Been trying to use my mikrotik router purchased months ago and never got to work right, so many tutorials seen but all with different criteria making things not to work. In your channel I found everything to get the router up and running. Thank you very much!

🎉 Thank you very much, I managed to setup my Hap AX3. I had to wait a lot after the 2.4 ghz WiFi is configured. The router took about 10 minutes to be visible again. I made the whole process 3 times. And eventually gave up, because the router wasn’t visible. But after a hefty wait, it was all good, I was able to configure the bridge and the ports. Thanks (a new subscriber ;) )

how much for set up like this for my mikrotik ccr2004 v7.9?

Hello, does procesor i5 work with BIOS version 1.10 or i should update to 1.12 ?

Ofter upgrade 30nimds ofter laptop showdown problem 😢😢

Please help - what is DST (destination) here and what is SRC (source) - I mean source is remote machine and destination is my router or how it works guys ? And please I beg you - explain what is Tx rate and Rx rate ?

Your content saved me, you deserve a sub

Thank you. It work`s/

Hello Sir, I hope your doing well, I want to set the time restriction in MicroTik if it is possible to set the time restriction, Ex: my internet work from 7:am up to 4pm

Hi, i have a question. I have mikrotik LHG 5 an antenna that looks like a dish and a small mikrotik router sxtsq 5ac. My question is, can i connect them with each other as a bridge and station bridge. I tried, but LHG 5 is not scanning signals of sxtsq whichbis small router.

does upgrads harm the configuration of internet on mikrotik or its not problem?

Will be great to show how to set speed limitation for guest network

not clear on the ip target.

on hap AX3, after ap bridge/Station Pseudobridge connect to the WiFi, is it possible to create your own local network with DHCP server, allow all devices connect to Mikrotik only? hap AX3 become a Repeater (wifi interfaces as Internet gateway) & also running as Router mode as the same time?

hello guys. i have 2 two dhcp configured now I'm facing this error... "dhcp warning dhcp1 offering lease without success " help please

I told my wife I am gonna start cutting my own hair.. Why pay 45$ ..and up. When you already going bald….

Everything has been fine but i cant connect to my userman on my hac3

Thank you so much for this video. I managed to successfully connect to my network the first time. After being online for about 20 minutes, I manually dropped the connection and when I re-try to connect again, my windows VPN client now displays the message: "The remote connection was not made because the attempted VPN tunnels failed. The VPN server might be unreachable. If this connection is attempting to use an L2TP/IPsec tunnel, the security parameters required for IPsec negotiation might not be configured properly." What could the issue be? I have made no new configs to the Mikrotik RB2011UIAS2HNDIN device since. Thank you!

Can you share video for point to multipoint

Thank just done setting up mine

Lenovo 20306 board cpu upgrade possible (AMD) ?

Can you bond 8 ports into one link using microtik ccr1036

Howzit going? I have a client that has a Mikrotik and behind that mikrotik an AP has reset to default how do I find that AP and then how to I access it to reconfigure

That video solved my problem, I have AX3 and mAP 2nD and could not connect them by WiFi, so AP connected devices would see core router devices, tried Setup Repeater, and this video at last solved my problem. Now everything works, but was not on Bridge moment and DHCP Client did not received IP, solution was to wait some more time and finally it received IP and everything started working, Big thanks!

Good morning, I did it the same way as in your video with the difference that I have different ip address values. I think I should have it set up correctly. The only thing that bothers me is whether it works as it should. When I look into IP/Firewall/Nat - here I look at the created 4 port forwarding rules for one online game, so the first two rules are ( for port: 27015 and 27036 ) the other rules are for the TCP protocol and the others are the UDP protocol ( for the port: 27015 and 27031-27036 ) so I look at it and there is no data flowing at all. I still have 0 B in the Bytes column, so I doubt port forwarding is working for me :(

yeah but how to set up mesh????? so there is no roaming

Devices that try to connect to the vlan are not getting an IP address please advise

the regex didn't work, it doesn't match any of those, so no package were marked

thank you sir!

nice!

Sir, what transistor type and label is Q8 on the APC BACK-UPS 650CS Model? Mine got burnt and I don't know the replacement type. Alternatively, where can I download a circuit diagram or wiring for this UPS

pseudo. this was the thing. I tried a lot and didn’t work. but you are the best man, pseudo was the thing. I learned from yours and made my own. I took the internet from 5g network and created a 2.4g new network.

YOU ROCK!!!! Seriously, I've watch countless, countless Mikrotik videos to do exactly this! I followed their instructions exactly & NONE of them worked - oh yes you could connect to the wifi repeater but you couldn't access the internet. Your video is easy to follow plus you give additional info/explanations on what the different selections are. Your an excellent teacher! Truelly a Master! Many thanks, much appreciated 🙌🙌🙏

You are really trying thank you so much

सर् नमस्ते, मेरा UPS अचानक लाइट जाने के बाद में काम नहीं करता, खासकर जब मैं Adobe Premiere Pro जैसे भारी सॉफ्टवेयर चला रहा होता हूँ। इससे मेरा कंप्यूटर अचानक बंद हो जाता है और प्रोजेक्ट्स क्रैश हो जाते हैं। लेकिन जब मैं एडोब प्रीमियर प्रो नहीं चलता हूं यानी कि सामान्य गतिविधि कंप्यूटर में करता हूं तब मेरा कंप्यूटर अपने आप बंद नहीं होता है जब कुछ देर तक चलता है लाइट भगाने के बाद भी। मेरा UPS मॉडल FP 1000 (PPF6000618) है जिसकी क्षमता 1000VA/600W है। क्या यह UPS मेरे सिस्टम के लिए पर्याप्त है या मुझे इससे बड़ी क्षमता का UPS लेना चाहिए? या फिर कोई और समस्या हो सकती है जिसे मुझे चेक करना चाहिए? आपकी सहायता के लिए धन्यवाद।

Need and updated video using ros7

Long time not posting, whats up? we need more content.

It does not work for me (win10 client connects but says "no internet"), even when I bridge both wlan0 and wlan1, as another poster suggested. At 3:55 , my setup (from quickset). has the value "station pseudobridge" not "station bridge". Any ideas? UPDATE: changing to "station bridge" is definitely wrong -- the whole connection to the upstream wifi disappears (as seen in quickset). I am on ROS 7.13 version. UPDATE2: Got it to work. It may have been a DNS setup problem, not sure what I did to fix it.

How many km captured wifi

A u from Jamaica

I find this video to cause even more confusion than what existed before coming here for clarity. Things are mentioned as part of the video which have not been included in the video prior to being mentioned and are mentioned in a manner as if they were covered in the video prior to being mentioned. e.g Peering Queue. I find the language very confusing ... clearly not the creators first language. Will look for another video on this subject as I do not feel this video helped at all. Rather I am further away from where I was. Ongoing use of the incorrect terminology seems to indicate to me that the creator is not comfortable or familiar with the subject matter ... things keep being refereed to in hind-sight which completely breaks the flow of the video IMHO. This seems unscripted and impromptu. Please, if your going to continue making videos, have a script and rehearse before you create the video 🙏

if i use a network cable from my main router connect to my second router how to make my second router as a repeater?

Even after 6 years your videos help a clear and concise explanation Hats off to you boss It would be an honor to be your student respect from Senegal

Thanks a lot! I was just wondering how I can download a file to my local machine and was looking for a download button or something. It's so simple to just drag and drop the file to my desktop, but i didn't try it until I saw it in your video! ;-)

Quality of videos is very low

Can this tutorial be used for hEX S? Thanks

Thanks, I noticed There is improving in communities

It's only working on port the wireless visibility is off can't see it 😢

I would appreciate if you would show how can i connect to my master router via Cable and not WLAN1 !? I want to have a bridge acess point connected via cable. You didn't show it.

really work! GJ MAN!