2 ай бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
Пікірлер
@kb8doa 8 күн бұрын
This the Bronze Impeller standard for the Thor 20 model?
@johnnyhurtado3035 Ай бұрын
Saludos amigo! necesito su ayuda por favor, compre un presscontrol está nuevo y lo conecte a una bomba de 1/3 hp pequeña y a su vez a un tanque de agua de 2000 litros con buena presión de agua, pero resulta que después de conectar y energizar el equipo arranco muy bien con la luz verde y amarilla prendidas perfectamente pero ocurre que después de usar o lavar o bañarme o después de usar el agua y cerrar el grifo de manera inmediata se activa la luz roja, y si abro de una vez el grifo se apaga la luz roja y si cierro el grifo inmediatamente se enciende la luz roja hasta que el equipo presuriza y apaga la bomba pero la luz roja sigue encendida. Hay suficiente agua en el tanque con buena presión, pregunto por favor el porque prende la luz roja de falla al cerrar el grifo y sigue prendida después de apagar el presscontrol? por favor espero su ayuda. Gracias!
@PRAVULALKABI 2 ай бұрын
Can some one guide me how to built a automatic pump system when water comes in from source the pump will ON automatically and when water stops comes in Pump will stop automatically means no dry run.
@user-yb1mn9qo7p 2 ай бұрын
חרטטן - מדובר ביזם אחד שכל כמה זמן מעלה מוצר אחר ומבטיח עולם ומלואו - עד שאתה קונה ומגלה שלא עובד
@AhmedEssam-rr2ui 2 ай бұрын
Nice video
@JKBuddhu 2 ай бұрын
APC with a Starting pressure of 22PSI(1.5BAR) and 17PSI(1.2BAR), Which one is better?
@freeguy4195 3 ай бұрын
Sir is it okay if the apc and water pump is always on.?
@Apis_Trader 3 ай бұрын
I was on the fence if I should get one of these systems or use the traditional tank and pressure switch. I will choose this system this was an excellent explanation about how this system works. Thank you
@user-rv6ug5nl5p 4 ай бұрын
Hi my pump goes off and does not come on when tap is open. Please I need help.
@jamesfullerton3165 4 ай бұрын
I have power to my controller, but the indicator lights are off and pressing the reset button has no impact
@taurusgamingofficial4056 4 ай бұрын
I think the spring of mine was busted😢😢😢
@Smithy225 4 ай бұрын
Excellent demo and explanation thank you kind sir
@OthmanAlikhan 5 ай бұрын
Thanks for the video =)
@roberthedderman05 6 ай бұрын
Yellow light coming on ,and trying to kick in and then off every 5 seconds
@mahmoudhammad9060 7 ай бұрын
excellent
@yarmongao7823 7 ай бұрын
How and where to adjust water pressure?
@sydparker3445 11 ай бұрын
Thanks you actually tell us something helpful
@Mac-bn 11 ай бұрын
My watertank is full of water. Problem 1. The pump keep on running, I have check there is no leak in all the pipe and there is no water tap is ON. If i closed the valve, pump it will stop? If i open the valve it keeps running? Pump should stop when any of the house tap is not in use but it still keep on running, what should i do? Problem 2. Pump stop running, unless I press the reset button to start or I off the power and ON again waterpump will works, If no water tap is open within 1 hour, pump will not work i have to reset the preassure controler to start the pump again? what went wrong , please advice? thanks
@YellowFlashBang 11 ай бұрын
We went on vacation and when we came back the failure light is on. The pomp doens't restart succesfully. Any thoughts that might help? Thanks in advance!
@7mody271 11 ай бұрын
How can I contact you, I have a pump I am trying to change the voltage
@alekcerro1 Жыл бұрын
How this electronic device works? How does it stop when there is no water? How does it start when the water flows afain?
@SteveMcDonald-ku1ze Жыл бұрын
The electronic module has two reed switches assoicated with magnets inside the pump chamber. One is the pressure switch which detects the full or dropped pressure in the chamber. When the pressure drops, the pump will start. It will stay running as long as there is flow. The other switch is associated with the flow valve so that while water flows, the valve is open and so is the switch. When flows stops (tap tuned off) then the valve closes and the switch operates causing the pump to stop running. The chip used is usually a LM4093 or similar, which is a quad 2-input (Schmitt trigger) NAND gate. It is wired as a S-R latch, with one reed switch input as a Set and one switch as a Reset. The pump is controlled by a relay, controlled by the output of the latch. I have also used the dual comparator inputs of a LM555 instead. It has a smaller footprint, and is just as cheap and reliable.
@haydenpierre6522 Жыл бұрын
The pump stop work and the green light on
@haydenpierre6522 Жыл бұрын
My pump isn't working
@ThishaMashishi-cg3vt Жыл бұрын
Hi my pump always on falier for 2 days now I've reset and unplugged 😊😊
@offgreed7131 Жыл бұрын
Can it run on DC?
@moeranemoerane6221 Жыл бұрын
Mine doesn't stop. It stops for a second and start again. How do I adjust it?
@everydayhelp5085 Жыл бұрын
My pump will pump water but fault light is on , and it won’t cut off even after output valve is closed, I even shut the input valve and yet it won’t shut off , brought another pcu unit and still same problem, call 5 people to check and they can’t find the problem. Exchanged the new unit and got new one still the problem
@vsuviksha Жыл бұрын
My pump not started when tap open
@ashishkn3049 Жыл бұрын
For 10 sec, when the pump is on, and the taps are off, doesn’t it affect the pipe fittings?? Please Reply!
@18183 7 ай бұрын
When you design a system the maximum pressure that a pipe and fittings can sustain must be more than the maximum pressure of the pump. Ideally pump max pressure should be half that of the pipes
@vsuviksha Жыл бұрын
Beep sound when turning on power supply and failure led glows
@adeyemisheriff-wy3kt Жыл бұрын
Please I need answers to this question,if the pressure automatic control is working and someone Lock the tap and up it again and find out that water is coming out slowly slowly, what can be problem?
@NCMmixvlog Жыл бұрын
Wonderfull job, thank you for sharing, full support here. God bless
@Ly-dc4oi Жыл бұрын
i have a question, after detecting that there is no water from the source the switch will cut off and try severel times right? after that there is no water in the system and the pump will not work until you prime the motor again am i right? my motor is getting water from a well
@ssavva2027 Жыл бұрын
what to do when the system drop the main power switch?
@nomsTube Жыл бұрын
My switch has all 3 lights on. Resetting doesn't work. Changed the switch 3 months ago. Any ideas?
@user-kn8ff7oq6w Жыл бұрын
does this control work with a pressure tank?
@innocenthumans3721 Жыл бұрын
How 2 set pressure in this type of pump
@babysolon6492 Жыл бұрын
Hello sir I have a question this one no need for a tank?
@dexboyhandle Жыл бұрын
@Baby Solon yes, in most cases especially if your source is a Public Water Service line, it should be as follows: Public water Line>>Storage Tank>> Water Pump (APC is included here) >> Household water Supply
@stevewaterhouse3025 Жыл бұрын
Hi there had a water failure from the tank to the pump, red light on. I finally got it working by priming the line. pump is now operating however the pressure is low in the house. Can I re-set the pressure at the pump ? thanks for any assistance :)
@shiyagayajohannespanda646 Жыл бұрын
I want to know ho to install the speroni pump .,I have but is not pumping
@babythomas2902 Жыл бұрын
Sir, an Electronic control board unit is attached in my 0.5 HP motor pump. The electronic unit is same as like as in your video shows. No other pressure controls in the unit. Then How can we adjest pressure bar with this unit. ? Please mention.
@dexboyhandle Жыл бұрын
@baby thomas you can adjust the pressure by connecting a presure switch or buying an APC with Integrated Pressure switch inside of it..
@KK-gv6uz Жыл бұрын
Hey my pump shut off. It starts on only when there is high pressure water coming from the network. How to fix it pls because lately we havent had high pressure water from the network
@profi8649 Жыл бұрын
Good job
@hamedhassan9812 2 жыл бұрын
I am using it for boosting.
@josephjoe5603 Жыл бұрын
How well does it work just for boosting? Did you connect it directly to a pump or not?
@dexboyhandle Жыл бұрын
@@josephjoe5603 It should be connected directly on the Pump (APC)
@mfreiher 2 жыл бұрын
Hi, R1 resister on the control board gets very hot and will eventually have a open circuit. Why is this happening?
@OriaXu 2 жыл бұрын
Simple, clear and to the point! Thanks.
@narsshop4981 2 жыл бұрын
Where did you connect the pressure port to?
@chualatinhyeu4280 2 жыл бұрын
Hi, I store my water in Ibc totes. Which model is good to supply my whole house with 2 bathrooms, 4 sinks, 8 other faucets( used later)?
@kelvynribbon2201 2 жыл бұрын
Where can I buy this system and what isn the cost.
@sourcevolttech597 2 жыл бұрын
It's sit possible to test the pressure pump directly to power source ?