thankyou

I found mine randomly walking to work 2 years aho..been working since 😂😂😂😂

Do you need the scanner tool or can you js change the thingy and it be fixed

Do you have a video as you were removing the drive axle? Very hard to do without removing the spindle completely.

What tripod is that

Hi bud, I have the weirdest problem! I went to change the air filter and thought to check and clean the throttle body butterfly. It was fully open which I thought was strange as had no real issues, I mean I have thought the car was a little sluggish on acceleration (delayed) and thought maybe my EGR choking. I always put good quality treatment into fuel and try different types so thought maybe not so... Lately had a little stuttering at the first few lights after leaving the house first thing but not pulling off the drive? My throttle body was fully open with engine off, I sprayed it and wiped but was pretty clean... as you could wish for, I sprayed in with engine running spurts of spray at a time but no movement with butterfly? I had my naibours grandchild come with half decent scan tool tablet a month or two earlier to check car after I gave him a toe and he said that there was no codes, which he thought was suprising. I dont know if he knows fully whats wha but he mentioned my pedal showing depressed 19% ?? he didnt start the car with scan tool plugged in which I asked and said that I thought you could but he said not with his tool. He said he wiped the car for any codes anyhows. Oh I did have a funny few weeks with my battery dying a while back and got that checked but came back fine (just needs a charge so I bought a smart charger and let it do its thing but it kept dying on me and then I put the battery on a full repair charge and its been fine since plus i've kept car in a lower gear to charge up more as my brother said I was driving like a pussy... trying to save miliage 😂 Any idea bud why my butterfly is full open with no real issue on idle or revs going high and once the car warms up all other issues apart from sluggish accelorator dissapear! oh and I disconnected the battery a few times to charge so I assume the sensor would have reset as ive heard on another vid to disconect the negative. I have been worried why my surpentine/alternator belt seems slightly worn on the outside but looks great on the ribbed inside? I thought maybe my issues was the belt tensioner or idle pulley but strange how the black is wearing off on the outside and all looked good with no movement on the tensioner. I did hear the other night late on when it was quiet a little rythmic chirp ever so quiet which i've not heard before which makes me think the idle pulley but cant make head way with the throttle body butterly fully open?

Its nice to see you fixed that issue, it gives me hope lol No codes but gauges don't lie, at idle pedal is at 17% and TPS at 4% it holds around 700-710 rpm when warm. Driving I mash the pedal it reads 90% and TPS goes from 4% to 62% instant then it ramps up slowly and reaches peak at 78% right at shift point. 2nd and 3rd are 90% pedal and 78% TPS. When it shifts from 3rd at max rpm into fourth..... TPS goes down to 70% lol

Where can I buy a carbon fiber housing?

What scan tool are you using? Thx

Lesson learned, don't buy a car without doing my own full inspection. I thought I was smarter than that. 😢 Thanks, guys, for your patience and persistence.

I have 2. Cyclops really means beast

What pick up tube dude you use? Did you use the 240 or truck oil pan? Thanks. 🙏🏼

The 240 sounds awesome 👍

Awesome to see Klunker again

Cool 810

Wish I still lived in Vegas. Would love to have DJ work on my 240sx.

Saudades de você, meu amigo!

the magical s12 starter!

Having heard it in person, it sounds awesome

Excellent win 👍👍😎

What kind of battery does it take and can you swap it once it starts going bad?

I want to check mine and top off if needed. I’m sure it’s Dex III. I know Dex VI but do I use conventional or synthetic?

Is that the Duralast throttle body you replaced it with?

Elder P Smith! What a wonderful missionary you were... I miss you my friend!

I replaced the throttle body this past weekend and still getting red flashing lighting bolt, today it started flashing and started loosing power when it finally did recover it started running rough so I pulled in gas station turned off when I cranked it up no lights and drove home with no issues what can I do now to keep the light from coming on and stop the struggling?

Thanks a lot! very useful

So for my 2008 jeep I would need the scan thing to reset it cause I replaced but I still can’t drive

nice

Cool thanks for sharing this little bit of information 👍👍😎

Great instructional video!

How come no one talks about the charger, thats the 1st thing I want to know, does it come with charger and charging cables?

Toyota prado rims mt fit

Something I should consider adding to my tools

Great job man

Awesome to see this video. 👍👍😎

I also modified my stock 720 air cleaner to fit the Weber I used to replace the malfunctioning stock Hitachi unit on my 84 kingcab. I cut the inside middle portion from the bottom of the housing and replaced it with flat tin with a cutout for the Weber unit. Turned out very stealthy, engine bay looks stock. The stock air cleaner has much better filtration and much less intake air noise than the open Weber unit too.

Just seized my z24 wish me luck

That was awesome and helpful-thanks!

Why a micro and not a megasquirt?

Is this the same engine that the ram 1500s ecodiesel 3.0 turbodiesel have?

Hi guys, love the video, My 80 Datsun 720 king cab height is like a 1" or 2" lower on the driver side than the pass side. Is all i do is tighten up the driver side to bring it up some, or do I have to pull the bar on driver side to go up a little? I want to bring up the driver side to match the passenger side height

Whats the difference between a z24 and a z24i

What size wrench did you use ?

Can one replace without being a technician or having special equipment

Great info!

Looks like fun! Neglect killed that engine. Just by looking at how dirty the exterior is I can imagine how the oil and truck are. That engine could still be rolling if proper cleaning and maintenance was done. By the way just came across your channel. I had purchased an intake from you a couple years ago here in vegas.

To bad you didn't just clean it .

What type of oil do you recommend but above all what viscosity should it have . Tks

Hello I have dodge charger 2009 , and I got same issue since weeks I went to the garage the warning light it was fixed for 1 month and then it happened again , I don’t what to do , please I need your help , here in Dubai the garages are useless !!!

The computer readers we get at the auto parts store are a big problem sometimes as well. People think it gives them 100% the answers.