2 жыл бұрын
3 жыл бұрын
3 жыл бұрын
4 жыл бұрын
4 жыл бұрын
Пікірлер
@dfqnexxus3710 28 күн бұрын
No coding or re pin the wires needed ?
@BOO5Tchannel 25 күн бұрын
No
@armengevorkian5008 29 күн бұрын
red are so much nicer. Great job and thank you
@BOO5Tchannel 25 күн бұрын
Thanks
@TheTruelakersfan Ай бұрын
AITs ?
@BOO5Tchannel Ай бұрын
Don’t know ait but I know iat which is mainly determined by how good of a intercooler you have not air box
@Ruebz_f30 2 ай бұрын
Great tutorial. I’ll be following this tomorrow when I install mine.
@BOO5Tchannel 2 ай бұрын
Thanks
@Ruebz_f30 2 ай бұрын
@@BOO5Tchanneljust did the rears. That bigger bolt in front of the strut bolt was so hard to get out but other than that it was easy. Will hit the fronts tomorrow.
@BingAbing808 2 ай бұрын
I installed my chase bays abs delete the exact way you did but my brakes are rock hard. Did you run into any of that?
@BOO5Tchannel 2 ай бұрын
No but maybe adjust the knob a bit
@ihasmax 2 ай бұрын
Do you even need the feet in the front or just added peace of mind? If the majority of the weight is supported on the cinder blocks with some forces on the wall seems like that alone is superior to standard wall mount and would be sufficient, no?
@BOO5Tchannel 2 ай бұрын
Not for my needs there is lots of support to the back half but the front would be weak and this is not heavy metal so yes needs front legs 100%
@ihasmax 2 ай бұрын
@@BOO5Tchannel thanks makes sense. I went with the Pros and have a similar cinder block ledge so trying to figure out what I want to do. Thanks for making this video!
@BOO5Tchannel 2 ай бұрын
@@ihasmax thanks!
@thecasualdiyer6729 3 ай бұрын
The damper bolt is backwards. The head of the bolt does toward the front of the car. Will it matter? Probably not. I've made the same mistake :)
@BOO5Tchannel 25 күн бұрын
Correct
@liubovifrango5191 3 ай бұрын
Thank you so much! your videos are amazing and helped me so much! God bless
@BOO5Tchannel 3 ай бұрын
Thank you!
@alexgarza8998 4 ай бұрын
How do you know how to set the top hat in the right direction? I tried installing today and I got everything right up until I screwed the top hat back into the top and when to Install the sway bar back and the bracket wasn’t in the same spot as before
@BOO5Tchannel 4 ай бұрын
Not sure what you mean it should work
@kalelcollins 4 ай бұрын
Hope you’re doing good man! I know you probably won’t answer, but I was wondering what ceramic coating your friend used at the time?
@BOO5Tchannel 4 ай бұрын
Adams ceramic coating from Amazon
@kalelcollins 4 ай бұрын
@@BOO5Tchannel Thanks bro!
@ganuv 4 ай бұрын
Should of went catless, better flow
@BOO5Tchannel 4 ай бұрын
Not a factor unless you go bigger turbo…
@jorgegonza1ez 4 ай бұрын
good video! just got mine today such an easy install and it really makes the car feel much newer. Remote Bimmer customer service was on point with their communication! Installed it on 2015 4 series
@marcusmartinez3692 5 ай бұрын
Looks the same
@BOO5Tchannel 4 ай бұрын
It’s not…
@PrecisionBimmer 5 ай бұрын
How do you have your Mac solenoid set up?
@BOO5Tchannel 5 ай бұрын
There is no Mac solenoid it’s a special boost solenoid borrowed from a Volvo that is run off brake booster vacuum because n55 does not make vacuum on the manifold
@chillstore9466 5 ай бұрын
the link for the rear discs says bmw e90… im looking for this kit for a bmw 420i f32 N20 . Can you help me please
@BOO5Tchannel 5 ай бұрын
It’s been a while you will have to google but I don’t recommend buying this kit for a 420i stock is fine for that model
@AmidArchibald 5 ай бұрын
Can you install catted downpipe on 340i without a tune??
@BOO5Tchannel 5 ай бұрын
No
@Saiyan585 5 ай бұрын
I went with Pilot Sport 4S. They're the best overall daily, imo with a 45 offset up front.
@carbonoxx 6 ай бұрын
do u need a tune after the downpipe?
@BOO5Tchannel 5 ай бұрын
Absolutely
@stashbob 6 ай бұрын
I have 2014 F33 MSport. Did you loose your original factory navigation with this upgrade? I know carplay has multiple navigation apps, but was just wondering (I like the navigation turn by turn directions in my HUD or will carplay do the same). Also, does carplay music songs etc. show up in HUD like factory stations/SiriusXM? What else did you loose due to the upgrade (i.e. steering wheel controls, voice commands, log press siri commands/messaging)?
@BOO5Tchannel 6 ай бұрын
I didn’t have navigation but you should keep and retain all factory setting get a hold of the seller and check with them but you will need it coded for your vin through seller or a coder
@kickedbacktatt 6 ай бұрын
Did you just rip the sensor out of the inside of the brake piece I’m changing mine and not sure how to get it out lol should I just rip since it’s going in a new place
@BOO5Tchannel 6 ай бұрын
No it comes off if you pry with screwdriver
@kickedbacktatt 6 ай бұрын
@@BOO5Tchannel thanks bro I just finished front brakes so smooth just waiting on back rotors . It’s sucks the package only comes with front
@camel070 6 ай бұрын
Hi there I wanna ask you. Did you get any error codes after installation and also foes the welcome bmw screen pop up at start up. Thanks.
@BOO5Tchannel 6 ай бұрын
No it is an oem product that was coded so no issues and all stock systems worked as it should again oem
@camel070 6 ай бұрын
I am asking you because I also upgraded from NBT to NBT Evo and I’m getting some errors with the head unit and also it doesn’t let me access the head unit with BimmerCode. did you try to code with BimmerCode thank you
@BOO5Tchannel 6 ай бұрын
@@camel070 no you need a real coder like someone remote access via laptop codemyeuro on Instagram can do it
@backcountyrpilot 7 ай бұрын
Home Depot gave me a $40 credit when I found a small dent like yours after opening the crate in my garage.
@camel070 7 ай бұрын
Hi what were the blue and green wires for that you didn’t use? Thank you.
@BOO5Tchannel 7 ай бұрын
No clue it’s been a while check your directions on whatever kit you have
@stephanheasley107 7 ай бұрын
Hey, I have a question about the wiring here. I was told by fuel-it that the red trigger wire, that you have hooked up to the Hobbs switch, needs to be hooked up to 12v power. I just finished the install and whenever my car is running, the pump is running/LED is illuminated. Are the red/black wires you have connected to the Hobbs switch two separate wires?
@BOO5Tchannel 7 ай бұрын
The Hobbs switch should be connected to ground once the connection is made it will ground and give power to the system
@stephanheasley107 7 ай бұрын
@@BOO5Tchannel thanks for the reply. I have the same hobbs switch as you, one of the ports on the hobbs is connected to ground. my question is about the trigger wires
@stephanheasley107 7 ай бұрын
Right now, I have the red trigger wire hooked up to 12v, and the black one hooked up to the hobbs switch. Is this the correct way to do it, or should I have both trigger wires connected to one port on the hobbs?
@stephanheasley107 7 ай бұрын
I'm wondering if I have it setup incorrectly, because right now as soon as I turn the car on I hear the 525 going and my LED lights up, even just at idle without any boost
@BOO5Tchannel 7 ай бұрын
Yes that’s definitely not wired right remember that ground is your trigger
@MrHouavang80 7 ай бұрын
Hey, I followed this and I can hear the pump turn on and everything when jumping the hobbs switch, but my remote tuner says secondary pump isn’t turning on. Is there anyway to know for sure? I hooked up an led light like you did and it also turns on when jumped.
@BOO5Tchannel 7 ай бұрын
So when you jump it, you can hear the noise of the pump turning on?
@MrHouavang80 7 ай бұрын
@@BOO5Tchannel yes I can hear it. I guess I should open it to check my connections in case a hose came loose. I did the install awhile ago but didn’t get an e85 tune until recently.
@MrHouavang80 7 ай бұрын
@@BOO5Tchannel so I checked wiring and removed the lpfp today and there’s nothing obvious that could be wrong. Only thing I noticed from your wiring that’s different is the white relay wire goes directly to the +12v battery but Fuel It has it going to the DME 12v “trigger”, is what they call it. Not sure if that would be a potential issue.
@itybitsytiny2000 7 ай бұрын
too many bad reviews for VLAND on Amazon. Condensation/Flickering/Not working/Gaps/Installation. Stick with OEM, or throw away the money each 4 months
@mohammeddrnawi5088 7 ай бұрын
Where did you buy them? Do they have a website?
@BOO5Tchannel 7 ай бұрын
Google them they go on sale on different sites all the time
@mohammeddrnawi5088 7 ай бұрын
@@BOO5Tchannel I have it, but the LED light does not work. I need an operating panel. I have lamps. Do you know which ones are sold? I did not find them on any site. Or send me a picture of them. Thank you for your response.
@RXS999 7 ай бұрын
What size are the rims and tires? Is your car lowered or any mods to get the wheels to fit?
@BOO5Tchannel 7 ай бұрын
Can’t remember but it’s stock fitment clearance like +35 18x8.5 or so check fitment industries for good fitment photos and they share sizes and offsets
@vinanguyen5918 8 ай бұрын
Great Tutorial! Thank you.
@BOO5Tchannel 8 ай бұрын
Glad it was helpful!
@F1L083 8 ай бұрын
It was not very too smart to locate filter box over the engine from BMW.
@JustLuuchi 8 ай бұрын
There’s literally no point if it’s this difficult. Better of just putting any bigger turbo on. I’ve heard N55+ or pure stage 2 or even cts turbo
@BOO5Tchannel 8 ай бұрын
Still have to do major supporting mods it’s not just plug and play
@JustLuuchi 8 ай бұрын
@@BOO5Tchannel what supporting mods ?
@BOO5Tchannel 8 ай бұрын
@@JustLuuchi lpfp, hpfp, port injection in some cases, intercooler, down pipes, etc just do research if you want to go bigger turbos that how it goes. Everyone thinks it’s just plug and play but it’s not even close
@JustLuuchi 8 ай бұрын
@@BOO5Tchannel I have FBO all that just not lpfp upgrade I’ve been told I can just do hpfp and then get turbo
@BOO5Tchannel 8 ай бұрын
Get with a tuner first since you can’t use off the shelf tunes in most cases with turbos and he will tell you what you need to not fry your pistons
@wcmauldin81 9 ай бұрын
I have the blue m sport calipers on the front but normal calipers on the back. Is there a place to order just the rear m sport calipers?
@BOO5Tchannel 9 ай бұрын
eBay usually has them. Sometimes you can get them from ECS and definitely can be ordered from bmw, I use getbmwparts.com
@500fxbr5 9 ай бұрын
Very good! Regarding the weight, please tell me how it compares to the genuine product.
@BOO5Tchannel 9 ай бұрын
It’s about half the weight
@oscarbrown634 10 ай бұрын
Are you in Northern California?
@BOO5Tchannel 10 ай бұрын
No
@Mrworkout213 10 ай бұрын
Hi Chris, thank you for your video. Great job on the installation of the cabinets. I will be purchasing mine in the next couple of weeks. Great idea on the blocks. If I could recommend you should paint the blocks black.
@BOO5Tchannel 10 ай бұрын
Thanks, yes I actually did end out painting them and coating them for waterproofing when washing floors!
@Gamer-co5kl 10 ай бұрын
This is the best tutorial. No cuts no edits, just show literally every step. Great job guys!
@BOO5Tchannel 10 ай бұрын
Thanks man
@nickherrera577 10 ай бұрын
Did these on my car and learned SOME E82s needa have em programmed; my car was one of em haha. I threw em in plug n play as is, & they didnt illuminate my buddy coded them and $70 later we got em to work😅💪 fyi for some of yall!!
@BOO5Tchannel 10 ай бұрын
Crazy, I got lucky so far did 3 cars never needed to program… luck of the draw
@ingametrapper720 10 ай бұрын
cool video, shouldn't the new brake system be coded to the car so that the car and the cruise control were told that a bigger brake kit has been added?💪🏼💪🏼
@BOO5Tchannel 10 ай бұрын
Works with or without because the brakes are exact same size only thing bigger is the rotors, however I did code them and noticed no change lol
@MW_1420 10 ай бұрын
How did you get around the slack in the yellow.black wires on the driver side getting tangled in the spring on that side?
@BOO5Tchannel 10 ай бұрын
Not sure what you mean but didn’t have issues and car was sold a few years ago so can’t look
@theodorecendejas1343 11 ай бұрын
Was this on bm3 stage 2 e30 or stage 2+ e30 and stock or upgraded hpfp? Good numbers by the way.
@BOO5Tchannel 11 ай бұрын
2+ I believe at the time stick pump
@theodorecendejas1343 11 ай бұрын
Thanks for the reply bro. I very much appreciate it.
@enginharman8594 11 ай бұрын
Great video. This is exactly what I was looking for. Did you experience any issues with connected services?
@BOO5Tchannel 11 ай бұрын
No everything works great
@enginharman8594 11 ай бұрын
Thanks. Very helpful…this seems the route to go instead of an MMI box.
@BOO5Tchannel 11 ай бұрын
@@enginharman8594 by far, this is oem not aftermarket
@agapeagape1 11 ай бұрын
What about water drainage??
@BOO5Tchannel 11 ай бұрын
Well it gets a little wet at times but so does your engine bay…
@jorgesolano198 11 ай бұрын
Is there any rubbing ? Aswell as clarification on wheel offset you got im currently on stock suspension
@BOO5Tchannel 11 ай бұрын
Car was sold but I think it was conservative like +38 for no rub you can check fitment industries for more fitment options
@grantbothwell9687 11 ай бұрын
I just got 17x8.5 et35 with 225/45 tyres, hoping it doesn’t rub.
@BOO5Tchannel 11 ай бұрын
45 is quite thick@@grantbothwell9687
@Saiyan585 5 ай бұрын
@BOO5Tchannel 45 is height. He should be fine, being the wheel is a 17.
@chukuianopogba8198 11 ай бұрын
You’re the best!!
@BOO5Tchannel 11 ай бұрын
No, you’re the best! 🙏
@johnjimmers9356 Жыл бұрын
thank you i needed this, i had the single piston brake booster delete installed but im putting the booster back on, just wasnt sure how the lines go with the oem master
@BOO5Tchannel Жыл бұрын
Glad you found it helpful!
@6mtcruiser Жыл бұрын
how did the performance feel before and after? i hate the idea of DCI sucking in all that hot air wonder if this is a good alternative
@BOO5Tchannel Жыл бұрын
Honestly all these intakes are similar, on dyno you get most hp gain from open intakes with no filters however on normal driving you benefit more from stock intake box
@grovsey3656 2 ай бұрын
Its called a intercooler.....
@pinarellospeedracer Жыл бұрын
Hey I have a question I have a 2010 Z4 non turbo will this intake work on it
@BOO5Tchannel Жыл бұрын
No clue man that’s question for the company. I only know my cars I do not know other models sorry
@Instrumentalo Жыл бұрын
thank u, did that job in 2 hours instead of 4 ❤
@1Mean_F30 Жыл бұрын
Hey man great video I had a quick question does the o ring concept apply to a stock turbo as well? My friend and I installed this same bov and it was code less for a good month or two but now it just pops up “ 122108 - Blow-off valve: Clamped closed.” Any help would be appreciated!
@BOO5Tchannel Жыл бұрын
Wish I could help but I have no idea… check electrical connection to bov is best I can say. Check with your tuner if it’s a custom tune they can usually diagnose
@1Mean_F30 Жыл бұрын
@@BOO5Tchannel still on a ots map unfortunately.. I’ll let my friend know about that electrical connection your talking about. Have you ever heard anyone have any issues with this bov on a stock turbo ?
@BOO5Tchannel Жыл бұрын
@@1Mean_F30 anytime you introduce a part such as a bov on a car that needs a electrical pressure switch you can have issues. Sometimes staying stock on stock turbo n55 is better… you don’t get any benefit from a bov unless you go bigger turbo
@joshuavalencia7543 Жыл бұрын
first i want to thank you so much for this video ... i just finished putting the lowering springs on my 440i and this was the best video to help me through it... For FYI if you dont have the strut seperator you can use a 3/8 to a 1/4 drive save a couple bucks.... thank you again!!