playeruser-q3j22 күн бұрын
chur
@SonjaBrODNJAK24 күн бұрын
Thank you very much... With your explanation works excellent...You saved a lot of time... I am very grateful....
@rent2ownnz23 күн бұрын
Thanks. Yes it took me along time to figure it out myself. Back when I sorted this, there was not one solution. Glad this helps people :) hopes you liked and subbed to push it back up the list :)
@jameslee688128 күн бұрын
Been watching many of your videos do you have a link to the stealthburner display and and installation video to it I like that very much? NICE WORK!!
@rent2ownnz28 күн бұрын
Cheers for the feedback - hope you subbed and liked to get it out there. your question... Are you talking about the Knomi screen on the front of the Print head?
@jameslee688128 күн бұрын
Yes sir had no idea where to source it not what it was i just started printing my parts for my very first Voron 2.4rev D . I'm utilizing the galieo 2 extruder, titanium backers going with sensorless homing , beefy idlers looking forwardto hearing neck from you ,@rent2ownnz
@jameslee688128 күн бұрын
Also will be doing the Cartographer version for z and yes I liked and subscribed.
@goldilocks913Ай бұрын
Cheers dude, l periodically do it to remind myself of the process so I can tell other people how to do it but l forgot 😂
@amauryalighieri7801Ай бұрын
Thank you man! My ender has been doing this a lot lately and kept me worry.
@HaidarJM-j9gАй бұрын
I have the clutch problem but i,ve never thought about this white thing around the cable thank you so much you explained the solution for me thanks a bunch
@JL-dg8ymАй бұрын
The best and simplest instruction - thank you thank you😊
@pedrosura2 ай бұрын
Any ideas why I do not se the "Tobii Enabled" button below the DCS WORLD. I selected the game in the binmt folder but it just doesn't show. In game it doesnt work. My overlay correctly tracks my eyes.
The best example of how to measure preload. You sir are a God sent.
@ataleofgames55552 ай бұрын
Any setting for the latest gamehub?
@rent2ownnz2 ай бұрын
nope
@daldach10112 ай бұрын
Thank you man, saved me from having to try to copy it manually setting by setting
@stevejones42542 ай бұрын
I'm getting the light flash for 1 button but it's not connecting to door🤔 Ant thoughts anyone?
@rent2ownnz2 ай бұрын
If you read the instructions in the description, you will get your answer :)
@stevejones42542 ай бұрын
@@rent2ownnz it's not pairing with the door
@InYourDreams-Andia2 ай бұрын
Worked! Tnx. Just got my hands on one 🤟🥂
@Wolfhound2232 ай бұрын
NOPE SO OUT OF DATE NOW sorry caps, lost LOST I TELL YOU.
@davidbuderim23952 ай бұрын
Nice - thanks
@subaie0082 ай бұрын
Thanks
@Purp_n_Turq2 ай бұрын
1-2-3-4... (proceeds to do a 5th and sometimes a 6th)
@jotamad56052 ай бұрын
Thanks man!
@writerrhino1663 ай бұрын
That was super helpful, thank you!! Haha, Arma 3 tricks people into THINKING they can fly helicopters. DCS Huey and UH-60 humbled me real quick.
@eliasandersson81323 ай бұрын
Idk if you will see this comment but if you do, i would appriciate help. The problem I have is that the Track IR column isnt showing in the DCS otions.
@rent2ownnz3 ай бұрын
dont do Track IR sorry
@eliasandersson81323 ай бұрын
@@rent2ownnz allright man thank you for reply
@ParZIVal19D3 ай бұрын
Really needing some help with this
@brin573 ай бұрын
Thanks Westy. Helped a lot. Can you tell me what does the setting that you set to 1.9 do ? as opposed to it being 1.0
@rent2ownnz3 ай бұрын
Hi Brian, Thanks . It improves the stability of the 2 cyclic directions.
@gazman59803 ай бұрын
Brilliant thank you
@ke784873 ай бұрын
Everybody's using that stupid song for the intro
@willielemaitre38544 ай бұрын
Thank you kindly, very enlightning! I am ordering the Trident, and can not find a single unboxing of the MPX Trident. Might have to make one...lol
@patrycjaradecka9504 ай бұрын
Hi, not sure if someone has the same issue. I have the same garage fob, but a few weeks after programming it's not working and I have to do the programming again. I even bought two and they both lost programming at the same time. Does anyone know what could be the reason?
@gtarson4 ай бұрын
Could you use this Guide to flash the EBB SB2209 RP2040 CAN board?
@rent2ownnz4 ай бұрын
This one is for the 2209 studio.kzbin.info-PluLE11J1Q
@cosmicstuff444 ай бұрын
This is likely my problem, my 3000 is a couple years old but has hardly been used! This video is helpful, and yah, looks like several others finding the same problem as well. I think this is what my issue is because I can bang on the side of it and it intermittently starts working with each bang, so this wire being busted would explain that.
@cosmicstuff444 ай бұрын
I tore it down and as it turned out this wasn't the issue! It was a problem where the lug/spade type connectors mate the switch body to the stator housing and also make electrical connection there. These are not good connectors and tend to arc while in operation and after awhile get pitting and corrosion causing the connection to get too loose to make proper contact. One of the four on mine was really bad. I had to take a micro sized jewelers screwdriver and bend one-half of the connecter receptacle on the stator housing to make for a tighter fit when the pin was inserted. I also used a bit of contact cleaner. Works now, but this will likely re-occur at some point so I'm thinking about possible longer term solutions in the meantime.
@gtarson4 ай бұрын
Thanks so much for this content, and your cheat sheet. I have never put a 3dprinter together but decided to take on the Voron 2.4r2 with TAP, CB1,CAN and Rapido Hotend 2.LOL! Wish me luck! I did have issues following along when it got to getting the ebb 2209 into dfu mode. I had the manta m8p and ebb plugged into separate 5v sources, jumpers in place, but I could not get it into dfu mode. Finally I plugged the ebb into the usb port on the M8P , held the boot button in, press and released the reset button, ran the lsusb command and it worked. The only other thing i'm having issues with is getting the CB1 on wifi. I flashed both boards via ethernet. Thanks again for the info and all you do.
@rent2ownnz4 ай бұрын
Thanks dude... appreciate the feedback. I have not touched mine for a while now, but still designing parts on Fusion 306
@sex123451054 ай бұрын
Fair play thanks
@juandorta-duque60284 ай бұрын
Man, thanks for your effort but I can't hear a thing with the music and the Nano screen is super blurry so I can't tell what you are doing
@oscarvogel21404 ай бұрын
Thanks, big help. Once I change the ratio to 50:1 it came out perfect with the stock value.
@Krautech4 ай бұрын
Did you change your mount for the canbus to toolhead again? looks different. i used the G2E umbilical mount like you did in part 2 but i found i had to loop the cable over to get it in lol, here it looks like youve changed it?
@rent2ownnz4 ай бұрын
Are you meaning the Galileo 2 mount? or the one shown in this video? I changed the complete head over to G2 and made split system wiring loom ... but just after I had completed that, I found that there was a retainer that worked without any modification at all to my wiring. I call it learning to grow :)
@Krautech4 ай бұрын
@@rent2ownnz oh yeah for the G2 👍 what retainer was it if you don't mind me asking? Your videos have been so helpful
@captkaos96384 ай бұрын
Awesome mate, great to know.
@Krautech5 ай бұрын
Seriously thank you for all these videos, appreciate the time and effort it takes you!
@rent2ownnz5 ай бұрын
Thanks my man! Appreciate the shout out!
@Krautech5 ай бұрын
Thanks for this series! I'm about to build my first voron 2.4 with the MPX kit 😅 wish me luck
@rent2ownnz5 ай бұрын
Awesome mate! I am sure you will enjoy the learning curve. I made a few mistakes as you will see in the series, but all in all ... I am absolutely stoked with mine. oh ... and ou are welcome. Thanks for the like and sub!
@Krautech5 ай бұрын
@@rent2ownnz any extra "post" video advice? Being able to follow this in real time is going to be so helpful. I even went and bought the same-ish Allen key screwdrivers 🤣
@declanjoyce86405 ай бұрын
Yep...this works, just ended 6 months of faffing about with other remotes...(but there again I am a slow learner!)
@rent2ownnz5 ай бұрын
Lol, life is about learning. pay it forward :) Glad it worked for you
@test-kz2iq5 ай бұрын
Too much music and it is too loud
@leannefreeman30905 ай бұрын
Thanks Westy , this info is really helpful .you the man !
@rent2ownnz5 ай бұрын
Cheers Bud!
@myassistants48405 ай бұрын
Could it be overheating? What are your current setting for hold and run?
@rent2ownnz5 ай бұрын
nope
@michaelmerrell85405 ай бұрын
I'm going through this step right now. With the M8P mounted it is not obvious, but the other (board-facing) side of the mount has countersunk holes. So prior to mounting the M8P to the mount, I'm screwing from the board side into the holes in the DIN clips, and the screws fit neatly into the countersinks. No drilling required. Still trying to divine which direction the clips should be oriented. Neither direction seems to center the M8P on the DIN rail. That probably means it doesn't matter, but symmetry.
@rent2ownnz5 ай бұрын
yeah I think I mucked this bit up a little. pretty sure the M8P mounts offset
@michaelmerrell85405 ай бұрын
@@rent2ownnz I'm pretty sure we've all assembled things upside-down or backwards, had to take things apart to fix a step we missed, etc. Hell, no project is complete for me until I've somehow drawn blood. Having this series to reference has saved me hours of figuring out what something should look like, confirming my interpretation of the manual, etc. That's no small thing. So take any of my comments as efforts to add to the effort.
@timopekkanen5 ай бұрын
What most probably happens here is that your stability controls are active and you are actively figting the FPS system. Try to hold the force trim button or disengage the FPS in the pedestal controls. You will find that you have very sensitive controls without this modification.
@timopekkanen5 ай бұрын
AAAnd just like that, I stand corrected. FPS off is also a lot easier to control with the curves you have suggested. This seems to apply at least to spring loaded HOTAS like the X52 that I have. I also would like to thank you for making me test this! Now I seem to have a lot more control over this bird.
@seanwilkinson99485 ай бұрын
Unable to get mine to work :(
@rent2ownnz5 ай бұрын
ya might need to contact the manufacturer
@Ginuwine-kx2iv5 ай бұрын
Hey what about head tracking in DCS keybind axis controls? Are they setup or disabled or default?