Talking about not explaining very well, you did exactly that and I’m a machinist.
@james-cg7mq29 күн бұрын
I’m gonna heck that Same thing here but for me it’s different maybe This 4x4 has been in the eye balls of snickie Characters some that wanted the 4x4 then sat in the grounds for a few years
@1953mikeee2 ай бұрын
Thanks greatly I had the same problem and you solved it 😂
@MrMoosekiller312 ай бұрын
It's hit an miss with that chinese crap you just never know sometimes they work but sometimes they don't or work for two rides an quit OEM there's a reason they cost more lol I'm in same situation with my 70hp outboard I was having a firing issue replaced everything but the Powerpack I bought one off Amazon I don't know 100% if it is a Chinese knock off I have to look However the reviews were mixed that's all I remember so with that being said I'm thinking it was a Chinese one even though I paid around 150-200$for it which might be cheap idk first one I buy went for one ride and suddenly quit in blink of an eye won't cough fart sputter nothing after everything else I replaced new OEM so Im steering towards that dam power pack being a Chinese p.o.s hard to check spark by yourself when the engine cylinders are pointing horizontally out the back of the engine and the key is almost at the front on right side almost need a second ignition at the back nest there transom lol I may possibly have a spare Powerpack that I know works on my 60hp johnson wether it is the same as a 70 evinrude a few years apart I'm not toi sure pain just a pain Im the ass I'm just happy it quit 80feet from the boat launch and not way down the lake where I just came from lol everything right down between the stator plate to the spark plugs has been replaced with OEM parts the fact I remember a few reviews saying they didn't work is a hit il have to take I just wanna make sure thats what it is I'm pretty certain my 60 has the identical power pack hit a rock busted the bottom end it ran like a dream 1970-72 Jonson 3cyl tough old engines my evinrude is a 1975 changed everything practically on outside was a barn find had great compression so she ain't dead yet did fuel and water pump propeller three coils leads and caps and plugs cleaned out the carbs which were spotless anyway I had to pull the carbs again cause I noticed the fuel line was deteriorated inside and it's was all broken brittle and just fell apart more chinese shit I'm always looking for parts and things like that come in hande and last long
@Raymond-v7g2 ай бұрын
Thank you brother cos I'm dealing with this very problem🤠👌🇺🇸🇺🇸🇺🇸✌️
@laynearaya34044 ай бұрын
Excellent
@leelovins3347 ай бұрын
Man ive git one that has got me pulling my hair out mine is getting pulse at cdi going in nothing coming out ive awaped cdi stater out of running bike nothing ive got something grounding out on harness has to be. Bad thing mine was running pulled engine put different engine on no spark i put cdi and stater and pulse pick up out of old engine that was running norhing ciming out of cdi
@specialned24396 ай бұрын
Yea could be a grounding issue. Or could be one of the pins pushed in on the plug? Hard to say
@EthanSmith-hs7em8 ай бұрын
What makes honda ruby honda forman 2005 500 fire...?😅
@specialned24398 ай бұрын
I'm sure it's the same for all them. The stator sends out all the voltage to your charging system and to your cdi box.
@greggory4489 ай бұрын
Futnmuts
@fixit274711 ай бұрын
I had no spark got a new coil put it on went good for a day now back to no spark any suggestions.
@specialned24398 ай бұрын
If you bought a off brand online it could just be a bad part. Check to see if you are getting voltage to the coil
@gregoryborowske6423 Жыл бұрын
Hey just got through watching your video and thanks for the info I'm in the same situation with mine. Going to garage and check my wiring! Let you know what I found out. Thanks again
@KevinFriendofJesus Жыл бұрын
Very helpful video!!! Thanks buddy.
@specialned2439 Жыл бұрын
Glad it helped!
@MgHeslep Жыл бұрын
Thanks man god damn 3 weeks
@davestallard5495 Жыл бұрын
Cdi the original problem ya think then? If factory stator was good?
@specialned2439 Жыл бұрын
Not sure, could have been but I didn't get involved with working on it until the new one didn't fix the issue
@natm3145 Жыл бұрын
Will that cause a no neutral light? But still cranks with no spark
@specialned2439 Жыл бұрын
Not in my case. Neutral light was on and everything seemed to be in the normal position to start.
@joshv3068 Жыл бұрын
Conclusion...buy oem or something a performance company makes
@toutounestef Жыл бұрын
Thays not the fact for me ffs. I'm still stumped. Trying new things everyday and still cant figure it out. No spark.
@pullinpork4.822 Жыл бұрын
Try giving the light green/red stripe wire ground from the neutral safety switch. It will be a 2wire plug grey and light green/red stripe. Wires come from bottom rear driver side of engine. Give the light green/red stripe wire ground. This will work if your Neutral light will not come on and you have no spark. Hope this helps, worked for me.
@mariomolinaro9599 Жыл бұрын
Thank you so much for this video, I had my ATV at 2 shops and the dealership with no help. The ATV has been OOS for over a year and today she lives.
@specialned2439 Жыл бұрын
Awesome! Good deal
@bruce7259 Жыл бұрын
My foreman wouldn’t spark . It was the voltage regulator that’s mounted on the right rear fender well
@rustyshackelford94147 ай бұрын
Is that a working fine one minute and then out of the blue it just won't start issue?
@danascott1980 Жыл бұрын
I’m confused??? If it came from the factory with those wires reversed, how did it ever run to begin with?
@specialned2439 Жыл бұрын
It hadn't ran since that stater had been replaced. The four-wheeler belonged to my brother. It stopped running and he began replacing parts. Not sure what went wrong to start with but when he brought it to me it wasn't running and this is what I found.
@mechanicforlife9468 Жыл бұрын
Great video. Thanks
@fixtritephil77122 жыл бұрын
The 5.5 OMC CANNOT be done like this 10 HP
@fixtritephil77122 жыл бұрын
You CAN just buy that bypass cover and install a 1960 factory fuel pump,easy peasy....Discount Marine Bark River Mi.
@joebrewer19903 жыл бұрын
I'm about to try this on my 53 johnson I hope it works
@specialned24393 жыл бұрын
Good luck buddy!
@joebrewer19903 жыл бұрын
Mine doesn't have that exact plate but I'm trying to figure something out
@specialned24393 жыл бұрын
Might not look exactly the same but should have a plate the serves the same purpose.
@brianyoungs3373 жыл бұрын
How about a part number and source for that fuel pump.
@specialned24393 жыл бұрын
I have no idea about a part number. I just jumped on ebay and looked up Briggs and Stratton fuel pump and went with one
@shannoncomstock53273 жыл бұрын
That Is the best explanation of this conversion that I have seen. Thanks for making it so simple!
@specialned24393 жыл бұрын
Thanks buddy. Glad I could help
@slowjamcdub3 жыл бұрын
What should your gas mix be???
@specialned24393 жыл бұрын
On that engine its 50:1 but it varies. A quick Google search would tell you what yours should be
@sir.icefire54703 жыл бұрын
Thanks brother. Bringing my 1960 sea king back to life
@specialned24393 жыл бұрын
Awesome! Good luck
@caseycrisp71873 жыл бұрын
I’m also doing a 55 Evinrude vtwin do I need to buy the adapter plate or can I mount on transom or anywhere as long as my hoses clear
@specialned24393 жыл бұрын
I'm not sure i follow. What adapter plate are you referring to?
@caseycrisp71873 жыл бұрын
It’s on eBay and a KZbin video shows the conversion of a 55 vtwin and you have to get the adapter to exhaust plate manifold to give you the pulse to the fuel pump
@specialned24393 жыл бұрын
Oh ok your talking about buying the cover plate that has the nipple in it? Or the intake manifold that is set up for fuel pump? Welll either way yea you can mount the fuel pump wherever you like as long as you have either the adapter or you drill and tap the port cover yourself. You must have that for your diaphragm fuel pump to work.
@GonzoAudioTips4 жыл бұрын
What part did you tap? I have a 1955 EVINRUDE 7.5 Fleetwin I’m trying to do the same thing
@specialned24394 жыл бұрын
I tapped the actual cover. The cover that has two screws holding it in.
@Bluegrassmuskellunge4 жыл бұрын
You need to tell everyone to like and subscribe
@katielewis18994 жыл бұрын
Sounds good Nute!
@Bluegrassmuskellunge4 жыл бұрын
Chum it up Ned!
@katielewis18994 жыл бұрын
Boats and hoes
@cookie694204 жыл бұрын
How she running today ? I'm thinking of doing this to my Fd-13 Johnson
@specialned24394 жыл бұрын
I sold it a few months ago but she was still running great! Haven't had any complaints from the guy so I'm guessing it never gave him any issues.
@7minibike24 жыл бұрын
Thanks I'm going to do that the same way seem easier that all the other ways I have seen good video
@specialned24394 жыл бұрын
Hey thanks man! That's the easiest way I've found to do it. Good luck!
@willardutterback31635 жыл бұрын
Notta sniff...
@willardutterback31635 жыл бұрын
Man them are wicked for free seem pretty solid can't wait to see what they do on the river.
@specialned24395 жыл бұрын
Yea I cant wait to give these babies a test run!
@sybrandvannierop92453 жыл бұрын
Yepp just bought one thanks for the great vid!
@psstplease5 жыл бұрын
Good video... straight to the point...clearly explained. Will be doing this to the exact same motor
@specialned24395 жыл бұрын
Thank you for watching and commenting. I enjoy the feedback. Pleas give me a like and or subscribe..good luck with the fuel pump upgrade!
@willardutterback31635 жыл бұрын
High speed low drag
@specialned24395 жыл бұрын
Yes sir!
@katielewis18995 жыл бұрын
Ain’t the sharpest peanut in the turd 😂😂😂
@willardutterback31635 жыл бұрын
Sharpest peanut in the turd. That done it right there I have heard it all.
@austincaudill25165 жыл бұрын
Great review!!!
@specialned24395 жыл бұрын
Thanks man!
@willardutterback31635 жыл бұрын
High speed low drag
@specialned24395 жыл бұрын
Haha shoot yea son!
@katielewis18995 жыл бұрын
Good video
@specialned24395 жыл бұрын
Thanks!
@joeenders34525 жыл бұрын
How deep do those lures go ??
@specialned24395 жыл бұрын
They dont dive real deep. I want to say 12 to 14 inches at most.
@Bluegrassmuskellunge5 жыл бұрын
I want results!!
@specialned24395 жыл бұрын
I have more lures coming from wish Haha
@katielewis18995 жыл бұрын
Nice
@katielewis18995 жыл бұрын
Nute! Good video !
@StopFishingStartCatching5 жыл бұрын
Thanks for the video...I've been thinking about getting some! Looking forward to the next vid!