5 жыл бұрын
5 жыл бұрын
6 жыл бұрын
6 жыл бұрын
6 жыл бұрын
6 жыл бұрын
6 жыл бұрын
6 жыл бұрын
Пікірлер
@罗明祥 Ай бұрын
怎么计算同步数据
@PauliusR93 3 ай бұрын
Hello. Do you know how to generate remote? Is VVDI2 enough to make key fob work?
@haroutiounhalladjian 3 ай бұрын
@@PauliusR93 Hello, if u have a working key so vvdi2 can do, so follow vvdi2 procedure..
@PauliusR93 3 ай бұрын
@@haroutiounhalladjian yes i tried. Immo works, car starts. But remote doesnt. Aftermarket key is 315mhz, genuine 868mhz. Is it possible to change mhz on aftermarket key with vvdi2?
@СергейРадченко-з2е 5 ай бұрын
Good afternoon. You have a B+L switch on your stand, what does it mean? Does the Ignition switch allow you to turn on the ignition if there is no ELV connected to the stand?
@haroutiounhalladjian 5 ай бұрын
Good afternoon, no, this switch to turn dash lights on, not for ignition on.
@СергейРадченко-з2е 5 ай бұрын
You have a B+L switch on your stand, what does it mean?
@СергейРадченко-з2е 5 ай бұрын
You can see a high-frequency antenna on the right under the dashboard. Is this the only antenna connected to the stand or were the others not included in the frame?
@haroutiounhalladjian 5 ай бұрын
@@СергейРадченко-з2е yes all the other antennas there
@СергейРадченко-з2е 6 ай бұрын
Good afternoon. Tell me, does your stand contain the driver's door control unit J 386? Or is it possible to simulate opening the driver's door without it?
@haroutiounhalladjian 6 ай бұрын
Hi, yes you need door control unite.
@aleksandrogienko3371 7 ай бұрын
Super
@Mariamardik 7 ай бұрын
🇦🇲👍
@mcbeli85 8 ай бұрын
Please help me, sou have door button…how should I connect it?
@haroutiounhalladjian 8 ай бұрын
Hello, you need elsawin there you can see all your request Diagrams.
@СергейРадченко-з2е Жыл бұрын
Hi Haroutioun HalladjianI'm subscribed to your channel. It contains a lot of useful information, presented in great detail and clearly. It's a shame that there are no new videos on the channel. I have a few questions regarding the stand from the video I want to complete my stand for the PQ 35 platform. Now I can connect 7N0 gateways, NEC dashboards and Micronas panels, BCM 3C0-3C8 units, BCM 5K0 units to it. , ECU blocks EDC16-EDC17. Can I ask you questions about improving the stand? Best regards, Sergei
@haroutiounhalladjian Жыл бұрын
Hello, thanks for your subscribe, yes sure u can ask me…
@electro-progghazi680 Жыл бұрын
👍
@gagaeradze Жыл бұрын
Hello, how can I buy this box or its handmade?
@haroutiounhalladjian Жыл бұрын
Hello, this is my handmade.
@gagaeradze Жыл бұрын
thanks
@salsami6828 Жыл бұрын
Verry good thank you
@dalibordjordjevic9221 Жыл бұрын
Bonjour, comme chercher pin cod?
@marcosangulo2564 Жыл бұрын
Hello, do you think with vvdi2 and my odis online can complete the kessy retrofit in a golf mk7.5 mqb?
@haroutiounhalladjian Жыл бұрын
Hello, i never try your request to know if can done.
@fatahjamal3797 2 жыл бұрын
Hello Please when exchange instrument cluster must adaptation before programming.
@haroutiounhalladjian 2 жыл бұрын
Hello, i don’t understand what do you mean exactly, but about exchanging cluster just read immo data from original and write in new donor cluster by obd, this can done if in both cluster have working keys.
@fatahjamal3797 2 жыл бұрын
@@haroutiounhalladjian thanks for reply yes I do like this but I see the key not found please must I make a new keys
@haroutiounhalladjian 2 жыл бұрын
@@fatahjamal3797 so now can you read immo by obd? Or it sow u need working key? and what diag tool u are using?
@fatahjamal3797 2 жыл бұрын
@@haroutiounhalladjian I use fvdi and I have 2 working keys of the dash I Making it in the table not in the car
@fatahjamal3797 2 жыл бұрын
Hi Please after transfer immo data must detel keys from cluster dooner
@lsimson 2 жыл бұрын
how come there is so many different process for this car? other places showing need to unplug bcm2 and other also saying need elv + eeprom data with programmr because needs sync data. is this really all keys lost you did? at 3:58 where you did the learning. it says to put working key or put no key put on brakes etc to igniton on to read data. so did what key did you put at this step?
@haroutiounhalladjian 2 жыл бұрын
Hello, this is not all key lost video, if you see the title You can see that its for how re-adapt video
@kepaze 2 жыл бұрын
hi, did you connect BCM to this harness?
@haroutiounhalladjian 2 жыл бұрын
Hi, yes
@aleksandrogienko3371 2 жыл бұрын
Super
@martoel 2 жыл бұрын
Hello sir. Its me again. You said in a previous message thst if i hace a used elv i need to use odis. But if i use odis vw will detect thst my chassis does not support kessys then they will no adapt it. Could it be?
@haroutiounhalladjian 2 жыл бұрын
Hello. In this case you must buy full kit, or try connect your kit to another car which was already from factory with keyless function and adapt by odis, all with try..
@mohamedaos6330 2 жыл бұрын
hello friend great work in all your videos i need help i need wiring scheme or pin out to make such as that bench set please help me or send me your e mail for contact thanks
@haroutiounhalladjian 2 жыл бұрын
Hello, friend its hard to explain it how done the connection with me this connection done with me about more then 12 years ago. So try get elsawin software and there it show you all diagrams of wiring out & input connectios.
@glee4012 2 жыл бұрын
Is it possible to adapt a used elv if I can't extract pin/CS of the donor elv ?
@haroutiounhalladjian 2 жыл бұрын
Hello, its not posible to read mcu of this ELV, if you can read mcu so posible manual, for me to done just use odis online.
@aleksandrogienko3371 2 жыл бұрын
Super
@aleksandrogienko3371 2 жыл бұрын
Super
@aleksandrogienko3371 2 жыл бұрын
Super
@carkeys121 2 жыл бұрын
Beautifully done…thank you for sharing
@salaheddinemountassiridris2855 2 жыл бұрын
how can i contact you
@haroutiounhalladjian 2 жыл бұрын
instagram.com/vag_group_center_?r=nametag U can contact me on Instagram
@salaheddinemountassiridris2855 2 жыл бұрын
@@haroutiounhalladjian hi the link doesn't work
@haroutiounhalladjian 2 жыл бұрын
Go instagram vag_group_center its the same logo that is here
@khalidsaadaldin9094 3 жыл бұрын
Why bother upload video if you won't show us how to connect the instrument to vvdi2 and ELV !!
@alexanderl.2861 3 жыл бұрын
Hello , how to adopt new virgin ELV , what is pin and CS for new one ? Now brand new ELV not so expencive .
@haroutiounhalladjian 3 жыл бұрын
Hello. I neve try brand new ELV adapt, try if elv let you write manual immo info after you can adapt.
@alexanderl.2861 3 жыл бұрын
Just try to teach NEW virgin ELV with VVDI2 , but no luck!! Can't login, try to write manual all 0000 then try to write all 11111 , than try to write original CS and PIN but nothing. Seems to me that the new virgin is somehow locked or completely blank. Still need help!!
@qtechautolabsnigeria5201 3 жыл бұрын
Hello bro. I have the case where keys were ordered by VIN for the purpose of a spare. Someone cloned original key and now both does not work on the car. Dash says key not in range. What solutions are available? I have vvdi2 full version. My car is a golf6. You can reach me via [email protected] or WhatsApp on +2347037242797.
@vadimgulmalov3416 3 жыл бұрын
I write transponder passat cc 2013 keyless go id 46 by reading comfort module 95320, but i can not write remote control. How can i do this? Have keytool plus.
@haroutiounhalladjian 3 жыл бұрын
Hello. It must be your remote key new keyless function to done. You can’t do it as programe trsnsponder and after program the remote. When you prepare the remote key after write back to CM and after you can by vcds continue the adapting procedure.
@vadimgulmalov3416 3 жыл бұрын
@@haroutiounhalladjian Thanks bro🤝
@vadimgulmalov3416 3 жыл бұрын
@@haroutiounhalladjian friend, i have vvdi2, but it can not writing remote, transponder working, but remote not
@0beed0 3 жыл бұрын
Hey , nice work and thank you for the videos. Does this work for EDC16U1 over obd as well ?
@haroutiounhalladjian 3 жыл бұрын
Hello.Thanks for you, i just work on petrol ecus on Vag Group, so i never try it, but i maybe yes.
@0beed0 3 жыл бұрын
@@haroutiounhalladjian thank you for the quick response. It fail for me so that's why I asked if someone else did it but will go over BDM. Cheers.
@hakimcatalino7631 3 жыл бұрын
Hello, can you tell us what is the connection of the four of instruments? Thank you
@hayderjaderi4163 3 жыл бұрын
How to Program 2013 VW passat id46 Remote
@vadimgulmalov3416 3 жыл бұрын
You could learn how to record this remote? Passat CC keyless id 46
@AkramTechTV 3 жыл бұрын
Hi, It's Possible Having just pinout for kessy passat . ? thanks in advance
@haroutiounhalladjian 3 жыл бұрын
Hello, see who save ElsaWin there you can see or found what u wish.
@adamaddam1263 3 жыл бұрын
Hello How can you find out the CS and PIN of the new ELV used
@haroutiounhalladjian 3 жыл бұрын
Hello, i get elv with engine ecu from the same car, and i read from engine ecu the CS + pin to can adapt the elv.
@keyinminutes3211 3 жыл бұрын
I tried reading immo data using VVDI2 today on MQB and said it couldn’t do it. Everything I read said you had to use VAG OBD Helper to read immo data then use that file to make key in VVDI2? Is that not correct?
@haroutiounhalladjian 3 жыл бұрын
Hello. Yes it is correct
@keyinminutes3211 3 жыл бұрын
@@haroutiounhalladjian well I’ve since found another way....
@keyinminutes3211 3 жыл бұрын
@@haroutiounhalladjian IM608 did it all without needing anything else on 2020 VW Atlas
@aspalrawat9736 3 жыл бұрын
Dear please send me your whatapp or Skype contact number
@dubcreations3540 3 жыл бұрын
Hi, what’s the cost of this program? Is there a compadable inexpensive product to also program? Fvdi or svdi?
@haroutiounhalladjian 3 жыл бұрын
Hello, best diag tool for vag avdi and vvdi2, no idea about the cost.
@ecarruda 3 жыл бұрын
Can i do 2 questions? Do you have ecu on your boxy? Why did you decide to let 00 on the byte 7th? isn’t mk6 has support to this?
@iichel89 3 жыл бұрын
Hi there, I was wondering if you have some information regarding the adaptation of the 05 Kessy module. Can you learn a used 5K0 959 434 with VVDI2?
@haroutiounhalladjian 3 жыл бұрын
Hello. VAG-MM007 this tool can help you.
@iichel89 3 жыл бұрын
@@haroutiounhalladjian that's great, I actually own this tool. Could you tell me a bit more about the procedure? I read some vague posts about it. My guess would be to connect the used module, learn keys, do a firmware refresh with the mm007 and learn keys again.
@ecarruda 3 жыл бұрын
Can I ask for one tip? Do you have ECU inside of the box?
@AkramTechTV 3 жыл бұрын
Hi Haroutioun, i have a question Please, when i syncronise my ELV (Second Hand by load Data of ELV) With BCM, the syncronisation was done succesfully, and in the first time when i put the ignition ON, the ELV switch to postion unlock, and the Safe has removed from the dash, but when i try the remove the key from ignition, the ELV don't Lock. have you any idea about that please.
@AkramTechTV 3 жыл бұрын
Hi Haroutioum, Can you please make a vidéo to how can adapt Used ELV to BCM2 Thanks in Advance
@adamaddam1263 3 жыл бұрын
Thanks Haroutioun for the video. a question the ECU is new or used. thanks
@haroutiounhalladjian 3 жыл бұрын
Hello.its used
@motochiptuning 3 жыл бұрын
You didnt reset cluster before add-learn key as you said
@thesmartguy3523 3 жыл бұрын
Hey man, awesome video - if i may, how did you make this box ? it's awesome, could you guide me how ?
@haroutiounhalladjian 3 жыл бұрын
Hello, thanks for your kind words, Dear its difficult to let you know cause its hard, sorry...
@AkramTechTV 4 жыл бұрын
Hello, i need your help if possible pls. i try the connect on bench with BCM2 with audi Wiring Harness but when i choose "Read BCM2 Data by VVDI2 i have this message "Please Check Connection with car and make sure switch on the car". FYI, i can read it with "Diagnostic Unit" Thanks in advance == kzbin.info/www/bejne/rqW7h6Njaq95Z8k
@AkramTechTV 4 жыл бұрын
Check this Vidéo kzbin.info/www/bejne/rqW7h6Njaq95Z8k
@haroutiounhalladjian 4 жыл бұрын
Hello. I don’t see on your system it show ignition on, must instrument cluster lights show us on when you insert the remote key to ignition position, for that you can’t read data.
@AkramTechTV 4 жыл бұрын
@@haroutiounhalladjian in my system, the key in ignition is not added yet.
@AkramTechTV 4 жыл бұрын
Hi, Can you let me now wich Ref of BCM2 ELV & ECU you use . ? i need the make bench test platform Thanks
@haroutiounhalladjian 4 жыл бұрын
Hello, what did you mean Ref of ???
@AkramTechTV 4 жыл бұрын
@@haroutiounhalladjian i mean number or reference of equipment exemple bosh edc17c14
@haroutiounhalladjian 4 жыл бұрын
Hello, no its MED17.1.6
@AkramTechTV 4 жыл бұрын
@@haroutiounhalladjian BCM2 and Elv ?
@haroutiounhalladjian 4 жыл бұрын
@@AkramTechTV all are for petrol system not for edc17
@GOMAND-keys4you 4 жыл бұрын
good film
@jorgeescobar1636 4 жыл бұрын
What programmer too use?
@haroutiounhalladjian 4 жыл бұрын
Hello. For Mpps
@tomking3942 4 жыл бұрын
Can you show how you get the service mode with vvdi2?
@haroutiounhalladjian 4 жыл бұрын
Tom King Hello, there is a written in vvdi2, follow the steps you can do it.