@@kikovalladolid4920 hi the seats are the original cream and brown piping seats. We simply got sections of them dyed black including the piping.
@kikovalladolid492016 күн бұрын
@@paultimmins1 where do you go for that I just bought my first boat it’s 2000 bayliner capri lx 1850 …yours looks similar … I am mapping out my restoration
@paultimmins116 күн бұрын
@@kikovalladolid4920 I just had a friend do it here in Northern Ireland. It has worn pretty good but the vinyl now nearly 25 years old so me and a friend have been discussing re trimming it all with a new colour just to freshen it up again.
@paultimmins116 күн бұрын
@kikovalladolid4920 our boat is a 2050 a bit longer but should be similar or the same interior
@penisenlargement231923 күн бұрын
Hello mate , did you join together the green and black wires from both sides then pin it straight into the HVAC unit ?
@Me87main29 күн бұрын
Some sort of mobile command center I assume?
@paultimmins129 күн бұрын
@@Me87main no this is actually used for B.A breathing apparatus training. It extends out and becomes a caged course that potential recruits need to crawl through in the dark.
@paultimmins129 күн бұрын
@@Me87main We have various other units for it a Welfare kitchen living unit and various equipment units I will feature them soon.
@Me87main28 күн бұрын
@@paultimmins1 Very cool, training trailers are always very neat!
@paultimmins128 күн бұрын
@@Me87main I will get some interior shots in the future of it and various other vehicles, when it's set up.
@dirtydogfpv6905Ай бұрын
smashing just what i needed top man
@Tuk670Ай бұрын
Ryet
@JS-dm2tzАй бұрын
Bayliner should take note. Awesome work.
@paultimmins1Ай бұрын
@@JS-dm2tz Thanks appreciate the comments. It's going and still looking great only the weather has been poor this season.
@Islay-d1z2 ай бұрын
A bit rough there ain’t it
@paultimmins12 ай бұрын
@@Islay-d1z yes it can at times
@AVPfan360pro2 ай бұрын
This is really cool man! I love the Batmobile build so much!
@paultimmins12 ай бұрын
@@AVPfan360pro thanks mate took a lot of vision and work. Was good fun to own I used to get followed everywhere when I had it loaded on my truck.
@bakeredwards2 ай бұрын
I have a black octavia, makes me want to give it a polish, nice job.
@paultimmins12 ай бұрын
@@bakeredwards blacks lovely when clean and shiny but a nightmare for showing marks up lol. Thanks for watching and commenting.
@gwenolechevillard24962 ай бұрын
Cool video, thanks! It looks like it was not part of a big event. How did you get access to Todds leap tracks? How big is the area? Thank you!
@paultimmins12 ай бұрын
@@gwenolechevillard2496 todds leap allow bikes to pay and play depending on size of group and what events they have on that day. We basically had free run of the place for about 5 hours.
@gwenolechevillard24962 ай бұрын
@@paultimmins1 thank you! I'll try as well 🙂
@buddyr32 ай бұрын
I think l just found another KZbin loop hole video!
@chanelgez21462 ай бұрын
wow 💯👌
@RobinDuncan-s6w2 ай бұрын
Bit of a newbie to this sort of thing! I’ve got a corsa E 1.4 vx line, do you know if it requires a physical rubber gasket? Or just “sump sealer”? Thank you
@paultimmins12 ай бұрын
@@RobinDuncan-s6w it just needs a tube of sealer mate to do the job.
@RobinDuncan-s6w2 ай бұрын
Thanks for the help mate, any recommendations?
@paultimmins12 ай бұрын
@@RobinDuncan-s6w if your buying a mew sump they usually supply sealer with it. Any good car motor factors will get you sorted.
@beatyoubeachyt83032 ай бұрын
Perfect music choice I love Capella
@paultimmins12 ай бұрын
@@beatyoubeachyt8303 thanks mate think it has a special part in everyone's life lol
@paultimmins12 ай бұрын
Check out my 90s oldschool mixes and other mixes on my channel see what you think.
@puki60753 ай бұрын
Great video, thank you !
@giuliostefan97133 ай бұрын
Bro you literally disassembled half car but not the mirrors.. why
@paultimmins13 ай бұрын
@@giuliostefan9713 just hadn't took them of at that stage. They are off now thanks for watching
@paultimmins13 ай бұрын
What Colour Should I Paint It ?
@Deltarcrebuildcenter4 ай бұрын
You audio is what's causing you to lose likes and views your picture isn't adding up with the sound
@paultimmins14 ай бұрын
Just watched it again I don't understand what happened with it. The video upload to the editing program was perfect. Thanks I will try to modify and fix . Sorry to all thanks for feedback.
@ravenmaster63644 ай бұрын
pure nostalgia whether you are a fordie a vw dubber or anything else, thsse cars and this era were the best 👍
@paultimmins14 ай бұрын
See Full Repair Video On My Channel Please Subscribe For Future Videos
@jacsonmuldrew67015 ай бұрын
Where did you get swim platform?
@paultimmins15 ай бұрын
Hi I actually designed it myself and got a friend who is an engineer to make it for me. He helped me with various parts of my batmobile tumbler project as well.
@topzozzle63195 ай бұрын
Great video, unfortunately this might be one of the jobs i'm going to have to do to my car, the sump plug is completely rounded on the torx bit and is immovable with vice grips. Any tips for a stuck sump plug or am I looking at a new sump? I did a slight bit of damage to the mating between the sump plug and sump with vice grips but it still seems to hold oil fine.
@paultimmins15 ай бұрын
Hi mate glad the video helped you out. I see 3 options for you. 1. You could weld a 13mm socket on to the sump plug and use a socket to take it off then replace it when removed. 2. You could use an oil extractor pump something like sealey make. This would allow you to suck the oil through the dipstick when you wanted to change it or 3. Replace the sump it comes with a new plug fitted.
@johncoldwell3405 ай бұрын
They copied ford mk1 focus they knew it was gunna rust 😂
@paultimmins15 ай бұрын
It's unreal how bad it gets so quick. This car passed mot 5 months ago.
@johncoldwell3405 ай бұрын
@@paultimmins1it's amazing what even some good tester miss from time to time but there are also alot that just can't be asked to actually just check the car properly
@johncoldwell3405 ай бұрын
But that rust didn't happen it just 5 months
@paultimmins15 ай бұрын
@@johncoldwell340 I have replaced plenty of these over the years. First thing I check when prepping a car for mot
@paultimmins16 ай бұрын
Like your videos mate gave you a thumbs up and Subscribed good choice of bike lol.
@LakesEnduro6 ай бұрын
cool video lads! should check out the videos i post i have the same bike! dropped a like and comment etc for you guys
@paultimmins16 ай бұрын
Thanks! Will do!
@TripleXXXLady-im5it6 ай бұрын
AWESOME cool!!👀👍
@soniamacari42517 ай бұрын
It's looking good.
@Jack-st2oj7 ай бұрын
Worlds nicest bayliner for sure
@paultimmins17 ай бұрын
Many thanks it feels great to get people looking at it taking pictures of paint etc. And the fact that all the wiring dash etc has been replaced it drives and feels like a newer boat. Thanks for the compliment.
@elbuggo7 ай бұрын
7:59 - that's a long bolt. You need to remove the rust on the threads from below to get it out.
@paultimmins17 ай бұрын
Yes thanks mate. Its an awkward angle to get a ratchet and torx into as well. The ones on the other van spun out by hand.
@elbuggo7 ай бұрын
@@paultimmins1 You first need to clean it from under. Guess how I know!
@paultimmins17 ай бұрын
@@elbuggo yes figured it out later on a real pain compared to most other seats. Finishing interior today a few bits recovered in stretch carpet etc starting to look nice now. You shall see in next video if you follow the project. Thanks for the help.
@vstrvcvrtv7 ай бұрын
Hot air should come from the bottom, but okay 😅
@paultimmins17 ай бұрын
Hot air comes filtered down over the car and the positive extraction draws it down and out through the bottom filters which catch any overspray. If it was the other way around the suction drawing up the air from the bottom would lift any dust and or overspray up and over the paint job defeating the purpose of the controlled climate in the booth.
@vstrvcvrtv7 ай бұрын
@@paultimmins1 I guess that's why ovens are meant to use infrared not air.
@soniamacari42517 ай бұрын
Is that Graham Bell 😂
@paultimmins17 ай бұрын
I could have a go at it.
@uptownbelfast3037 ай бұрын
I'm sure I spotted the Slidestepper
@paultimmins17 ай бұрын
There is only one side stepper
@jccruzh8 ай бұрын
nice week end ride
@paultimmins18 ай бұрын
Did you see yourself in the video. Hit the like thumbs up 👍 and let me know what number you were and how you finished ?
@KevinThomas-tl3oc8 ай бұрын
Hi pal can you help me with pictures and where which colour wire goes where please
@paultimmins18 ай бұрын
Hi I have sold the car a couple of years ago now so I don't have any other pictures but I will try to help you out. Do you have a car that doesn't come with heated seats? Did you purchase a wiring loom from a car with heated seats and did you get yourself a climate control panel with the switches to activate the heated seat ?
@falconlips54749 ай бұрын
No clear coat/UV protection?
@paultimmins19 ай бұрын
I like to polish them every year. Once you clear coat them you can't polish again and even the best clear coat can chip. It's a family car only takes 15mins to clean up every year for mot.
@falconlips54749 ай бұрын
@@paultimmins1 True, and if you're in the rainy isles you don't need much UV protection. I have an Echo (Yaris MK1) here in Oz, the headlights are yellow and cloudy and all the panels have lost clear coat
@dwightdell69539 ай бұрын
Twisted
@mashworthful9 ай бұрын
Did you add these wires to a D3 that did not come with heated seats? did you swap out the dash contoller to one that operates heated seats? did you swap out original seats for seats out of a heated Disco 3?
@paultimmins19 ай бұрын
Yes I purchased a interior and control panel and the wiring loom from a different vehicle. I removed the required wires from the loom added it to mine and the standard disco 3 has part of the wiring in place already .
@KevinThomas-tl3oc8 ай бұрын
What is your email please
@barriedoyle235410 ай бұрын
😂😂❤ MOT
@paultimmins110 ай бұрын
Old School Mix Also Available kzbin.info/www/bejne/aH_caoGJZt2Zhsksi=BjBn3og76YogYMy_ 🎉
@MrJKS100010 ай бұрын
how much would that cost
@paultimmins110 ай бұрын
Can't remember cost of sump now prob £200 to £250 for parts and labour.
@MrJKS100010 ай бұрын
@@paultimmins1 Thank you as i got told last year i have a rusty sump
@paultimmins110 ай бұрын
@@MrJKS1000 have a look around ebay etc the part is the expensive bit. Limited tools and time and you will be sorted.
@paultimmins110 ай бұрын
Half the people are looking at it, half trying to squeeze up the inside of it 😅
@undesignated349110 ай бұрын
Everyday at Esso for me
@claudiovitor379510 ай бұрын
Magnific. Sett. 100% perfeit.
@claudiovitor379510 ай бұрын
Eh. Euro. Denc. Magnific. D. Mas. 100% perfeit.
@starcor399110 ай бұрын
🔥🔥🎶🔥🔥
@paultimmins110 ай бұрын
Thanks for the likes and comments. Please consider Subscribing for future music and other videos 😊