Turn the steering wheel right after unfastening all of the bolts. There’ll be enough clearance to take out the reservoir assembly.
@americanpatriot583610 күн бұрын
Thank you. Great video!!!
@luzvillalvazo621411 күн бұрын
i will be putting on my tire on my own because my family wont help me unless they get 500 dollers in hand.
@pablolopezmaya265116 күн бұрын
Thank you very much
@marcelrivas367625 күн бұрын
Bravo very good thanks of my country argentina ..in my country no mantence this machine the service not accept "homelite"
@lorenzoferrara8652Ай бұрын
Great mate! Is there a process to use this method for removing tyres?
@MuddyDrivewayProductionsАй бұрын
Nope, just have to do it the old way. It would be nice though. Thanks for watching!
@silverdragontaylir8252Ай бұрын
Does alternator have (directional clutch)
@terrorhorrorcryptidАй бұрын
what type of little hook thing is he using in thr video????
@applecrisp2Ай бұрын
I’m having the same issue as you did with your first controller. I can’t seem to get the wheel to spin for step 3, the motor calibration step, the bike just continually beeps at me and the wheel doesn’t spin. Kick stand is up, check the tilt sensor and that’s all good. I’m stumped.
@MuddyDrivewayProductionsАй бұрын
Yeah, I checked all connectors by back probing and making sure it had continuity but still didn't work. Finally I just scheduled a tuning session with Ian and he determined that something was wrong. Had me send it in to GritShift. I ended up getting a new one. I hope you figure it out.
@TE_2StrokeАй бұрын
Coincidentally 4:33 that was us 🤣
@MuddyDrivewayProductionsАй бұрын
Dang, I had no idea lol. I shall see you again. I'm trying to get my daughter to ride more technical trails. Aloha and take care
@TE_2StrokeАй бұрын
I enjoyed the C course, was perfect for my daughter to learn on her surron 👌🏽.
@vweeks181Ай бұрын
You so awesome thanks homie
@JesrockrАй бұрын
You can use the lid off a can of Zyns as a cheap seal driver. I made a video on it! Definitely need to go slow and make sure it’s going in straight
@jonathonking5985Ай бұрын
I have the same type set up 98 Tacoma 3.4 4x4 5 speed and my ball joints came apart and tore my axle out of case and rolled my 31inch tire under my passenger side door and fender ! This video just helped me tremendously on how to remove the other half of axle
@christywilliams6270Ай бұрын
Best video on replacing door handle, thank you
@coppermaransreuploadervideoАй бұрын
0:37 Rooster crows
@antoniobaskerville68232 ай бұрын
Great Job ❤
@wyattthurston90512 ай бұрын
Thank you so much!
@foscamramos73902 ай бұрын
split washer or flat washer goes on first? I've seen both ways
@robertreigman13352 ай бұрын
Thankyou very much. This vid is a great help.
@ColtonSmith-vq8tk2 ай бұрын
Why did the kid sound like ike from south park
@gersonvargas38592 ай бұрын
Question, why didn't it have a axle nut?
@wouse17192 ай бұрын
Aye bro what did you take off to get to the head gasket ? Like the stuff on top if it🙏🏽 studying for a job coming up this Tuesday 🙏🏽🙏🏽
@MuddyDrivewayProductions2 ай бұрын
Sorry for the late reply. It was just the Valve Cover. Spark plug wires and intake and some wires attached. In order to get to the Head Gasket you would need to remove the Head.
@subscribetovadorcreations2 ай бұрын
thank you dad
@quintinchrist3962 ай бұрын
Can you just wire nut it?
@quintinchrist3962 ай бұрын
Why don’t you jsuy wire but it?
@ronaldschronce48752 ай бұрын
I checked this to see any tips as to how to get this off the EASY way. After watching I have decided I don't really need to change it out, just thought I did. I now carry a $5 squeegee and a bottle of cleaner.
@hatefulbastard69782 ай бұрын
I don't know if you're still active here but I'm about to do this on my 1st gen and just wanted to say mahalo.
@chrisc50282 ай бұрын
1 1/16
@kiki93732 ай бұрын
Does this work the same for the manual transmission version?
@MuddyDrivewayProductions2 ай бұрын
I didn’t know they had a manual. Should be same idea.
@71502852 ай бұрын
Just curious. People say the diff can suck in water when driving through deep water if the breather is completely submerged underwater. From your experience in your vid testing the breather's function, do you think it is possible?? Or is the breather only a one way valve that can only let pressure out of the diff. And not let air or water back into the diff???
@MuddyDrivewayProductions2 ай бұрын
I’m pretty sure it will suck in water. A lot of people that off road run long rubber lines up high
@71502852 ай бұрын
@MuddyDrivewayProductions I know it is possible. But still unlikely right??
@71502852 ай бұрын
@MuddyDrivewayProductions you can blow yes. But can you suck air through the breather though????
@MuddyDrivewayProductions2 ай бұрын
I have gone through mud and salt water this could have been the reason that I had to change my axle seals. If you go through a lot of water just to be safe get a breather kit
@71502852 ай бұрын
@MuddyDrivewayProductions yes, I will think about it. Just curious. Were you able to suck air through the breather though??? I'm wondering how does the breather work. You can only blow and not suck air right?? It is a one way valve after all right?
@HarleyQuinn-lu3ee3 ай бұрын
Worked!!! Your a legend
@floydrturbo13 ай бұрын
Straight to the point instructions. Thank you for taking the time to record, edit, and produce this excellent video. Great camera work, narration, and editing. The only thing I would add was where you got the product and who manufactured it. Otherwise nice work and especially LIKE NO BACKGROUND MUSIC. 👏👏👍👍
@vancheeliu67943 ай бұрын
How to replace the small DRL bulb ( 5 watts) that is at the upper outside corner of the high beam ?
@MuddyDrivewayProductions3 ай бұрын
Sorry I no longer have this vehicle. It should be the same way.
@vancheeliu67943 ай бұрын
The DRL bulb of 2002 Camry (Japan manufactured) is at the upper inside corner of the low beam. Keep the cable harness attached, the DRL bulb can be removed by twisting the connector housing counter-clockwise.
@garydiamond60783 ай бұрын
OK if you looking at this video don't do it his way, leave the lock still on the cable, next pull it out, the tab on the lock that holds the lock in place is very hard to line up. Look to the left in from of where that 10 mm bolt goes on the door you will see a black plastic round plug remove it, now you got a one inch hole to reach that bolt don't use a tiny set use a full 3/8 set and put the 10 mm bolt in first WITH THE LOCK TAB OFF, THEN REMOVE IT AND DO IT AGAIN WITH THE LOCK TAB THAT SUCKS IN THE DOOR HANDLE IN THE RIGHT SPOT.
@franciscocollins67153 ай бұрын
I always take wire feed from the wire and slip it through the I make a handle spin the pool no tool
@mankhalasiri58803 ай бұрын
Excellent video
@haaziqadryaan12773 ай бұрын
Tq...it's work 😊
@Grumm_tnt3 ай бұрын
Im thinking on lowering the seat, extending the shock with the warp 9, and extending the swing arm, and i believe it will look meaner
@kalaikealohi43614 ай бұрын
Mean trails. Wea u from baddah
@MuddyDrivewayProductions4 ай бұрын
Hey Kalai, this was on Oahu. Shoots
@bangolufsen86874 ай бұрын
The moment he removed the radiator cap. Nice job sir. Such a natural review on how to work in cars. Enjoyed it.
@pward87234 ай бұрын
Too fasr
@abzdidit4 ай бұрын
what’s the link of the fender ?
@MuddyDrivewayProductions4 ай бұрын
Link amzn.to/4cX7AVW FYI I have upgraded a few times after this fender. Thanks for watching!
@teawinters68094 ай бұрын
Thank u
@thomasmondeaux77984 ай бұрын
Great video! What kind of shop did you use to get the new bearings pressed in?
@MuddyDrivewayProductions4 ай бұрын
I went to an Automotive shop. You can go to any shop that has a press. Just call around and ask.
@chrisanderson91574 ай бұрын
Excellent video!
@goodridehawaii4 ай бұрын
Heck yea bro! Charge um🔨🔨🔨
@ATownPyro4 ай бұрын
What’s that hill called?
@TE_2Stroke4 ай бұрын
The funnest conditions to ride hands down. Nice vid 🤘🏽
@LaikasFriend4 ай бұрын
Appreciate this man! Got a rice cooker for college and am using it for the first time, excited to make dinner!
@goodridehawaii4 ай бұрын
Woo buddy! Thats a solid fender!🤘🏼
@MuddyDrivewayProductions4 ай бұрын
It’s pretty dang awesome. I hope this one keeps the color for a while. 🤙🤙