No Worries Media

Пікірлер

@القيصر-ن8و 10 күн бұрын

Please what is the part number that was changed?

@victorflores7298 Ай бұрын

Hey, I was just wondering if you work on the car consistently nonstop. What’s an estimate time frame of how long it will take to get done??

@Slow__supra 4 ай бұрын

Where did you get this bushings from and how are you finding them

@upperclasscee4970 3 ай бұрын

Autozone has them just bought one today for $50

@DataBoy1911 4 ай бұрын

Was this causing a rattle noise on cold start ?

@CombatJJ 6 күн бұрын

What did you end up finding out bro?

@petesmith9472 4 ай бұрын

WARNING DO NOT USE PHILLIPS HEAD SCREWDRIVERS for this job. Use the correct JIS Japanese Industrial Standard bits and screwdrivers. Otherwise you will cam out the screws and have to resort to hacksaw, just like what happened here. If you look at the head you will see a dot on it.

@GsS7V 5 ай бұрын

Do you have a link to all parts ordered for the swap

@that.97aristo 6 ай бұрын

Nothing tops an Aristo

@jacobmorgan1604 6 ай бұрын

Are you using a w55 trans ?

@phatmiike 6 ай бұрын

I need the link to this part ASAP 😫

@oSIXO. 7 ай бұрын

I got code p1128 on my 98 gs300, i went into limp mode first code was p1121, replaced the apps and tps, went back into limp mode but only code is p1128 now!(throttle control motor lock) im thinking of just replacing the throttle body motor too like in your video💪🏽

@jvella120 2 ай бұрын

Hey I'm having the same issue, did you manage to fix it pls?

@aros007z 7 ай бұрын

Awesomeness

@nextchantskatez2254 7 ай бұрын

Need the link for the 2 to 1 connector for the handbrake cable I can’t find it 😢

@noworriesmedia9778 7 ай бұрын

It comes off of an sc300, I got mine from a junk yard

@nextchantskatez2254 7 ай бұрын

@@noworriesmedia9778 thanks just got the hand break , cable and the connector your a life saver 🙏

@lucidsnowwz9630 8 ай бұрын

What’s the name of the company that sells the hand brake and clutch kit?

@noworriesmedia9778 7 ай бұрын

Heatlighting Speedshop!

@baconpranks6005 8 ай бұрын

Im confused as to how your wheel fell off. Camber bolts should be there incase the bushings go. Did you just ignore all signs till it was too late or am i missing something.

@MattAyala-ux5bd 8 ай бұрын

I wanna turbo and boost mine

@kenrocker7427 8 ай бұрын

How did you wiggle the starter out after unbolting it?

@2jzgenat 10 ай бұрын

Is that car lhd or rhd? Mine is rhd so "driver side" and "passenger" side mean different things for me😂

@SRT8JOEY 10 ай бұрын

Fuck yeah! 🔥 video

@user-cn3rq1be5h 10 ай бұрын

This video was funny af… and helpful

@Allen.Saylor Жыл бұрын

What trans are you running?

@luigi3286 Жыл бұрын

What’s the symptoms the when the knuckle bushings is broke ? Thanks

@AngelHernandez-ny6dg Жыл бұрын

Alot of vibration at around 60-80

@luigi3286 Жыл бұрын

@@AngelHernandez-ny6dg I have a problem at the rear suspension l replaced the upper control arm , shocks, sway bar links and saw bar bushings and it’s still making a noise ,,, I’m thinking that it could be the lower control arm , but let me tell you ,,, the lower control arm has two bushings , one bushing is in the control arm but the other bushing inside of the knuckle 🤦‍♂️ meaning I would have to replace the bushing from the knuckle so I can use the new control arm ! That’s crazy because if I don’t replace the bushing I will have to replace the knuckle that you can only find it at the dealer:( I found a website where I was able to find the bushing alone for knuckles :)

@ATLballer Жыл бұрын

time for me to get off the net.....i saw a 300 with a brush guard

@BillyBobDingledorf Жыл бұрын

Funny how you get a ticket for that, but motorcycles can get away with shattering windows. Why is your headliner so dirty?

@Alexandurr Жыл бұрын

Bro is Straight vibes

@pimpsahan55 Жыл бұрын

is there way to not to go to state ref and tell judge or pay off?? cuz mine is welded straight pipe! :(

@likeable6906 6 ай бұрын

Any update?

@Tony-tk4ht Жыл бұрын

i like my ride height but how do i get it to have less travel because i rub

@damonmelendez856 Жыл бұрын

How are the headlights holding up after a year? I need to do the same, mine look like asssz right now…

@almutazjan5679 Жыл бұрын

What wheels are those they look sick! And what’s the offset and size please?

@DTJzx110 Жыл бұрын

Is it this straight forward for a 1jz gte vvti?

@Stackinchips023 Жыл бұрын

Bump

@Tyhamilton0 6 ай бұрын

@@Stackinchips023yeah mate, just take off the coil cover and it’s all the same

@TelmenBudsuren 5 ай бұрын

yes, 46010 vvti solenoid same for all ge and gte

@whitesoxchigaco Жыл бұрын

Hey bro so the shirt wont catch fire or anything ?

@ev.chern21 Жыл бұрын

у меня такая же беда

@bennybarri2524 Жыл бұрын

Trying to sell my g35 for a gs lol

@dpm8763 Жыл бұрын

What is hub centric on those rims ?

@dpm8763 Жыл бұрын

The diameter

@travisstamp7428 Жыл бұрын

Just shim the fender by the door, for a widened look

@denzelmason8021 Жыл бұрын

When that part is bad would your rear end give u a lil sway if u hit a depression too fast

@collinkeller1498 11 ай бұрын

were u asking this same question on an is300 video

@denzelmason8021 11 ай бұрын

Possibly

@reddmann1168 Жыл бұрын

Bro keep going

@NykoNintendo Жыл бұрын

Hey man question, when you do this does this need to be retuned to the ecu knows its a manual or it doesn't need it at all and it like a go and play?

@noworriesmedia9778 Жыл бұрын

You can install an ATEMU which I really recommend but you don't need it. I used the car for over a year with everything stock

@TheAutoShoppe1 Жыл бұрын

Did you have to cut the clutch master adjustment rod

@noworriesmedia9778 Жыл бұрын

No it fit right in and I adjusted it later on to get the pedal placed better

@CorneliusVeee Жыл бұрын

Hey for the drive shaft which size bolt pattern did you get. the small or large?

@noworriesmedia9778 Жыл бұрын

I honestly don't remember but it's pretty easy to measure, therenis a big size difference between small and large so it's worth it to go underneath the car and measure it

@realweston Жыл бұрын

Congratulations on getting out to the track my G! It’s a blast isn’t it?!

@noworriesmedia9778 Жыл бұрын

Yeah it's so awesome lol, I really want to go back

@lelandcoberley8723 Жыл бұрын

Hell yeah it's worth it!

@alec3048 Жыл бұрын

Which brand poly bushings are those?

@Yoogie Жыл бұрын

i’ve been having problems with my 99 gs300 it was having trouble start and then fully died so i went to charge battery at autozone then came back put it in and started right up but then day later wouldn’t start so i got a new battery and put it in and still no crank no start any ideas before i spill more money into my car? love the vids btw

@MattAyala-ux5bd 7 ай бұрын

Check your alternator

@joshuaflores4346 Жыл бұрын

Question did they check under your hood also I have motordyne resonated test pipes will they check under for that if I manage to pass noise inspection

@HOTRODRICO Жыл бұрын

so the two most difficult parts weren't shown, lots of help lol (not)

@MrLazlness Жыл бұрын

I shoved a cat into my exhaust and it worked lol

@Luis4serio Жыл бұрын

What do you mean by that? I recently got a loud exhaust and need help!

@Zarqus99 7 ай бұрын

I follow this@@Luis4serio

@Addrrall Жыл бұрын

Thank you for this, tried to get an alignment the other day come to find out a bunch of suspension parts are too worn to hold alignment apparently including the bushings so this is probably saving me a couple hundred

@syntrexfpv1347 Жыл бұрын

Idk putting something so flammable inside your exhaust seems sus to me.

@Joe-ey8nw 2 жыл бұрын

What wheels are those ?

@josiahkauhane9323 2 жыл бұрын

Is there a reason u didn’t cut a lot of those wires such as SLT+, SLT-, SLU+,SLU-,SLN+,SLN-, N,4,3??? Also why did u wire in L into the ATEMU instead of 2???? Just wondering! I should be doing mine this weekend and I just want to understand! Thank you!

@noworriesmedia9778 2 жыл бұрын

Hmu on ig @noworriescc_

Ең жақсы KZbin

Пікірлер