I love my 06 accord. Didn’t have to do any of this. All I did was open my glove box, remove the hook holding it, and then slid the air filter out. Didn’t need any tools whatsoever. Good video though.

Great Review Man 👍

I watched your video. I found ZD1 (zener diode) was already unsoldered on one end. It was so tiny, i could not reflow it. Resolved my issue ordering a used module asembly online.

Thank you. I just fixed my daughter's loud whispering faucet. It was filled with debris. I cleaned it. I used pliers and small screwdriver to get the plastic cover off.

Anderson Jason Williams Michelle Smith Amy

Funny how I checked the filter on my 2006 era Civic while as a passenger going down the road lol. Just flipped the glovebox lid down and boom there it was lol

Is it possible to install the AC filter without a frame? Is there no frame left?

Omg so many screws to remove u need 30 to 40 minutes to change.

It worked for me. I just soldered a jumper wire from D3 to R12. Thanks for sharing.

I am rebuilding the distributer of Daihatsu Cuore and need to do exactly that.! Thanks a lot it really helps.

i am sick of hearing about how water gets trapped in the pipes from the mains when its from your house tap. for me this sound judges the water distancing coming from the mains like there is a meter

D3 to R12 jumper works for my 2000 accord SE. thanks

I was just about to change mines then I seen all this shyt I have to go thru.. yeah maybe another day

Insane lol! Thanks for doing all that to show us

Thank you so much I fixed my brothers car with this video it was quick and easy to repair.

I know there's an oil filter but I didn't know there were 2 different kinds of air filters that I had to worry about! 😳

What does that ground cable do I did this and now my car cranks but doesn’t start

Been trying to hammer this out since forever. I started trying with a G-Clamp, but this looks like the right tool to use.

Hey do you remember where you got ur torque tench? And can you use it for wheels also thanks a lot for the video

I'm sure mine has never been changed. And after watching this video it never will be.

Thanks . Great video

Got a brand new kitchen put in 5 weeks ago. And there is a GUSHING sound now when I turn on the taps 1/4 of the way half way, but not on full. I am getting soaked when brushing my teeth, refilling my filter jug, etc. I used to be able to see the pipes, but now I don't. Please help!

If I were to send you 2 of these Climate Control boards what would you charge me to do this? I don't have a soldering iron and the few times I have tried using one I am not very handy with one.

Man you rock, I was able to fix my 98 Accord, AC is working now, thanks a lot

Hi vibration button is not working any tips ?

If you did one at a time you dont have to lable but still a good idea just in case

Ty

Vice grips

How to shut it off need help

Wondering if I can just send you mine so you can do it for me lol I’ll pay!!

Where do you get the coupling to reduce hose size to fit in the dipstick?

HELP. What kind or size wire do i use for the jump?

I got mine on clearance at Marianos for $14! Just put together today. Hope it works okay 🙏🏻

Cut an access panel in the back if the glovebox, cubon or plastic weld a clip on it, then you can get the filter cabin popped open and you can wiggle the filters in and out

Air filter (good charcoal ones $16 for two) but if you want a mechanic to do this, it will be $150 per hour! Thanks for the video, as I was able to do it! Of all the things on the 2001 Honda Accord models, cabin air filter placement is retardedly designed by Honda! My other car (the Lexus RX450h) takes 2 minutes to replace the cabin air filter. And literally 30 seconds to replace the engine air filter. That has the BEST DESIGN for engine air filter replacement. So simple that you can do with both eyes closed! LOL!

0:55 "Some serious erosion here. I should be careful" I was here just today and the spot you're standing on is gone, so good call, lol.

Hows the cleanup though? Looks like it would be a mess

Headed here tomorrow. Thanks for the preview.

I have a 2001 accord and pretty much everything about the car is a hassle as far as any repairs or maintenance. Things are hard to reach, tight spaces, and you usually have to disassemble and remove non-related parts in order to get to the parts that you want to work on. But it’s a great car!!!😊

So much work and it didn't work😂

I tried for only a meager 15 minutes with a hammer and nailset before digging a bit deeper and finding this video. Thank you for posting. A quick trip to HF and less than $12 for this tool (after using a 30% off coupon) was well worth it. The chain breaker, Item No. 66488, made short work of removing the pin. To reverse the process, I started with a small C clamp to get the pin started and then used the chain breaker in reverse. Getting the seal out took some effort, but it popped out cleanly. From the Dorman kit, the Hitachi distributor uses the ring marked as 12.45.

Thanks so much for this. This worked

Thanks! My dads accord had like no airflow cuz cigarettes for decades and now its blowing hard!

When you measure the oil level, your car need to be leveled.

I believe those other items you mentioned are transistors.

Good tutorial I'll be doing it soon thanks

Idk why I thought this was gonna be short and simple nothing else is on my 01 lol

Thank you so much!

No Wonder why alot of people dont change it. Lol all that work

After trying with hammer, etc... was desperate and thinking about begging the nearby auto shop to use their shop (hydraulic) press. Your video saved me. Thanks. Great idea. Dist. is rebuilt and ready to be installed in the morning.