Saratoga Steel (Chuck Hamm)

Пікірлер

@yeehaw2720 26 күн бұрын

Thanks. This video answered so many questions I was wanting to know. Thanks for all the details

@number8wirenz360 4 ай бұрын

Loctite Blue in the paste IS WAY EASIER TO USE my bro! 🤣

@Craft518 4 ай бұрын

Thanks for the tip!

@michaelgonzalez3336 4 ай бұрын

Lo mejor de lo mejor Benelli me gusta mucho por lo liviana comparadas con otras.

@shaneblackwell1508 5 ай бұрын

How well does the 15hp push it?

@Craft518 5 ай бұрын

Got about 17MPH. It was only to get on the water when we bought the boat. Quickly upgraded once I found the mud motor I wanted

@forcemajeur.5138 6 ай бұрын

Excellent video for a mechanically stupid individual like myself. The only thing, which I could be wrong is the bps handle thing you said would face backwards. I believe (at least that is how we have always used the stock ones) are a grab bar of sorts like the pro drive bar but smaller when running the tiller left and right fast trying to get moving in super nasty shallow situations. Granted the newer ones like yours typically don't have much issue getting up and going but on my old 35 I've had to use that a good bit. Then again my boat is a damn barge and underpowered and heavy and it is location dependent. Correct me if I am wrong though, either way thanks for the in depth video brother.

@meetoo50 8 ай бұрын

Should use Marine grade wire/cable. Marine grade is tinned to prevent corrosion due to the moisture. That' why strand wire goes bad so often on trailers and boats that don't use marine grade wire.

@Craft518 8 ай бұрын

Coulda shoulda woulda that boat is long gone.

@TNsher776 10 ай бұрын

It's a nice boat, but under powered. Definitely needs atleast a 40 hp on it

@Craft518 10 ай бұрын

Well ya. We put a different motor on it but had this on there to get in the water. That boat is long gone though now.

@TNsher776 10 ай бұрын

@@Craft518 you should've kept it, was a super nice boat

@dwayneleriche6793 11 ай бұрын

My twin pack had the plugs right into the harness clip the same way my baby mojo did

@chadhoeschen1463 Жыл бұрын

😂

@galinkrastev4427 Жыл бұрын

Nice...I miss that place so much.. big fish in there

@Craft518 Жыл бұрын

It’s our little hideout. Not many go there with Saratoga sonclise

@robertherbert1306 Жыл бұрын

The rear anchor light is way too short it needs to be above or taller than any person or object that is in the boat. Otherwise, a oncoming boat will not see the anchor light because someone sitting in the chair blocking it, or some other object in the boat, blocking it at night and you will get a run over my friend! And on top of it after the investigation is done if you survive, then you will pay for all damages on their boat because it will be your fault. It would be the same thing as driving around in the dark in the country with no headlights on your fault. Just saying 🤔

@Craft518 Жыл бұрын

Noted.

@NguyênNguyễnĐức-c5t Жыл бұрын

Cái này có bán viet nam không nhỉ

@BobSchiro Жыл бұрын

Can you please give me the measurements of your offsets for your seats. I don't want to cut into them. Thank you Bob

@Craft518 Жыл бұрын

Sorry I don’t have the boat anymore.

@rodzarodza809 Жыл бұрын

ท่อเท่าไร

@bakervinci163 Жыл бұрын

You gotta put that transducer on your transom. You don’t know your depth, unless the trolling motor is down?

@Craft518 Жыл бұрын

No you don’t and for this rig I wouldn’t care the depth since it’s running a mud motor. If driven it through 6-8” of water, but that’s long gone. My new boat has transducers on the transom for side scan and on the troller for other needs.

@bakervinci163 Жыл бұрын

Take it off for duck hunting. Trust me

@Craft518 Жыл бұрын

It was removable. My new boat has one that stays but stows up on the rear and a removable troller so that goes off in the season.

@butchcantara1497 Жыл бұрын

Sir how much 40hp vanguard in your stamate price?

@DmacReviews Жыл бұрын

I installed mine but im getting air but no heat. any ideas?

@Craft518 Жыл бұрын

Shoot me an email [email protected]. Let’s talk.

@AlfredMorganFishing Жыл бұрын

About to buy this for next fall season in NY, going up north so I'm going to be cold If I don't haha

@Craft518 Жыл бұрын

Had an opportunity to do a 20° sit with the sanctuary and it was really good. I did have crispy wild rock 800 g boots and I did wear toe warmers with them. I don’t wear gloves unless I’m walking out and climbing so I do use hand warmers in the pockets. It was great.

@TheEvandando Жыл бұрын

How do you know when it reaches full draw? Good videos

@Craft518 Жыл бұрын

And a large majority of those that are dual cam each camel have a draw stop. It hits the cable when it comes to full draw for your draw length. Single cam or no cam models are a little different.

@austintodd735 Жыл бұрын

Where do you get these remote kits?

@Craft518 Жыл бұрын

12volt monster website

@clewis382 Жыл бұрын

Horrible motor for bass boats due to the pain on stowing it with no handle to pull it up

@Craft518 Жыл бұрын

That motor is long gone. Moved to a terrova on our new boat which is equally difficult with no handle but I can’t complain. It gets the job done

@nickb8618 Жыл бұрын

Need some performancevtwins roller rockers and billeted push rods with worked heads

@Craft518 Жыл бұрын

Someone else does now. I upgraded to a prodigy boat with the Mudbuddy 5000. Much better

@nickb8618 Жыл бұрын

@@Craft518 lol yeah that has roller rockers. I wish my prodrive was faster but honestly the fpr can’t be matched by gtr or mud buddy for reverse in the slop

@Craft518 Жыл бұрын

Agreed the increased HP and power was great. Pro drive is a great option.

@barrymaddux8943 Жыл бұрын

I just ordered my set with wind stopper! Super excited

@Craft518 Жыл бұрын

Hell ya. I’ve been using mine this year already

@scottpomygalski6078 2 жыл бұрын

What the hell is wrong, I am watching some guy in his underwear talking to me from his livingroom ?!?!

@Craft518 2 жыл бұрын

No, it’s my basement. But I bet you watched the whole damn thing.

@scottpomygalski6078 2 жыл бұрын

@@Craft518 Darn Right!!, I hunt up north too, and this video was awesome! . Hey I did't say it was bad, I just looked at myself watching a guy in his underwear as definitely funny.

@Craft518 2 жыл бұрын

Well, if you watched one, you might watch another so don’t make it a habit. I’m glad it helped.

@scottpomygalski6078 2 жыл бұрын

@@Craft518 It did, I wish you could do one for socks and boots.

@slooney4067 2 жыл бұрын

Thanks. One thing I appreciate is you telling your height and weight and exactly what size you wear on top and bottom. Very helpful for ordering online!!

@Craft518 2 жыл бұрын

No problem. Still using these pieces and they are great.

@angleroutdoors8527 2 жыл бұрын

I have a 2019 1542, when you cut to make those 2 hatches in the back by the transom. Was it foam filled?

@Craft518 2 жыл бұрын

Yes it was. Obviously it will effect the floatation if you swamp the boat so at your own risk.

@HawkEye02088 2 жыл бұрын

That is a fancy $3,000 outfit 😂😂😂

@archer3857 2 жыл бұрын

So how well did they work.

@Craft518 2 жыл бұрын

I’m impressed with it all but I went with crispi boots and rarely have a point to wear the lacrosse high boots. It’s true the light weather stuff is too light late in the season so you have to have another set for extreme cold. If I’m honest…my Sitka gear is way better and I would do that if I had to again.

@archer3857 2 жыл бұрын

Sactuary is not wind proof is it?

@archer3857 2 жыл бұрын

I live in upstate NY as well and tired of getting cold.iI bought the sactuary set for this year along with some base layers.Mistake?

@Craft518 2 жыл бұрын

Depends on where you hunt but it could’ve been a mistake. Sitka gear has wind stopper technology that’s great for duckhunting. I think I might sell my Firstlite outer layers and get Sitka outer layers. I love the base layers from both companies. In the long run it does what it supposed to but if you want wind and water protection from Firstlite you’ll have to get that new set that just came out.

@Pmagmaster 2 жыл бұрын

Was awesome video I'm about to purchase this same boat for sure

@jeepchronicles5644 2 жыл бұрын

I’m curious, do you hunt flooded timber? I got a marsh Hudson jacket two seasons ago that’s great but I can’t help but feel that the timber is more versatile? I hunt the Chesapeake bay salt flats and have started hunting some swamps and I’m curious to know how that pattern works for you all up in NY. Great video!

@Craft518 2 жыл бұрын

I will tell you this we often hunt of shore and in the timber. Wouldn’t call it flooded Timber but absolutely standing in water amongst trees and cattails. I love it because everything here is dark. Lay down blinds close up so it’s inconsequential why color you were IMO. I am thinking about getting a Marsh layer like a Traverse pant and wader jacket for panel hunting in the fields that I’ve been doing recently.

@OutdoorDealsman 2 жыл бұрын

I bought the same switch panel. Since they are all desperately fused already. My question comes from the battery on off kill switch and exactly how that is wired. Could you explain? Thanks!

@Craft518 2 жыл бұрын

There’s a diagram in there somewhere. Essentially, it’s battery ground to cutoff, cutoff to grounding block for all devices, grounding block to switch panel where all the hots go to each device. This also means the motor too. That goes to the ground cutoff.

@OutdoorDealsman 2 жыл бұрын

@@Craft518 so it is essentially doing the same thing as a battery on/off switch. Just using the ground instead of the positive?

@Craft518 2 жыл бұрын

Depends on who you ask. Stock cars are negative side, NHRA say positive, some boat manufacturers do it different. I prefer negative.

@dorito31561 2 жыл бұрын

would this cab work with a rear 260 backhoe (the kind where the seat swivels around)?

@Craft518 2 жыл бұрын

Not likely

@jakeyanchisin1840 2 жыл бұрын

How well do the waders paired up with the gradient bibs keep you warm late season?

@Craft518 2 жыл бұрын

Liked both options for under layer and honestly couldn’t tell a difference at 30°. Once it dropped below that you could tell the permaloft bibs did have an extra warmth and glad I had the option for super cold weather.

@RitzWood32 2 жыл бұрын

Is this the first sanctuary? I assume it’s not the 2.0. I think 2.0 came out 2021 if I’m not mistaken

@Craft518 2 жыл бұрын

Not sure but I suppose the could be since think I got these when they first came out.

@danielstacy4788 2 жыл бұрын

What size waders did you get

@Craft518 2 жыл бұрын

Went with the large and size 11 boot. I can fit the duck over under it with a bit of tightness in the chest but not enough to be uncomfortable. It’s actually perfect. I also opted to get her Hudson jacket as well for all year use and the duck oven is just an everyday jacket bow

@ronnoggle8562 2 жыл бұрын

The Front Small Plates you drilled out the rivets. What did you use to re-attach them? Great video by the way

@Craft518 2 жыл бұрын

We used a bigger stainless screw and just ran it for a bit. Ended up getting rivnuts which worked way better

@greggpressler8588 2 жыл бұрын

I have that exact same boat. How did you put your black access doors in casting deck with the big cross braces that are underneath? Did you chop them?

@Craft518 2 жыл бұрын

I have another video on my channel where I do talk about cutting those supports out. Are used a grinder with a cut off wheel for most of it and a saws all for that section. I’m pretty sure I drilled for holes in the corners to make it clean as well

@TheSilverSurfisher 2 жыл бұрын

Greetings...thanks for your video. Now then, at 12:36 the explanation about the terminal blocks where the battery is connected to one and the battery is connected to the other and your comment about the colors ("red in the back and black in the back") is difficult for me to understand. Also, are those blocks somehow connected to each other with some metal conductive plate to power the motor or what??

@Craft518 2 жыл бұрын

There are two separate blocks in the rear of the boat. One of them is a hot wire one of them is the ground wire. They were made that way so we could remove the motor and replace it and easily remove the cables right there

@Craft518 2 жыл бұрын

So yes each black box on the transom brace is connected. One is all power one is all ground

@TheSilverSurfisher 2 жыл бұрын

@@Craft518 Okay thanks.

@4499duke 2 жыл бұрын

Great job! I just ordered a 1754 with a 20 HP Merc and a 45 lb. trolling motor yesterday, my first boat. I asked the BPS people if I could add a third seat like you guys did, they told me it would void the warranty. If true I assume any other cutting you did would. Did you guys check on that? The wiring part of your video ws VERY helpful, answered all the questions I had. Thanks!

@Craft518 2 жыл бұрын

It probably voids warranty yes. Didn’t check and honestly we weren’t worried. That boat is still in working order and smashing ducks with its new owner.

@DFA2503 2 жыл бұрын

Awesome….thanks for the vid

@Craft518 2 жыл бұрын

Welcome

@kurtboyd7681 2 жыл бұрын

what size duck oven and gradient hoody do you wear?

@Craft518 2 жыл бұрын

I got large in both. Done again I would go XL on the DU

@ecmo2007 2 жыл бұрын

Thank you for this review. I don't usually ask guys this but... Can you tell me what your waist size is? Lol. Thanks in advance.

@Craft518 2 жыл бұрын

Oh Rick BEHAVE!!! Hahaha. 34” waist. About 5’10” and 170#

@ecmo2007 2 жыл бұрын

@@Craft518 Lol thanks brother.

@JackofSomeMasterofNone 2 жыл бұрын

Know this is a long shot. But I’m swapping the stock carb for a 35 that doesn’t come with electrical connection for the solenoid…is it needed?

@Craft518 2 жыл бұрын

I’m not sure if it is needed or not for you application. Sorry man I wish I could help but I am now into EFI Mudbuddy 5000 so no more carb work for me.

@Ryder0890 2 жыл бұрын

Curious as to why the 2 insulation pieces? (gradient and DO) kinda defeats the purpose of the 2..

@Craft518 2 жыл бұрын

I don’t use them at the same time. It’s just to show all the options. I use the DO as a daily jacket and really don’t use it to hunt. I have the Hudson for late season and is the wafer jacket early season

@TripleRwoods 2 жыл бұрын

Good video. Trying to find a trx8. What’s your “year later” review of the trx8?

@Craft518 2 жыл бұрын

Still have it and I still love it. Just started indoor the other day. Did swap over to a black dot and ditched the lighted pin but other than that same setup with green twisted X strings now.

@4mileoutdoors268 2 жыл бұрын

We need more content and how’s the first lite stuff holding up

@Craft518 2 жыл бұрын

Going to do a few videos about the new prodigy boat first year, Sitka and Firstlite gear “what worked what didn’t”.

@Sarhawk123 2 жыл бұрын

Did you have to do any modifications to get that motor to fit with the support brace in the back?

@Craft518 2 жыл бұрын

Good question. The motor will come with an 1/2” aluminum plate that the motor screws press against. I had to cut the center of that out and use the two pieces like washers. Ultimately no modification to the motor or boat short of drilling two holes for the standard motor bolts to go through the transom.

@3teethgarage574 2 жыл бұрын

I have the same gun and it rust every time I take it out and don’t oil right when I get back home. Does yours do the same ?

@Craft518 2 жыл бұрын

Sure does hahaha

@brentniedermeier5272 2 жыл бұрын

Turbine aircraft oil works good for preventing rust on these benelli’s. Put some on a rag and wipe it down good. If it has a slight shine that’s fine

@Craft518 2 жыл бұрын

@@brentniedermeier5272 that is a great tip. Thanks so much!!!

@hoss6981 2 жыл бұрын

I’ve never seen anyone wear 6 layers before lmao don’t think I’ve ever worn more then 3 and that’s down to 0 degrees

@Craft518 2 жыл бұрын

It’s just the options that Sitka offers. Actually only wear three. Base, mid and jacket. Bottom is base, insulation and waders

@hoss6981 2 жыл бұрын

10-4 I love my sitka great review I’d love to get the waders but they don’t come in my size

@Craft518 2 жыл бұрын

Honestly high and dry are likely just as good. The mind plays tricks when you’re trying to be all “matchy matchy”.

Ең жақсы KZbin

Пікірлер