what happened to part 2? I wonder if you couldnt make it between those narrow trees further south.
@joethepro70502 күн бұрын
Super duper!
@MrSweeden16 күн бұрын
What optic is this
@TheSebackers12 күн бұрын
What about if you want to take the snorkel off, will there be a big hole where it was installed or what's the best way to go about that? Was looking at buying a prospector aev xl truck that had snorkel but want to take it off when I get it just not sure if there will be a giant hole or something.
@137adventures12 күн бұрын
@@TheSebackers there will be a hole so it’s a permanent mod
@BloodAlwaysFindsItsLevel17 күн бұрын
Awesome video and trip. I'm a Ram man from birth till death. But that Ford should not be blamed, those KO2s failed that truck, and I'll leave it there.
@GregoryGrone-vb7qe19 күн бұрын
Appreciate the intell.
@GregoryGrone-vb7qe20 күн бұрын
The performance trigger is advertised as 5lb trigger pull weight bro. It's written in plain English on the packaging. I'm literally looking at it right meow. That's a half pound reduction from BNIB Glock trigger weight. It's the breaking point and take-up, as well as the reset that sets this trigger aside. It's a more clean felt crisp break. As opposed to the sponge gritty pull from the factory.
@MindUrbusinesss-pr1zt18 күн бұрын
Mine says 4lbs on the packaging
@kevinpeoples359622 күн бұрын
What type of sight is that
@daveretallack751628 күн бұрын
These info hints made the installation of the new trigger a walk in the park!
@Jackal_BlitzАй бұрын
It's a little odd how the wings of the bumper come out wider than the stock body lines. Apart from that though, the light mounts are badass.
@ponce1521Ай бұрын
Do you have any lift in the front or back? Truck looks sick!!
@chaz6578Ай бұрын
To much noise. Next video please
@petergraziosi97162 ай бұрын
I just installed the GPT into two G26's and installation was easy after watching the video. Both triggers feel about the same although one slide is difficult to take off using the takedown levers. I will admit that particular G26 was always a bit difficult in taking off the slide but now it's twice as hard. The slide on the other G26 comes off as expected. Hopefully going to the range tomorrow to see if how it shoots.
@DeliberateNRandom2 ай бұрын
I have a Move bumper im going to install. Once I remove the original bumper, should I disconnect the airbag sensors entirely? Same question for the fog lights. I have the full ABS bumper.
@evoverride2 ай бұрын
Thanks. Just as easy as you made it look. Awesome oem upgrade. Miles better than the stock trigger. Hated how the original trigger safety wouldn't sit flush when the trigger was pulled. This one will and is much more comfortable to shoot. Looked at aftermarket stuff but was nervous about getting a trigger too light for concealed carry. This one is perfect. Slightly lighter with a much cleaner break.
@dominica27652 ай бұрын
Might want to show what it looks like at night
@beforedeth21042 ай бұрын
U missed back strap pin for instructions btw
@BanditApache-nd6lu3 ай бұрын
Apex, Overwatch Precision, Boogeyman Customs, and Agency Arms. The only triggers worthy of being installed in Glock pistols.
@richperkins51923 ай бұрын
Dude the happy Gilmore setup was classic. I must have watched that movie 1000 times as a teenager
@Corbin_Krueger3 ай бұрын
this video is perfect thanks so much
@DanielInfrangible3 ай бұрын
Hey y’all, I got a GPT installed on my 19X MOS, and 99% of the time it functions 100% of the time. But for that 1% it get’s stuck. Still fires, but takes about a 15lb trigger pull, and then goes back to working perfect. It feels like the trigger safety isn’t being disengaged, but I’m fairly confident that isn’t it. It’ll do this malfunction for multiple shooters, and we pass it around when it happens and everyone experiences it. It’s oiled, clean, and the striker sear and trigger bar are spotless. Does not do it while dry firing.
@josephreeves93473 ай бұрын
Just installed my GPT in my G19 following along with your video. Excellent work, thanks!
@cd4playa12453 ай бұрын
Just installed mine. I really like it. It’s not as light as I would have thought but I don’t mind that. It doesn’t feel like it should be called a “performance” trigger, it feels like it should just be the new stock trigger.
@richardengland33764 ай бұрын
Sorry guys and thank you for your service we wouldn’t be free if it wasn’t for you
@clintchapman43334 ай бұрын
Rest well my brothers, you are home now.
@georgepeak8614 ай бұрын
Perfect timing for the algorithm to show me this. Installing on my dagger this week.
@georgepeak8614 ай бұрын
It went well and seems to function great. I get to shoot this weekend.
@4phishn4 ай бұрын
I see at least 8 differences visually. Hence "I see".
@spencerandrew89454 ай бұрын
I cant believe i was actually worried about thos install, thanks for the vid that was super easy
@cezarmon14314 ай бұрын
How did you take the tow hook off ?
@137adventures4 ай бұрын
Breaker bar.. that sucker was on there! Lol
@evanclark65474 ай бұрын
Just got mine in about an hour ago. It just stuck me tho.. is this advised for an EDC? It’s gotta be a little less safe being a lighter pull, no?
@jamessanders44204 ай бұрын
I carry mine daily edc. Only more dangerous if you’re playing with the trigger cause it’s easier pull. But who does that? Hopefully no one. Finger off trigger till you’re ready to pull it at the intended target and it’s perfectly safe
@danielmackormack85244 ай бұрын
Thank you for showing this ❤
@albertmedalla39415 ай бұрын
Great video thank you
@IchigoTheQuincy5 ай бұрын
Am I supposed to leave that rubber band on the trigger on the trigger? Or should I remove it
@IchigoTheQuincy5 ай бұрын
Just saw someone asked this already, I left it in there and it’s been In there for about 500 rounds. Should I remove it? 💀
@HaroldGodwinson245 ай бұрын
I really appreciate this video as it taught me how to install in under five minutes. I am also grateful that I didn’t have to unnecessarily spend a lot money to a “certified Glock Armorer”. Thank you sir!
@jeffb57135 ай бұрын
AHH , makes a water mess , clean it with a clean rag and done
@TheJeremyadams5 ай бұрын
Thank you for the great video! I just installed the trigger.
@HaroldGodwinson245 ай бұрын
Do you remove the rubber band off the Glock Performance Trigger before installing?
@137adventures5 ай бұрын
Yes
@HaroldGodwinson245 ай бұрын
@@137adventuresThanks!
@Slaughter_Pit5 ай бұрын
wow that was much easier than i thought. my trigger also came with that plate on the back of the slide, i dont know if i need to swap it out but i just left the old one in with no problems. thx bud
@picazzo51505 ай бұрын
Great step by step video, without any hesitations or mistakes, Thank you.
@wildboyzzzz5 ай бұрын
Ive seen 2lb trigger assembly from texas for like 150$
@KPad875 ай бұрын
Just bought one can’t wait to install it
@joelarsen96795 ай бұрын
OPEC sets the prices
@diddannydoit5 ай бұрын
been there.
@attybong6 ай бұрын
so, how did you optimize that glock performance trigger then? 😢