@@wilatheroicstudios2466 how in the world is that so flexible?!
@wilatheroicstudios24667 күн бұрын
@@Natesemipro used a thin wall and light infill
@Natesemipro8 күн бұрын
Never in my life have I watched The Power Rangers lol
@wilatheroicstudios24667 күн бұрын
You're missing out lol
@buenso8019 күн бұрын
Thank you for a positive take on the x3 plus 😊
@TheHazardF527 күн бұрын
Holy shit this is amazing! Wish I knew someone with a 3D printer 😢
@wilatheroicstudios246627 күн бұрын
Never too late to get into it
@brandonlocklear6226Ай бұрын
Hello, Wil. My name is Brandon. I am contacting behalf of Flip Up Productions, a newly formed production company. I was wondering if you take commissions on the making of 3d files. A project we are working on has a few things that need to be designed. Your work is outstanding, and we would love to work with you.
@wilatheroicstudios2466Ай бұрын
Sure. What kinda of things?
@bigl723Ай бұрын
Where can I get the files for the morpher?
@wilatheroicstudios2466Ай бұрын
This was a release back in December 2023 over on patreon. The files were released for that month.
@thanhat6941Ай бұрын
Hi sir, do you sell it? i want to printing repain 🥲
@wilatheroicstudios2466Ай бұрын
The file for it is over on thangs thangs.com/designer/Wilatheroicstudios
@KruellNationGamingАй бұрын
the spray coat is what did the most work. you can skip the resin dabbing and go straight to the spray gloss.
@guiguimistoryteller2966Ай бұрын
Hey man thanks a lot, of all the videos i've seen people always skip the back part, thanks :)
@wilatheroicstudios2466Ай бұрын
No problem. Glad I could help. I've started a patreon since then so if you're into cool files give me a look at patreon.com/Wilatheroicstudios
@geekarchivistpearce8282 ай бұрын
As often as I have brought this up, unfortunately Wil, the Ranger fandom, not the Sentai fandom, has this part wrong every time. Nowhere, and I seriously MEAN NOWHERE, in the history of the samurai, have they EVER, EVER USED A NINJA STAR. This is based on Hurricaneger and one of the popular sports in Japan is baseball. Heck, I know we likely brought up Gokaiger when you were on my livestream once...and yet the Master Ninja (the green one) in Hurricaneger has a technique where the sword in the scabbard becomes a baseball bat.
@RolandoNatividad2 ай бұрын
I'd buy!! In a heartbeat
@steezy-geezy43872 ай бұрын
Also when did you start playing destiny 1 or 2
@wilatheroicstudios24662 ай бұрын
Started with d1. I stopped playing at the witch queen though. Expansions just kept getting more expensive
@steezy-geezy43872 ай бұрын
Cade is the best character in destiny’s lore also Ive always wanted to have this as like a real gun tho lmao
@12vs232 ай бұрын
So sick!
@matteomagri87153 ай бұрын
where did you find the printing parameters for the transparent resin??
@wilatheroicstudios24663 ай бұрын
Just guess and test lol
@matteomagri87153 ай бұрын
@@wilatheroicstudios2466can u give me your options??
@walidkhier56403 ай бұрын
Can you re use mean green??
@wilatheroicstudios24663 ай бұрын
Once the resin settles at the bottom and you filter it out I don't see why not
@LyfeWithJoy3 ай бұрын
Wow 😍😍😍
@robertmitchell59343 ай бұрын
i wish that this stuff was in the manual... i have been trying to figure some of this out. also i have noticed that your machine is slightly different thank mine, your control panel is different, mine has wash and cure, cure, play/pause, and cancel, mine doesn't have the reset button? i bought mine shortly after it came out, wonder if it had a revision, although the cancel button will do the same
@wilatheroicstudios24663 ай бұрын
I think they did. I didn't buy mines shorty after it released though. But yeah, alot of information on matiainence was lost or ill advised
@nelsikegamingАй бұрын
Might we well just clean my own prints if I have to clean this thing every 2 washes
@wilatheroicstudios2466Ай бұрын
@@nelsikegaming not necessarily 2 washes. You can probably go more. Just when you start seeing error codes it's probably time to clean it
@nelsikegamingАй бұрын
@@wilatheroicstudios2466 I just tried cleaning it (my prints are coming out full of gunk) and I've had it for 2 days: Used a toothbrush and sprayed 99% IPA and the cured resin just won't come off the basket. Returning this asap.
@wilatheroicstudios2466Ай бұрын
@@nelsikegaming oh man, sorry to hear that. See if you can get another one sent out. Anycubic is usually good about that if it's within the warranty period
@BloodmoonsForgottenhat3 ай бұрын
Hylia:”Oopies daisies. Sorry I forgot!”
@wilatheroicstudios24663 ай бұрын
😂😂😂
@thefoxyknifer15543 ай бұрын
Thats cool as fuck man good jpb 👍👍
@wilatheroicstudios24663 ай бұрын
Thanks man! Now, gotta start with that code
@redfoxsuperstar13 ай бұрын
Ooooh, that's sick af, now you just gotta sand and polish it
@wilatheroicstudios24663 ай бұрын
I think I'm gonna leave it as is. Tpu is hard to clean up like that lol
@injectionAI4 ай бұрын
How’s she holding up?
@wilatheroicstudios24664 ай бұрын
Still works like a charm
@thepizzacarpizza10564 ай бұрын
solution: make the spring longer a longer and windier spring exerts less force
@wilatheroicstudios24664 ай бұрын
Hmmm there's an idea. I'll see what I have in stock. Thanks!
@thepizzacarpizza10564 ай бұрын
@@wilatheroicstudios2466 Yeah, no problem I saw another video a little while ago that showed how the longer something is, the less force it takes to deform it, so I just thought that'd work here
@Coffees9334 ай бұрын
New subscriber
@wilatheroicstudios24664 ай бұрын
Welcome welcome
@louisewarnert70094 ай бұрын
Looking good, Will!
@wilatheroicstudios24664 ай бұрын
Thaaaaank you!
@ChefDansHookah4 ай бұрын
Very impressive. Is this available in STL, and what do you charge for the files? I don't do much on Patreon, but I would still like to support you this way.
@wilatheroicstudios24664 ай бұрын
Hey man, thanks for that. This was a patreon exclusive because my patrons requested it so it's only available on my patreon along with all with the rest of the months rewards
@ChefDansHookah4 ай бұрын
Then when I get paid I will see what I can do. I know it's not a lot, but I have to watch my pay like a hawk. I will check back with you on payday.
@wilatheroicstudios24664 ай бұрын
@@ChefDansHookah no worries. We all have to watch our pennies these days
@Toms_Channel4 ай бұрын
Tip: Resin doesn’t stick to the backings of stickers or silicone mats. If your curing station doesn’t have uv lights to cure from underneath, you can use those to put tour prints on. Question: wouldn’t uv resistant clearcoat achieve the same result, meanwhile protecting the model from yellowing?
@wilatheroicstudios24664 ай бұрын
To answer your question, I use to do that. But it never got that glass like surface finish
@Toms_Channel4 ай бұрын
@@wilatheroicstudios2466Thank you for the reply. That’s too bad, i would love to have that glass like end result for some objects… Maybe it’s just not possible with printing and i will have to resort to printing, making a mold and cast it with casting resin to achieve that glass like object. 😔 I like your result though, i was just hoping to get an even more perfect result. Oh well… I guess it’s not the end of the world if it’s not 100% perfect.😅
@HeaftyBlast4 ай бұрын
just discovered your channel, great content! i had a question, i used siraya clear and my print, whenever i clean it up, i get white spots in crevaces. will this process help clearing these blemish or do i have an other issue? thanks!
@wilatheroicstudios24664 ай бұрын
Sounds like your wash needs to be swapped out. If you use clear resin it may clear it up, but i think what's going on is your wash might be dirty enough to deposit uncured resin on to it.
@HeaftyBlast4 ай бұрын
@@wilatheroicstudios2466 that's kinda my issue, on my second print i did a first clean under water, in a clean recipient and the same bleemish appeared right away. my tank an iso were cleaned and new. :/
@TheRealClaylex4 ай бұрын
YOOOOOO THE LIGHTSPEED MORPHER?!?
@wilatheroicstudios24664 ай бұрын
Gotta show lightspeed some love!
@kappa1294 ай бұрын
I saw on Patreon that this was the welcome gift for March only. Is it still possible to get this? This is great!
@wilatheroicstudios24664 ай бұрын
I've actually moved it to the welcome gift permanently for all new patrons along with a few other things
@mitchellkeiser91355 ай бұрын
Huh
@wilatheroicstudios24665 ай бұрын
???
@mitchellkeiser91355 ай бұрын
@@wilatheroicstudios2466 nor a clue what this I'd about
@wilatheroicstudios24665 ай бұрын
@@mitchellkeiser9135 that's okay. Other people know what's up lol
@FrxMusha5 ай бұрын
Thank you bud! worked like a charm :)
@wilatheroicstudios24665 ай бұрын
No prob bob
@larssteinert51915 ай бұрын
my prints tunr our pretty yellowish, is there something i can do to prevent that?
@wilatheroicstudios24665 ай бұрын
Unfortunately that may just be the quality of the resin. You check out my follow up video to this. Might help kzbin.info/www/bejne/o6K5i4ycl7VrhZI
@digimaks5 ай бұрын
YEah, I got same crap happen after UV-curing. I will try same thing just putting the model outside on sunlight. The UV curing might be too harsh for that cheaper transparent resin.
@abdee525 ай бұрын
Do you need to sand it ?
@wilatheroicstudios24665 ай бұрын
You can to clean up imperfections and such
@PepsiChips876 ай бұрын
Hm...might be a stretch, but... Have you considered making the Decade Driver?
@wilatheroicstudios24666 ай бұрын
Negative. Would be cool though
@PepsiChips876 ай бұрын
@wilatheroicstudios2466 morphers turning out good btw. Painting the shells now. Worth the money.
@wilatheroicstudios24666 ай бұрын
@@PepsiChips87 nice! How are you liking it?
@PepsiChips876 ай бұрын
@wilatheroicstudios2466 It's turning out pretty good. Had to redo certain parts because they aren't as smooth, though--you must have a better printer. My cousin has a resin printer, so we're thinking he's gonna handle the coin housing since it's clear.
@wilatheroicstudios24666 ай бұрын
@@PepsiChips87 I had a few bouts with it actually. Had to really tweak my settings. Gonna be upgrading the design hopefully soon
@Timbodacious6 ай бұрын
cool its easier to just hold a small model and dip it in some resin and hold it while you rotate and cure it or you can just skip the resin and use the clear coat.
@josephzanabria93696 ай бұрын
awesome!
@hotcheetofingers6 ай бұрын
for the colored prints did you brush on clear resin? or clear colored resin? 😅
@wilatheroicstudios24666 ай бұрын
You can do either or. Same result
@endscreen1shorts4786 ай бұрын
With blender I worked in fusion for 4 months, I understand what you want to say, fusion has dimensions and is accurate, but should you learn to work with dimensions in blender? I hope that I will soon learn to work in blender and that I will never have to go back to fusion, and what if you make a 3d model in fusion and want to put a texture on the 3d model? you won't be able to do that in fusion anywhere near as much as you can with blender
@wilatheroicstudios24666 ай бұрын
There's a way to add texture in fusion but it's a much bigger work around than in blender. I did it with a few files of my own
@PepsiChips876 ай бұрын
So, whats the lowest tier to be able to get access to this...?
@wilatheroicstudios24666 ай бұрын
It would be the $8.50/month [hero tier] to get this in the welcome gift
@PepsiChips876 ай бұрын
@@wilatheroicstudios2466 Word. It's Morphin' Time. Er...it's about to be.
@PepsiChips876 ай бұрын
@wilatheroicstudios2466 We're having trouble downloading the files.
@wilatheroicstudios24666 ай бұрын
@@PepsiChips87 if you're a subscriber check the pinned post
@PepsiChips876 ай бұрын
@wilatheroicstudios2466 all good now!
@sevensvn53917 ай бұрын
The thor thing is addressed pretty thoroughly in Ultimate Invasion#1-4/Ultimate Universe#1, I'd say.
@wilatheroicstudios24667 ай бұрын
Yeah but this is an entirely new ultimate universe. Does that apply here??
@sevensvn53917 ай бұрын
@@wilatheroicstudios2466 Yes, Ultimate Invasion and Ultimate Universe #1 aren't about the original Ultimate Universe despite the fact some would argue they were falsely advertised as such, even the first issue of Ultimate Invasion features Earth 6160 Peter Parker being prevented from getting bit which ties into this comic. The whole introduction in the beginning of Ultimate Spider-Man is actually what I'd call a story that took place in Earth 6160 before it, though most might argue it's more so setup than a story unto itself.
@GeneralKatarn7 ай бұрын
Outstanding work!
@wilatheroicstudios24667 ай бұрын
Much appreciated! More painted prints on the way
@GeneralKatarn7 ай бұрын
@@wilatheroicstudios2466 I'm into scale modeling myself. Not the same but airbrushing to perfection is what we have in common. Also my weak spot for Green Ranger
@Shooter_FPV7 ай бұрын
Great video, gonna try it to see if it makes my clear prints better. Question: You cure it once with the UV lamp, then again but with your cure station. What is the difference? I don't have a UV lamp, but I have the Mercury X Wash/Cure. Does it matter if I cure it in there for the first pass?
@wilatheroicstudios24667 ай бұрын
The secondary cure is to make sure you have all the surface cured. The 360 in the cure machine ensures you did that. Using a lamp prevents it from being cured to the surface. Use a silicon mat
@makers_lab8 ай бұрын
Tried and tested method. And no need to apologise for the UV light; it's not going to come out of viewers' monitors and phones to hurt their eyes :)
@wilatheroicstudios24668 ай бұрын
Lol thanks!
@jeffcarter58288 ай бұрын
Thanks Wil!
@wilatheroicstudios24668 ай бұрын
You are welcome! A video on how to maintain and clean it is coming up soon!
@wilatheroicstudios24668 ай бұрын
Issue #2 Of Ultimate Spiderman Comes out end of the Month. If you want a video on that let me know!
@jacobcastillo56888 ай бұрын
The Dr Fate one will always have a place in my heart, it’s like I watched it grow up 🥹 awesome collection btw
@wilatheroicstudios24668 ай бұрын
Thanks man! When are you gonna start making your helmet collection?
@jacobcastillo56888 ай бұрын
@@wilatheroicstudios2466 I’ll make it…eventually lol
@Vursiel8 ай бұрын
Really cool dude, love the red hood helmets 👏🏼
@wilatheroicstudios24668 ай бұрын
Thanks! I have a whole collection of files of red hood. There's gonna be more lol