Sweet MiMi Creations

Пікірлер

@bestmomc3935 7 ай бұрын

nice

@JenniferD2016 10 ай бұрын

Do you just go until the picture.comes though the other side of the paper

@sweetmimicreations8158 10 ай бұрын

Yes pretty much I do watch for that . When it’s colorful yes . Be careful and make sure you move your heat gun back and forth where it doesn’t burn

@aliciaantrobus6912 Жыл бұрын

I’ve been doing everything the same. Even sublimation printing paper and all I do is burn the heat paper 😢

@sweetmimicreations8158 Жыл бұрын

Try holding your heat gun away from the cup . And don’t hold it in place make sure you go back and forth with the heat gun .

@summerrose2853 Жыл бұрын

New subscriber That came out perfect can't wait to try

@lilpuppetthehater9347 Жыл бұрын

What type of paper do you print on

@barbra429 Жыл бұрын

Are there any fumes

@sweetmimicreations8158 Жыл бұрын

No there is not any fumes . I suggest you do it on a solid surface and do t have anything around that can melt due to the high heat

@buteful25 Жыл бұрын

Thank you so much for this. My heat press is acting up and I have orders to fill. Going to give it a try.

@sweetmimicreations8158 Жыл бұрын

It does work just make sure you do it long enough where the entire image is on .

@carlenewilliams4465 Жыл бұрын

Loooooks awesome

@sweetmimicreations8158 Жыл бұрын

Thank you

@valeriehofmann2615 Жыл бұрын

I love your shirt!

@timleyshelton2953 Жыл бұрын

You can't put nails in the ones you bake paper on, you need to put an eye screw in the top, and your vent clips don't put the clip in till after you bake, I learned that the hard way

@tamikaleggett7530 2 жыл бұрын

Nicely done and thank you

@sweetmimicreations8158 2 жыл бұрын

Your most welcome anytime

@cathyintally 2 жыл бұрын

Can you put several cups in the oven on high heat?

@rraley55 2 жыл бұрын

How long do you apply the heat gun? ty

@rraley55 2 жыл бұрын

also do you have to do your image with a sublimation printer?

@sweetmimicreations8158 2 жыл бұрын

Yes you have to use a sublimation printer to print your image. However they are made for sublimation it that doesn’t mean you have to use sublimation. You can always put vinyl on them as well.

@sweetmimicreations8158 2 жыл бұрын

Also with the heat gun I just look at the picture and try and see if the image is heated enough. Like 10 minutes

@sissymunoz71 2 жыл бұрын

Can you do a pen with a heat gun

@sweetmimicreations8158 2 жыл бұрын

Yes you absolutely can

@abbiebabie77 2 жыл бұрын

Thank you!

@jarvisjohnson3632 2 жыл бұрын

What temperature is the gun set on?

@sweetmimicreations8158 2 жыл бұрын

This gun has no temp setting but it gets pretty hot

@-safi-kreez 2 жыл бұрын

Nics

@tracystark7201 2 жыл бұрын

That’s a great hack for someone without any other heat source thank u for shareing

@kimberlyredding5243 2 жыл бұрын

Do you not use candle oils?

@sweetmimicreations8158 2 жыл бұрын

Yes I do from the flaming candle company

@erwinbucks658 2 жыл бұрын

ρяσмσѕм ❣️

@omgenetv2311 2 жыл бұрын

Great video! Keep it up 👍

@aNewNarrativeTV 2 жыл бұрын

How long did you have to use the heat gun to ensure it’s completely sublimated?

@sweetmimicreations8158 2 жыл бұрын

I would say about 10 minutes or so. It will take longer. I will always look u see a piece and see how it looks

@loreenalabad300 2 жыл бұрын

What do you package them in

@sweetmimicreations8158 2 жыл бұрын

I put them in food sealable bags you can get from Amazon to gold the scent

@shannonblackman467 2 жыл бұрын

Have a 1500 watt heat gun...is that wattage high enough?

@sweetmimicreations8158 2 жыл бұрын

Yes it will work it may take a little longer but it will work

@sanbonner4183 2 жыл бұрын

Good afternoon, I have a question please. My beads are sticking to my mold, what should I do?

@sweetmimicreations8158 2 жыл бұрын

If your using the metal molds yes I have an awful problem with them sticking to the sides. Try using silicone molds if you can. But try putting some kind of cooking oil on the inside of the metal ones

@sanbonner4183 2 жыл бұрын

@@sweetmimicreations8158 thank you

@sanbonner4183 2 жыл бұрын

What type of paper did you us to print your Jeep?

@sweetmimicreations8158 2 жыл бұрын

I used card stock

@sanbonner4183 2 жыл бұрын

Thank you. Enjoyed your video.

@sweetmimicreations8158 2 жыл бұрын

@@sanbonner4183 thank you .

@clarebarton9694 2 жыл бұрын

hi how long did you hold the heat gun on the mug please? thanks clare xx

@sweetmimicreations8158 2 жыл бұрын

I go back and forth. There no certain time. If it’s a bright image I go by the color of the paper . The image transfers when it’s hot so when the image is first out in you see white and when you start heating it up the image comes through the paper. That’s kinda what I go by. Sorry hope that helps

@courtneyrushing-davis5761 2 жыл бұрын

You taught me something new today. I have tons of those lighters. I’ll be using my heat gun for sure

@jenessanorris4989 2 жыл бұрын

Thank you I just bought the ET15000 and I'm ready to get started but wanted to watch some videos on applying the print to the tumblers .... your Tumbler came out very nicely keep up the great work and I will be looking out for more of your videos

@sweetmimicreations8158 2 жыл бұрын

I can do a video on applying the print I’m sublimating on Wednesday in my oven I will let you know when I have it posted if that helps

@jordanwilson3379 2 жыл бұрын

Maybe I missed it.. what paper do you use? I've only used starcraft paper

@sweetmimicreations8158 2 жыл бұрын

I use ASUb from Amazon

@brittnynelson1878 2 жыл бұрын

That turned out nicely! I’m watching your video to learn how to sublimate with a heat gun. I’m hoping mine turns out as nice as yours. Thank you for sharing your how to video.

@sweetmimicreations8158 2 жыл бұрын

You are very welcome let me know if I can help with anything.

Ең жақсы KZbin

Пікірлер