I want to buy this cable

where i can find sensors serial number? thanks.

Should you calibrate it every year ?

Very informative webinar.

Great sir thanks 🙏🏻

Hello, I want to know what data is entered in the speed parameter.

kzbin.infoBL_JyIUNr24

kzbin.infoBL_JyIUNr24

kzbin.infoBL_JyIUNr24

kzbin.infoBL_JyIUNr24

This is precisely what I was looking for. Does the E series have water leak indicator! Thanks for posting.

Great video, and very clear on the instructions.

Great video information ❤ thank you for sharing your knowledge and experience 🇵🇭🙂

Incredibly helpful, thank you!

Awesome video, amazing content and most professional explanation

Great 🎉

Thanks for putting this demonstration together. I was following up to the 2:58 mark, where you were to increase the refrigerant (or nitrogen) pressure slowly until it was slightly positive above Atmospheric-Pressure. This procedure was to be done just before removing the vacuum-gauge's sensor from the side-port of the valve-core removal tool. Wouldn't having slightly positive pressure in the system contaminate the sensor??

Excelente

انا عندى جهازMegger. MIT525. لبيع لعدم الحاجه

You can send me this software ?!

Can you develop an app for the residential market that could provide the customer an electrical condition report. This would include problems such as voltage drop, poor ground condition, loop resistance , leakage current, GFCI outlet trip time and trip current , watts, efficiency, and megger insulation results for old wiring issues, reverse polarity, etc Customers nowadays like to have documentation so they can see the results and make decisions to make repairs . Just like when you take your car into a garage to have checked. This would be extremely helpful for the electrician and could be included with the repair estimate. All so to save the reports for the electrical inspector review. Just like they do in all most every other country.

will this work on my Macbok OS? thank you for answering

Buenas noches disculpe como realiza la comunicación modbus con este medidor de flujo,

Mine says bay 1 select 0 conflicts 3 not found More cancel

Factory RECALL On this product! Look it up and they will send you the AT 6030 Upgrade !!!💯💯💯

Factory RECALL On this product! Look it up and they will send you the AT 6030 Upgrade !!!💯💯💯

Factory RECALL On this product! Look it up and they will send you the AT 6030 Upgrade !!!💯💯💯

Factory RECALL On this product! Look it up and they will send you the AT 6030 Upgrade !!!💯💯💯

What would you do if you broke the threads on the circuit board stand-off?

Mandar información en español

yo what is this song called

Hi , Where can we order this product and how much it will cost?

This study which came up with a search of "How-Infrared-Cameras-Work", in YT proves that James-Webb photos/images are all fakes, in addition to the fact that conventional rockets which supposed to take these fake objects to "Space" can NOT operate in the vacuum of Space. For proof:: ("Solving-Apollo-Enigma")

Thanks!!! from Colombia!

Can you make a video on how to perform the calibration/readjustment of the instrument?

I need to contact a representative in Brazil. Do you have one? Could you, please, inform the e-mail or the phone number?

saya membutuhkan larutan buffer nya ph 7.01 dan 4.01

Segera setelah Ket bahasa Indonesia

Bahasa Indonesia

Thank you so much for this wonderful video

Hello, are there any updates or revisions to this tutorial? Thank you very much

Insightful! This’s the best video on emissivity.

The high pressure is generated by??

What is the main purpose of priming pump assembly. Plz reply

Inadvertently sent the last comment. Well they finally agreed to shut down the plant send all employees home. Even before that my idiot boss tried to recomend that sit cross legged with some kind protective cover. In one second what that would look like. I then got up and left and slammed the door so hard I nearly broke the glass on the door. I actually did not hear the final results. I actually moved to the furthest point of the plant, I did watch him clean it. It was so bad that I didn't realize these components were made copper. When he was finish I believed you could eat offit. The plant opened up in time for afternoon shift at 2:00 PM. I was just certified recently but thought it would be good Idea to send this report in the training company. They published it in their monthly. ( might have been Quarterly)with Thermagrams and comments nearly worth for word. I only regret I didn't keep this. I actually didn't keep my training because of my honesty. I regret that the manual is worth more than a lot of people where I live make in a whole year. Right now I couldn't care less. Just by searching the internet. This almost priceless. I this Webinar for free on Utube, I already listened to a couple lessons while writing. Even without seeing the slides I still remember a lot of the theories. I plan on taking the wwebinar again. Then I am going to make list of possible troubles that can occur that my boss when I mentioned Infrared doubted that what his smartphone camera can do Th

My name is Edward Monter I am 78 Years old. 14years ago I took this course only I was able to convince management to purchase an Infrared camera that in today's dollars equals 1 million dollars. If I had failed to do this, the manufacturing plant would have lost millions of dollars in addition to GM corporation. The irony if this results is that I did not receive one penny in Monatory reward. Not even thank you, The principle that caused me to find this is Emmiissitiv Value of copper. Still this disaster may still happen if I decided to return to the plant without checking this electrical device. I was performing regular infrared inspection in our Mechanical Complex. In my mind I thought while I am here to check the I'm check the substations. The reason I did this I because I had previously found an electrical problem with substation. Consequently Duke Energy was able to come out and fix it. While scanning because of a gle of the shoulder-held camera, our of the corner of my eye I saw a bright white spot. After further inspection, I discovered that the temperature of each phase was 135 degrees. I immediately contacted my electrical supervisor. Because of his and my supervisor about the benefits of Infrared, he told me to "check" it "occasionally. Just few days later I checked it again. T the temperature was now 500 degrees. The next day my camera could not measure the temperature without changing the filter. It was raining and steam was coming from them. Again because of the ignorance of even the General Manager, I had to prove the "accuracy" of the camera. I actually found 1 in less than 15 minutes. Management was still 100% convinced by did call in their expert who was a Level III Certification. I was told that he a newer camera . I imagine disappointment when he came with a camera that looked like some kind of antique. This lasted less than one minute. In just few minutes he said we need to shutdown this plant. He came back early next day. I sat at back of the room and listened to them. We told them the worst scenari .

That's surprising that a cold source reflection affects the readout of 75% emissive surface. Intuition tells me that the cold is the lack of energy, so O Kelvin cold source should not cause any reflection síce it doesn't emit anything. But if one imagines the cold object IR image "reflects" on the surface, it starts making sense.

kzbin.info/www/bejne/gn-qh5aYaNiFmMU

Why the red lead connected in return connection?

Hi, I wanted to ask you a question about a multivariable transmitter (temperature, pressure and flow). What happens if I reverse the polarity of the 24vdc? Can the instrument be damaged? Or just a malfunction of the instrument?