Hi

Trying to figure out shortfeed issue after every strap

Hard to tell how old this video is until he pulls out that DeWalt 😅

This is a very simple test machine The total weight is only 12.5kg Maximum test load 20KN (2000 kgf) 1. Dealer repair 2. Production line process inspection 3. Incoming/outgoing inspection 4.Exhibition display 5.Others 6.In addition, there are advanced functions that can collect data for graphics and analysis. kzbin.info/www/bejne/hKSvon-iq52Unas kzbin.info5BvPKeHl5L4 Would you be interested?

Question. Looks like a great product, but the demonstration causes my to ask, what is the degradation of the "bonding" so to speak between the multiple beams when the drilling debris falls between each of the individual components (individual LVLs), causing some amount of air gap between each component, rather than a smooth clean face between each beam. Seems the best way to do this is still to predrill (a pilot hole first), then let the screw do the sizing with minimum debris contaminating the joining of all LVL surfaces.

Thank God I can build a dog house without a dad gum permit! 😅😂😅😂😅 As I grow older & wiser I always ask why so many codes permits etc!? When the great storms (Tornadoes Hurricanes etc. ) come through all this stuff is torn to shreds! Millions of dollars worth of damage etc! Why can’t we keep life more simple & rebuild when needed!?😮😅 (& at a lower cost!) Living off the grid is starting to look more & more better than a greedy society making more people homeless!

Hay muchos equipos de flejado pero hoy y siempre será signo de los equipos confiables 👍

Great machine until it does not work anymore. Have called Storopack and they have not helped. Very disappointing, overpriced machine with overpriced rolls of film

Todos los modelos de equipos de flejado de signode son versátiles y simplificados es lo mejor del mercado

I'll need to contact Simpson for ideas how to fix my garage overhead wall myself.

Have 11' of garage wall at overhead door that is termite eaten. Need to replace the entire rough opening and the top plate and tie it in with existing undamaged wood, all while not disturbing the brick face on front of house.

How about making some videos that aint f****** commercials with some actual? Information not a f****** commercial

Cost?

I hope this gets more views👌

Have major termite damage in load bearing walls and would like to know the process of rebuilding even if I hire a contractor to do the job.

Ts corny

Great stuff !👍

How much did a machine like that go for? Ballpark

Salut. Comment changer le bus

Simpson Strong-Tie never ceases to amaze me with their innovations for construction.

Hi 8840 teg how can install

Very helpful. They should add a QR code to Strong-Ties that link to this video.

And we've learned that it's masonry, not masonary.

Once the block broke apart with the wood still stuck, he just Drop-da-mic and walk.

The guys are looking at this machine right now I work on second shift they have no owners manual I hope I can get it running I just winging it new machine you don't know how it works yet I hope this video helps

Do these bolts ever cause leaking in the basement? I think I have a problem with a window leak, but my FIL says I need to back these bolts out and seal them. I’ve never heard of that.

Hanzhen harmonic drive gear , robot gear , strain wave reducer, over 30 years experience

I love SDS screws, but gotta say that I snap at least one a day. Also, Simpson states that several of their connectors work with #9 SDS, but have fun with that! They hang up and can snap, even without torquing.

would have loved some "talk" to advise on tensions, manual vs. semi automatic. This did not help at all

thanks for the info

I used to work at the warehouse in broken arrow in 2001. Our shift we got injured all the time. I remember they were just using a robotic arm on the first line. It went nuts and smashed all the cores. That job was tough and loud. No music..

According to the International Residential Code², adopted by most states, a deck does not need a building permit if it is “less than 200 square feet, under 30” off the ground, does not serve a required exit door, and is not attached to the dwelling“ - if it is freestanding. Ledger boards are an invitation to disaster... Don't attach your deck to your home. Don't be stupid.

Looks stronger than a hurricane clip.

Why are your hangers flared?

guess they don't much biz down south in Fl. Ain't wood. Its block and concrete.

I like the idea. What do you do when (in a remodel - adding partition wall) there is a 3/16” gap from truss to top plate? Add a shim? Or?

1:39 Those are some nice looking hands.

strap wont tighten

Can I use this video

1:10

How much is it

Would have liked to seen the guard rail system installed

Picked up 6 Strong-Tie mending plates. Doing the job!

Whats the cost difference between 6 in. Nails or the hurricane ties system?

What's the link to buy

Mmm... no thanks.

I have to watch this whole series for college, and I'm genuinely surpised to see that all the other comments are from people who just wanted to watch a safety video.

it's looks like this video clip is only a part of it, can you update the other else to complete entire HMI programming introduction demo? Cheers!

lol, poor robot getting smacked by that air line every time around. Looks like a very useful robot 👍