Pretty good video; very helpful hopefully I can get the ac blower to come on without jumping it off to come on… Do you have any videos with ground problems ?
@SlicpartnaКүн бұрын
@@Obs_sergeallday Unfortunately I dont have any content on ground issues What problem do you have with the blower motor?
@Obs_sergealldayКүн бұрын
@@Slicpartna thanks I can’t get the windshield wiper to come on, radio and the ac is out.. I would have to hit a bump for them to pop on… good Mechanic are in short supply in New Orleans 🤦🏽♀️
@SlicpartnaКүн бұрын
@@Obs_sergealldayoh wow that isnt good!! You might have checked this already but you can check the ground from the battery to the engine block and to the body Make sure the bolts are tight
@Obs_sergealldayКүн бұрын
@@Slicpartna Will be checking it in the AM. Thanks
@tdb0ne111 күн бұрын
excellent video but have a question. i have a 09 2500hd quad cab 4x4. to my understanding the electrical connector that plugs into my abs module (looks like yours) also sends signals to turn off and on the fuel pump. did you run into this problem when removing the abs module and if so what did you do to fix it? thanks one more thing i dont have a brake power booster i have hydraboost.
@Slicpartna11 күн бұрын
I didn't have any issues with the fuel pump. Everything should should work the same with the hydraboost Let me know if you have any other questions Thanks for watching
@MysteryKmt16 күн бұрын
Just came across a 99 suburban. Figured why not? Your videos are helping me find direction on this build bro thank you 🙏🏽
@Slicpartna16 күн бұрын
Let me know if you have any questions Thanks for watching
@MikeSanders-oo1oz17 күн бұрын
Thank you very much! I have cleaned mine out with a garden hose before but I am definitely going to use the foam spray asap I need all the air I can get mine not cutting it.
@Slicpartna17 күн бұрын
Let me know if you have any questions Thanks for watching
@treysberta17 күн бұрын
Sir... this is by far the best video
@Slicpartna17 күн бұрын
Thanks for the compliment Let me know if you have any questions Thanks for watching
@187omg18 күн бұрын
An absolute legend. Thank you. 🙏
@Slicpartna18 күн бұрын
Let me know if you have any questions Thanks for watching
@jamesm56822 күн бұрын
If the brakes are hard when the truck is not running and then spongy when the truck is running it's usually the hydraulic valves in the ABS.
@Thewordaround.Ай бұрын
I believe I have that issue too thank you.
@SlicpartnaАй бұрын
Let me know if you have any questions Thanks for watching
@CCRIDER-wq4hmАй бұрын
Nice work bro. I had this video on my watch later list. I have my Elco completely primed with high build. I just need to get down on some blocking. Your video got me inspired to start working again. Thank you bro. Stay up✊
@SlicpartnaАй бұрын
I suggest breaking the block sanding down into micro tasks, just do a little at a time You will eventually get it completed and ready for the next step Thanks for watching
@JamesTheRealSpeaker3.0_Ай бұрын
Good job bro. I also prefer wetsanding my guide coat with 400 grit. I find dry sanding too scratchy and I burn through much more easily.
@SlicpartnaАй бұрын
going forward i will only wet sand, when i dry sanded the hood, I burned through. i re-sprayed primer on the hood, wet sanded, this time it was a different outcome I'm sold on wet sanding thanks for watching
@user-ny2iz9qo5rАй бұрын
How many remote vehicle buttons can be wired up?
@SlicpartnaАй бұрын
You can have as many remote buttons as you want Let me know if you have any other questions Thanks for watching
@wyattoneableАй бұрын
I like wet sanding as well. It makes the sand paper last longer. I have a black GMC Yukon and want to paint it at home. I agree with your idea of painting a section at a time. These are big SUV's and without a paint booth I think it's smart to break it down.
@SlicpartnaАй бұрын
I favor wet sanding over dry sanding. I can deal with the water more than the dust. Thanks for watching
@rongamble9884Ай бұрын
Not trying to be rude here but 21 first century man no one wet sands anyone I dry sand every thing
@SlicpartnaАй бұрын
Hey doc no offense taken, Like I said dry sanding create too much dust for me. Thanks for watching
@SnakeyD8468Ай бұрын
DC's chop shop! 😂😂😂
@TheRealEmTownАй бұрын
Where'd you go for your drilled/slotted rotors
@SlicpartnaАй бұрын
I got the rotors from summit racing Let me know if you have any other questions Thanks for watching
@josecfish5297Ай бұрын
What about that annoying ABS light how do you get that to come off after the final assembly??
@SlicpartnaАй бұрын
I removed the bulb for the abs in the instrument cluster Let me know if you have any other questions
@georgiabigfootАй бұрын
I appreciate you for making this detailed vid. Just got my 96 burb blower motor out and I’m stunned how clogged my cooling fins are. When you are rinsing with water is there any danger of the crud getting stuck in the other side of those aluminum fins ? Or does it drain on the other side too ? Going to depot tomorrow to get the foaming cleaner. Thank you , just subbed Also what brand blower did you buy ?
@SlicpartnaАй бұрын
Use a tooth brush to dislodge the crud, remove the debris as best as you can. I ordered the blower motor from rockauto I cant recall the brand. Let me know if you have any other questions Thanks for watching
@georgiabigfootАй бұрын
@@Slicpartnamany thanks , I found it on rockauto, it’s a four seasons. Appears some Autozone’s carry it too. Blessings
@danieldriscol4484Ай бұрын
Howdy there, great video What do u think would be my issue would be if I smell ac refrigeration on inside of my 97 k1500, ac freon doesn't stay in overnite even
@SlicpartnaАй бұрын
@@danieldriscol4484 If you smell refrigerant inside the passenger area, then you might have something going on with the evaporator. I would suggest doing a leak search. You can add dye to the system or use refrigerant that has dye in it. To confirm if is the evaporator you will see the dye leak out of the condensate drain tube with the condensation. You will need a light that will pick up the UV Dye Do this at night, you will see the dye better Good luck Thanks for watching
@donoberlohАй бұрын
Ive always just Poured ground pepper and it even seals larger cracks
@SlicpartnaАй бұрын
Interesting idea, I will have to keep that in mind Thanks for watching
@samwellfodenАй бұрын
Wish I had more friends like you. Can’t wait to see how this turns out
@SlicpartnaАй бұрын
I'm anxious to see the this finished I will be starting a new project LS swapping an Ole skool caddy
@samwellfodenАй бұрын
@@Slicpartna can’t wait to see how it goes 👌
@jasolheАй бұрын
Crap i swapped my blower motor one screw suuuucked but i left it out haha. Pissed i missed the opportunity to do this cleaning when it was right There!! Its on my list now the low vents blow hard air but top vents are weak...hasnt been cleaned in 27 years i guarantee
@SlicpartnaАй бұрын
Wow 27 years! I'm sure there is all kinds of debris in there blocking the air flow. Let me know if you have any questions Thanks for watching
@sst9364Ай бұрын
Loved the 383 build that I need to rewatch but now paint nice loving your content. Stay Real!! Thanks again
@SlicpartnaАй бұрын
Thanks for the compliment and thanks for watching Let me know if you have any questions about this build
@victorthecarguy3126Ай бұрын
That's one smooth looking Suburban, I've never seen anyone shave the door handles and tail lights. Maybe do the jams ahead of time. Having it all closed when you do the outside should make it easier to get the same finish on the doors and fenders.
@SlicpartnaАй бұрын
Thanks for the compliment I plan to paint the door jambs and the roof at that same time. Stay tuned in, Thanks for watching.
@r.e.krealestate232 ай бұрын
Nice bro keep pushing
@Slicpartna2 ай бұрын
Thanks for the encouragement Thanks for watching
@SosaDiesel922 ай бұрын
What is that tapping noise when you have your A/C on ? My truck is making the same noise just trying to figure out what it is .
@Slicpartna2 ай бұрын
If I remember correctly, I think that sound was coming from the belt tensioner Let me know if you have any other questions
@jodywade56172 ай бұрын
Well done Sir
@Slicpartna2 ай бұрын
Thanks for watching
@frederickdean24852 ай бұрын
What size crank he’s using???
@Slicpartna2 ай бұрын
It is 4" stroke crankshaft Let me know if you have any other questions Thanks for watching
@treygreen13832 ай бұрын
Question do you have dual batteries and if so how did you hook them up ?
@Slicpartna2 ай бұрын
Negative, I dont have dual batteries
@treygreen13832 ай бұрын
Okay thank you so much for replying.
@Intensotejanito2 ай бұрын
Thanks for this video sr !!!! This video help me a lot in my truck …gracias amigo 💪🏻💪🏻💪🏻💪🏻🔥🔥🔥👍‼️
@Slicpartna2 ай бұрын
Let me know if you have any questions Thanks for watching
@gbpgbp99922 ай бұрын
Added a dye to my coolant to find my leak but this would be quicker method for-sure
@Slicpartna2 ай бұрын
yep yep, it doesn't take much time for the leak to reveal itself let me know if you have any future questions thanks for watching
@SomeGuyInSandy2 ай бұрын
Nice! I have the same issue. 2004, 5.3, drip drip drip! I've been smelling coolant for a while now. The leak finally got heavy enough for it to drip past the skid plate and onto the driveway. Fun!
@Slicpartna2 ай бұрын
Let me know if you have any questions Thanks for watching
@SomeGuyInSandy2 ай бұрын
@@Slicpartna I ended up replacing the water pump today. Pretty easy really, except for the coolant mess. Whoever it was at GM that made the decision to block off the radiator petcock is a grade-A idiot, lol. I ended up putting two and a half gallons of coolant into it when I was done, and after bringing it up to operating temperature, it doesn't show any signs of leaking! Fingers crossed.
@Slicpartna2 ай бұрын
@@SomeGuyInSandy hopefully that solved the problem. Let me know if you have any future questions
@brianrandle83352 ай бұрын
What oil pump did you use ?
@Slicpartna2 ай бұрын
I used the melling high-volume oil pump Let me know if you have any questions Thanks for watching
@user-qe5sd3zf3e3 ай бұрын
Hooooooraaleeee.. VATO🤟🫡. I HAVE GT YUKON AND I ALWAYS WANTED TO PUT DISCK BREAK..HORA LE VATO COOL VIDEO 😊
@Slicpartna3 ай бұрын
thanks for watching let me know if you have any questions
@edwardboyer71023 ай бұрын
Bruh hit me back i just need ah truck engine recipe
@travisowensby11023 ай бұрын
Great video Thanks for sharing
@Slicpartna3 ай бұрын
Thanks for watching Let me know if you have any questions
@Rook8143 ай бұрын
I have questions my Yukon Denali xl gmc leeking ain't freeze
@Slicpartna3 ай бұрын
Whatz up doc
@Rook8143 ай бұрын
@@Slicpartna my Yukon Denali XL GMC leaking antifreeze under the car but car not smoking or overheating
@Slicpartna3 ай бұрын
@@Rook814 I would recommend pressuring the system to Identify where the leak is coming from It could be a hose, the water pump, the radiator etc. Let me know if you have any other questions Let me know
@Rook8143 ай бұрын
@@Slicpartna I will thank you your video help me
@Rook8143 ай бұрын
Another question how would you know if it's the water pump I think it's a bad whose wen you pour it in the line goes down rite away but the antifreeze comes out in seconds but still don't over heat no smoking
@Yg556483 ай бұрын
What brand c notch is on your truck?
@Slicpartna3 ай бұрын
If I remember correctly, the c-notch is from ride tech Let me know if you have any other questions Thanks for watching
@scottchissus83643 ай бұрын
Exactly what I needed to know. Great visuals. Best video I have seen for this job. Much obliged my friend.
@Slicpartna3 ай бұрын
Let me know if you have any questions Thanks for watching
@nicholas79304 ай бұрын
Lookin good!! used your video on how to measure for my pushrods. Thank you for your videos!!
@Slicpartna4 ай бұрын
Yes sir Let me know if you have any questions Thanks for watching
@francescocosentini92644 ай бұрын
I'm close to doing this as well .. seen a video to get the ABS thingy to work was by driving the truck fast then slam on the brakes ,to reactivate the abs ,.then bleed the brakes ,.. Thank you for your video God bless
@Slicpartna4 ай бұрын
Let me know if you have any questions Thanks for watching
@francescocosentini92644 ай бұрын
@@Slicpartna I will ,thanks will keep you posted. Blessings
@markkiser93294 ай бұрын
YOU MIGHT HAVE TAKEN AN AFTER CLEANING PICTURE ?
@markkiser93294 ай бұрын
OIL THE BEARINGS. IT WORKS
@kendallsprolls68444 ай бұрын
Hey how's it going? Quick question, what set up did you use for your suspension because I plan on doing the same for my 1995 suburban?
@Slicpartna4 ай бұрын
I have a 4 way air suspension 4 link in the rear with pan-hard bar Let me know if you have any other questions Thanks for watching
@timothyking32014 ай бұрын
Coming out the weep hole??
@Slicpartna4 ай бұрын
Na, it was the gasket that failed Let me know if you have any other questions Thanks for watching
@larrymelroy56874 ай бұрын
Did the emergency brake line match up What's what they gave you in the kit or was there any mods you had to do?
@Slicpartna4 ай бұрын
I had to use a longer emergency brake cable, if I remember correctly i use one from 3500 that I picked up from rockauto Let me know if you have any other questions Thanks for watching
@Chevro914 ай бұрын
Sik ride 👍🏻 I have a 99 Burn gettin some things done Do you got an IG Page
@Slicpartna4 ай бұрын
Thanks for the compliment Na no IG page Let me know if you have any questions Thanks for watching
@itcomesinwavves4 ай бұрын
How is it holding up, sir? I'm looking to buy this kit pretty soon here
@Slicpartna4 ай бұрын
It is holding up fine with no issues, I wish I would have done it sooner! Let me know if you have any questions Thanks for watching
@kmnremtp5 ай бұрын
It doesn’t cause problems spraying water up in there like that?!
@Slicpartna5 ай бұрын
Na, Remember the evaporator drips condensation in the air box You dont have to use as much water, the cleaner is a no rinse formula It will wash off as the a/c system is in use. Let me know if you have any other questions Thanks for watching
@kmnremtp5 ай бұрын
@@Slicpartna thanks for the quick response. I blew mine out with air earlier… I think water would’ve been better. I swear my box was half full of debris!
@Slicpartna5 ай бұрын
@@kmnremtp yea the air box will collect debris, the cowl cover doesnt do a good job of keeping that jazz out. I have to clean mine out again. Floating leaves, pine needles and such continues to collected in the air box. Thanks for watching Let me know if you have any other questions
@jabarimorgan58405 ай бұрын
Can i get a complete build sheet?
@Slicpartna5 ай бұрын
LS 383 Parts List Part# MFG Retailer Price AAF-ALL90068 Allstar Performance Oil Galley Plugs Summit Racing $21.99 ARP-134-1101 ARP Chromoly Header Bolt Kits Summit Racing $29.99 ARP-234-5608 ARP Main Stud Kits Summit Racing $229.99 FEL-MS92467 Fel-Pro Exhaust Manifold Gaskets Summit Racing $10.99 MEL-M29517 Melling Oil Strainer Gaskets and Seals Summit Racing $2.99 NAL-12499225 Chevrolet Performance Hydraulic Roller Lifters $376.27 561121916 PAC Racing 1200 Series Valve Springs Speedway motors $175.27 SUM-150106 - Summit Racing™ Camshaft Retainer Plates $14.99 SUM-350119BLK - Summit Racing™ Spark Plug Boot Protectors $49.99 TFS-30675600 - Trick Flow Timing Chain Brackets for GM LS $39.99 CLO-9-5417 - Cloyes Timing Dampers $15.99 CCA-1677-16 - COMP Cams Ultra Pro Magnum Rocker Arms $453.95 45013WT Water pump 2010 Chevrolet Camaro 6.2 RockAuto $144.99 12595365 GM GENUINE Valve Lifter Guide RockAuto $6.38 ea 12589226 GM Genuine head gaskets RockAuto $26.99ea MEL-MPE-900BR-GP EXPANSION PLUG KIT Summit Racing $22.34 ICT Billet 551621 ICT Billet Oil Cooler Port Delete Plates Summit Racing $17.99 MS92438 FEL-PRO INTAKE MANIFOLD GASKET RockAuto $19.60 VS50504R1 FEL-PRO VALVE COVER GASKET RockAuto $18.35 070-234-4317 ARP Head Studs HEAD STUDS Jegs $295.99 K1 LS1 383 STROKER BALANCED ROTATING ASSEMBLY 10.2:1 WISECO PISTONS $2,786.95 CNC motosports Be sure to read through everything carefully some items you might not need for your build let me know if you have any questions thanks for watching
@bandoblac_345 ай бұрын
I have a 94 suburban I want to put a ls3 in it will it fit and what would I need to make it work
@Slicpartna5 ай бұрын
Oh yea it will fit with no issues You will need motors mounts, Wiring harness unless you get the wiring harness with engine and a tune to remove vats (vehicle anti-theft system) The swap is simple. Only cut what you know you will not use or need out of the factory harness. Label before cutting anything! Let me know if you have any other questions Thanks for watching
@kurrentevent5 ай бұрын
I would like to kno what pistons, Rods, and crank you use.
@Slicpartna5 ай бұрын
K1 4340 forged steel crankshaft 4.000 stroke K1 forged 4340 steel H-Beam rods with 7/16" ARP 2000 rod bolts, 6.125 length Wiseco 2618 forged pistons, ArmorGlide Skirt Coating, .150 wall wrist pins I got the kit from cncmotorsports.com Let me know if you have any other questions Thanks for watching