This is only for the bench job. You can also program it using the ECU connection under the dash

❤❤ great job

i wander ,how it is connected j2534 box to ? via bluetooth?

Phone number please

Is there are any program need to be installed after finish change all airbag to clear the airbag error light on panel meter?

아......정말 많은걸배워갑니다 키 번호1,2만 리모콘이 작동이되나봅니다 그것도모르고 3~17번까지 쓰고지우고쓰고지우고 왜안되나...왜안되나...궁금했던게 싹 해결되었습니다

WOW so much effort to just program a new key. Does BMW use the same procedure too?

У меня тоже самое, и висят обновления и не обновляется, Как вы решили этую проблему?

Thanks god you didnt burn board 🤦

How to fix bmw keep that’s programmed but don’t sync

where are programming instructions !?

Nice video, nice car.

wow..Denny.. your playing with fire my man. I took some BMW classes and learned alot- I see a lot of mistakes here I made before taking them classes and you coulda bricked and corrupted that eeprom the way your doing it.

if a working key is present, can a used one off of ebay be bought and programmed to have as a spare, or does it have to be 'virgin'? thx

I mean is good but why not explaining the process and what every tool is called and what it does? This video would had made a great tutorial if all had been explained!

It hurt watching this video I kept yelling hit yes to preprocess the key while in the ignition he would of been done a long time ago if he would of just hit yes instead of no very hard to watch this video be careful with people who makes key just because they have the tools doesn’t mean they know anything about keys and how they work this videos clearly shows that but happy he figured it out lol kinda of

Your kinda doing everything backwards. You should have took the box apart first. You should have disconnected power to xp400 after u was done reading chip. You should never be pluging in the 2 connectors while its reading chip because as seen it disconnected. Your lucky nothing was damaged. Also jbox should be hardwire to autel. Also using 3rd key spot could cause issue if someone was to get 3rd key made by dealer in future. Probably should have picked 5 atleast

I tried it / worked easily thank you

Hi can we not program spare key on da car?

Hold the newly programmed key to the coil for 10 seconds while holding the ignition button the tools keeps telling u to do that after u program key but u don’t once u do that keyless and everything will start working

How do you connect things with an autel im508?Which doesn't have the j2534?are you using the j2534 here??

Very important to disconnect the black terminal on the battery of the car before doing all this job 😊

My friend I have noticed you use a different PCB key The customer’s original key was PCB7953p and you programmed PCB7945p (According to the reading in the Xhorse) Did you have any problems because of the different PCB key? It usually get programmed

Спасибо, больше мучений снимать все на видео не теряя кадр и при этом еще и работать.

한국분이시네요 ㅋ 저도 608사용합니다

really hard work good job

Waaaau that was something else ,,, amaysim job soo sooo good

So original has 7953P with 433Mhz and you had learnd first 7945P with 433Mhz but remote dont work. The second learnd key was 7953P which should be used on 433Mhz. Last time i also made a key 7954P but with 868Mhz and remote was ok. If i get a car with 433Mhz i will use 7953P key only and not 7945P.

Impressive, thx for sharing

when you disconect the module do you sleep the car?

In Cas module you can see the key cutting code but where do you get the code in FEM/Cas 4+?

Denny, can i use it??Any comment what or where did this happen?...v

Why you stop sir. Keep uploading videos. Thanks for your help 😊

Very very BAD PRODUCT AND NO SUPPORT ! CHINEASE GARBADGED ! HARDWARE PROBLEM AND SOFTWARE !

Can I use this video on my channel?

최고 입니다 저도 608있는데 사용을 잘못해요 영상 많이 찍어주세요

what year?

Top, show 🎉

What software is that?

I am using aitel Im 508 I need to add Toyota crown athlete 2004 key but it is not in the list. I used to program toyota smart key maker, the car is ready to start but the remote does not work, what should I do to succeed

How come the gbox 2 was used? Iv seen some do it without it? Does it speed up the process?

phewwwww

Does it have to be a brand new key ????

Hi can you do this with the IM508 please. Thanks

So first Key was bad?

처음부터 끝까지 잘 봤습니다. 덕분에 공부 많이 되었습니다. 감사합니다^^

잘보고갑니다 수고많으셨습니다

Nice video. I added the same key but after a few hours the remote stopped working. Car still starts but no remote function. You ever run into that issue?

good evening, Can you help me with the diagram to connect the red cable to the FEM platform ... thanks

🙄