This vid smells hot

Put the round on the ground and kneel on it so it doesn’t move, stop fighting to do it the hardest way possible… could be so much easier if you just thought before doing it… the bigger question is how is it holding up after a year?

Was that a fly in your mash tub you put the grain over??? If I noticed it you should have done. And I am in England . Is it 3000 . Miles away . So my eye sight is not bad then from this distant. To spot the fly? . Just come across your vid on the settlers auger along with your son . Great . Honest video . And interesting to watch . ( I was looking at an auger variety . On Google . To see what the uk prices were and the best deal . When I found you vid . And I enjoyed your blog ) so that's how I came across you . Then decided to watch you brew . 😮 what does the brew taste like? And is it a winner with yourself. Would you buy the brew kit again? Best regards to you and family from the UK

By using lock tight, you did not get a true reading on your torque wrench. I hope it's close enough to not fail prematurely.

KLEBREIS 5 Pack Silicone Fermenting Lids,Mason Jar Lids Fermentation Lids Silicone Airlock Lids Wide Mouth Mason Jar Pickle Cap Waterless Airlock Suitable for 86MM Caliber(Jars Not Included)

pool's filthy, what did you expect

Dude this video sucks

Sometimes it makes more sense to use the settlers tool before you cut the log w/a saw. If you have to hold the log as you are doing you loose so much torque and your energy is wasted. Whenever you use this tool the less effort you exert holding the log the more energy goes into the tool. A follow up vid??

Thanks for specifying the torque specs. Legend !

On a new clutch should the pulley spin freely or be tight? I just ordered one and it’s very difficult to turn the pulley straight out of the package. Thanks

Dont use thread locker, it changes the torque requirement which must be accurate to ensure longevity of the clutch

This video suxk 😅

This is a BEFORE and AFTER PHOTO it is NOT how to replace the PTO clutch. You did all of that off camera. NO help at all

Would have liked to see the clutch plug removed and installed

I would thumbs up but u didn’t even show the wire part

Didn't work on mine

Absolutely useless video. Didn't show how to remove or install.

Do you have a video of putting the cable on

Thank you for the video, it really helped me a lot and saved a lot of money

Why do all the other videos tell you to remove the entire deck??????? Your demo is Badass... Thanks...

If you manifold two tanks together you now are pulling less from each tank thus slowing the rate of the lpg going from a liquid to a gas therefore evading the freeze ups.

What a waste of time. Nothing to "see" here.

The crappy thing with all these clutches is the fact you can't just press out the bearing. The bearing fails...you have to replace the whole unit. Why do they do that 😮

👋😁🍻👍

I hope you didnt use red threadlocker on that small pulley bolt😂 I would just use new bolt and torque properly, just in case you need to remove that pulley in the future for any reason😂

You're not gonna be able to temper anything with a toaster oven.

Tip. If you wanna keep your price straight and get a more even “upset”. Stick it in a short piece of pipe that has the inside diameter of roughly what you want the larger diameter of your rod to be. Then just wack it with a hammer a few times and wallaa.

What material do u need to forage ,?

Zero help for my zero turn! Not showing the salient parts of the process just leaves everyone in the dark about how to actually remove/install.

In my case, I need to take the clutch off to replace the belt, but the bolt won’t budge and the motor just turns over if you put a impact wrench on it what’s your suggestion?

Grass still clogged up

Gravy,pies,sauces etc....anywhere you'd use Worcester Sauce....the ones you can buy here (UK) are too salty...home made you can adjust...

Tomato 👎

Thank you.

Umami or Unami?

A trick I literally just used before watching this video is I pour hot water over the tanks and regulator to keep things flowing smoothly. I live in my RV and use two, 100 pound tanks for supply and in this current weather we've been having, it's currently 4 degrees F outside, and I was awakened this morning at 5:00 am. to the sound of the heater trying to fire but it couldn't. I went out to check and sure enough, everything was frozen. I couldn't even turn the switch over valve on the regulator! I went inside and filled two, one gallon water jugs with hot tap water, my water heater runs at 140 degrees, took them outside and thawed everything out. I just poured the water over the regulator, line and the tank currently in use as it wasn't even near empty, and before I used up the first gallon, everything went back to running fine.

Thanks for sharing Shawn. Awaiting part two.

It’s not “UNAMI” lIke you said. It’s UMAMI. Kind of important to get the words pronounced correctly if you are making a video.

Great to see a vid from ya again..will be interesting to see you taste it..thanks Shawn 👍🏻🍻

Good to see a video from you. I’m interested to see the next video with the finished product. How’s the Latin coming?

Moses gave Hoshea son of Nun the name Joshua (Numbers 13:16) The joke goes: Who in the bible did not have a parents..... Joshua (Hosea) because he was the son of none (Nun).

Try rapping the end of drill with leather piece, glove or cloth rag so it is easier to hold. The wood crafts tool and projects have a learning curve to get good at the skill. Watching a video on how to do it or have teacher show me is what I will do. Tool seemingly works if it holds up to uses then it is good.

Getting out and making memories with your son is the important part. Trial and error with the tool may get him problem solving. Enjoy!

I think you fire was far to large for 1 piece of meat; cooking at a low temp, over a greater period of time may work out a little better for you. Thanks for the video.

I have the 4 probe, the device connects to wifi and each probe connects by bluetooth. It's awesome.

M us hroom sauce is supposed to be brown ad leave it to ferment for a year in a dark place bury inthe ground

Keep a piece of leather with the tool to wrap around the auger when using the scotch eye part.

Have a link for that one in particular?? I’ve ordered a couple non as stout as that one!

i just got the meter plus its very confusing but good video bro

Given the watery consistency of mushroom ketchup, do you think it can be successfully used to wet brine meat, imparting not only saltiness to the meat, but also the umami mushoominess?