Freedomseedspreader

Пікірлер

@OneWhiteRaptor 13 күн бұрын

what Weapon Light Pressure Switch Mount did you use? not sure if you mentioned it in the video, my guess is m-lok?

@devinadkins4090 12 күн бұрын

@@OneWhiteRaptor yes, I used the mlok slot.

@etorres671 Ай бұрын

What magpul stock is that

@devinadkins4090 Ай бұрын

www.brownells.com/gun-parts/rifle-parts/rifle-stocks-parts/mossberg-500-sga-buttstock--m-lok-forend-kit/

@HK-wq1ei Ай бұрын

damn I wonder if any other optics rails will work on it.

@devinadkins4090 Ай бұрын

@@HK-wq1ei yes, you can get a dovetail to picatinny adapter and have all kinds of options

@jonleone777 Ай бұрын

Hobby lobby has self adhesive foam sheets that ars thin. Cut out to fit mine and works grsat.

@devinadkins4090 Ай бұрын

@@jonleone777 that’s a good idea as well. What color are the sheets?

@JeffZumbrock Ай бұрын

Hey dude what size hex bolt holds in the butt stock??

@devinadkins4090 Ай бұрын

@@JeffZumbrock man I wish I could tell you, I threw away the old stock and bolt.

@takinisurvivalchannel3812 Ай бұрын

Yeah, Nordic Components makes an extension that has a recess for the clamp, so it doesn't slide.

@devinadkins4090 Ай бұрын

@@takinisurvivalchannel3812 hindsight that’s what I should’ve bought. It worked out I suppose but with more effort than was needed.

@humanentity5890 Ай бұрын

Can you please do a tutorial on how to install the magazine extension tube?! I ordered one but it arrived with no instructions... and I'm a novice at this kinda stuff!!!

@devinadkins4090 Ай бұрын

kzbin.info/www/bejne/mpmsial9p8dpn7ssi=ViSuDUurQj_TPgxa

@sandman-4544 Ай бұрын

hey did your gunsmith ever get back to you about trigger pins

@devinadkins4090 Ай бұрын

@@sandman-4544 no he didn’t, I’ve just been pushing mine back in. I’m glad you mentioned it, I kinda forgot about it

@tavarisphillips8987 2 ай бұрын

How to do you install the plus 2 tube?

@devinadkins4090 2 ай бұрын

@@tavarisphillips8987 unscrew the cap on the end, but beware, there is a spring that has pressure on it. Then screw the other on pretty much.

@thorshammer5134 2 ай бұрын

Get the Hammer tx3 instead, pump actions are way more reliable.

@devinadkins4090 2 ай бұрын

@@thorshammer5134 yeh I seen those, MAC makes one that I wanted. Just ended up going with this one because I’ve never owned a semi auto

@thorshammer5134 2 ай бұрын

@@devinadkins4090 ah, I started shooting 12 gauge at around 10 years old. Still use the same Remington 870 for hunting 20 years later. I’ve had their 1100 as well as other auto loaders and they all just run into issues after a while. You can shoot a pump almost as fast if you’re good at running the action. Then you can use mini shells, load how you want etc. I’m not against auto loaders at all. Except if it’s a combat/ self defense shotgun. Firmly believe they should all be pumps. I know they currently use the Benelli M4 a lot and it’s been reliable. The pumps are just less maintenance and will last longer while still being more reliable imho.

@devinadkins4090 2 ай бұрын

@ yeh those mini shells are neat but I know that most pumps bad to have an adapter, and at the point I owned a ksg, no other pump would cycle them.

@defsteph-og 2 ай бұрын

Dis you ever fix the rail walking? How’d you do it? I put a rail on my TX3 Hammer Pump Action, used thread locker, and same as yours it started walking after about 4 shots as I was trying to zero the optic I had attached to it. When I unscrewed it to take a look, my screw is slightly crooked.

@devinadkins4090 2 ай бұрын

@@defsteph-og RED LOCTITE lol. Hope you don’t ever need it to come off 😆

@defsteph-og 2 ай бұрын

@@devinadkins4090first I gotta find a new screw, because the one I got with the rail is f-ed 🤣Thanks though, I’ll pour some red goo in there once I do!

@devinadkins4090 2 ай бұрын

@ lol. That sucks, I didn’t want to use red but gotta do whatcha gotta do I guess lol

@MrSupergoose73 2 ай бұрын

So does it work or not? I have one but haven't fired it yet.

@devinadkins4090 2 ай бұрын

@@MrSupergoose73 yes, I have about 300 rounds through mine, had 2 not cycle with “upland bird and small game” rounds that were 1255 fps. Everything else it has shot

@sh0wnuff304 2 ай бұрын

What charging handle are you using?? I would like to get that one for mine!

@devinadkins4090 2 ай бұрын

lol. Link in the description.

@trilliamogdlocog4986 2 ай бұрын

Not much to try cheap Turkish products but this one is cheap enough to say why not lol just ordered one hopefully it runs good 🤷🏼 Just found out higher end shotguns like the mossberg 940 have issues aswell and can't just buy spare parts like extractors , springs, etc so like I said if this shotgun runs good then really can't beat it for the price.

@devinadkins4090 2 ай бұрын

@@trilliamogdlocog4986 lol. Yeh for that price absolutely. The one I have has done well so far.

@Mike80528 2 ай бұрын

There are high-temperature sealants used as auto gaskets, among other uses. A dab of that under each clamp would likely do the trick...

@devinadkins4090 2 ай бұрын

@@Mike80528 it would I’m sure

@Gomer2442 2 ай бұрын

Can you advise me. I’m 100-150 rounds of heavy double 00 shells and I cannot get more than 2 to cycle cleanly. It will jam, fail to eject, etc… I’ve taken it apart and cleaned /polished everything. Not breaking in…. Help?🙏🏻

@devinadkins4090 2 ай бұрын

@@Gomer2442 what brand ammo and what fps are they?

@inscoredbz 3 ай бұрын

Hows this with bird shot like federa and Winchester l bulk ?

@devinadkins4090 3 ай бұрын

@@inscoredbz the Winchester super x upland and small game had cycling issues which I don’t quite understand since stuff that had lower fps didn’t

@inscoredbz 3 ай бұрын

@@devinadkins4090 well Winchester ammo does suck for the most part. That's weird though.

@devinadkins4090 3 ай бұрын

@@inscoredbz yes it is

@kwixx 3 ай бұрын

you stated that is a Magpul stock. Is it a Remington 870 or Mossberg 500 series stock?

@devinadkins4090 3 ай бұрын

@@kwixx mossberg 500/590

@devinadkins4090 3 ай бұрын

@@kwixx magpul.com/sgastock-mossberg500-590-590a1.html?mp_global_color=118

@MJVM891 3 ай бұрын

How is the charging handle holding? I got one for replacement thanks for the info.

@devinadkins4090 3 ай бұрын

@@MJVM891 so far so good!

@MJVM891 3 ай бұрын

@@devinadkins4090💪👌👍

@shawnrice2081 3 ай бұрын

Still trying to figure out how you got the old one off

@devinadkins4090 3 ай бұрын

@@shawnrice2081 take out the sling stud, it holds on the butt pad and then use a long tool to reach the screw inside

@wigon 3 ай бұрын

Just curious, but why not just use the Mlok slots to mount a flashlight? That's what I did and it works fine.

@devinadkins4090 3 ай бұрын

@@wigon it casts a shadow, it’s preference. I like having the light flush so that I get the most light.

@wigon 3 ай бұрын

@@devinadkins4090 Ah ok. Yeah I have my AR15 SBR setup like that to avoid shadow. But on this shotgun, I figured that some shadow is better than having no light at all.

@devinadkins4090 3 ай бұрын

@@wigon right, I ended up putting some black “wrap” on it and so far so good.

@billmidkiff1985 3 ай бұрын

I bought one. Took it apart. Cleaned and lubed. Ready to go. Then Helene hit. Flattened me and my house with a landslide. I lived. All guns gone. So I bought my 2nd. She's ready for action. Both were $109.99 each. Got them both 2 days after ordering. Life is good P.S. Palmetto State Armory has the original Ruger LCP for $169!

@devinadkins4090 3 ай бұрын

@@billmidkiff1985 sorry to hear that man, hope everything works out for you

@ghostdog7576 3 ай бұрын

Can the forend be changed ?

@devinadkins4090 2 ай бұрын

Not that I know of. I’m sure you could probably MAKE something work but I’m not sure

@EWhite-ed4mc 3 ай бұрын

Mount it to the mlok slots on the handguard

@devinadkins4090 3 ай бұрын

@@EWhite-ed4mc it casts a fairly big shadow when mounted to the mlok.

@SerpentG42 3 ай бұрын

Did it fit???

@devinadkins4090 3 ай бұрын

@@SerpentG42 nah. Neither the folding stock nor the pistol grip fit. Unfortunately

@SerpentG42 3 ай бұрын

@@devinadkins4090 update videos if you find one that fits

@nickg0411 3 ай бұрын

have a machine shop knurl the extension and your slipping is fixed

@devinadkins4090 3 ай бұрын

@@nickg0411 good idea, wonder how much that would cost

@bodyguard856 3 ай бұрын

What brand is the magazine extension?

@devinadkins4090 3 ай бұрын

Tokarev, link in description

@123karismith 3 ай бұрын

Dump the barrel clamp, you have mlok rails at the front. get a flashlight like Defentec DF-9030... your welcome

@devinadkins4090 3 ай бұрын

@@123karismith nah, using mlok slots casts a big shadow depending on which side you place it. So far the clamp is working pretty good since I put a “wrap” under it. Thanks for the tip though

@123karismith 3 ай бұрын

@@devinadkins4090 Well, I don't like shadows either....I'll mount one on each side and have headlights...haha

@devinadkins4090 3 ай бұрын

@@123karismith 😆

@123karismith 2 ай бұрын

@@devinadkins4090 just posted a short video showing the folding stock installed....it took some whittling to get it to fit.

@adrianmunoz6103 3 ай бұрын

Try a scilicon mat just cut it to fit your barrel clamp

@devinadkins4090 3 ай бұрын

@@adrianmunoz6103 yeh, if what I have doesn’t continue to work I’ll try just about anything lol, thanks for the tip

@rabbitdaze2243 3 ай бұрын

Why not just use a mlok mount on the forend with mlok slots for the light??

@devinadkins4090 3 ай бұрын

@@rabbitdaze2243 I tried it, it casts a pretty significant shadow on the opposite side that the light is placed, pretty much 9 o clock to 6 o clock was a shadow, just a preference I suppose but with the light flush with the barrel there is no shadow.

@Fatma5.56 3 ай бұрын

@@devinadkins4090 lol

@jerryg2073 3 ай бұрын

Still no rear sight assembly available. 11/21/24 update = finally in stock!

@devinadkins4090 3 ай бұрын

@@jerryg2073 yeh I just looked as well but honestly, you don’t need that sight specifically, just search for a “dovetail mount ghost ring sight”, there are multiple options. Some are cheaper

@SheugMcbain 3 ай бұрын

I'm going to try putting some black 3M coban self adhering tape under my clamp. No glue. Interested to see how well the Nordic barrel clamp gasket works, good luck!

@devinadkins4090 3 ай бұрын

@@SheugMcbain lol well about that, I actually used this type of “wrap” and so far it’s working

@darth_1 3 ай бұрын

Anyone else having loading issues

@devinadkins4090 3 ай бұрын

@@darth_1 only with “upland bird and small game” ammo, 1255fps

@darth_1 3 ай бұрын

@devinadkins4090 sorry I should have specified loading the tube . Or is that what you are referring

@devinadkins4090 3 ай бұрын

@@darth_1 oh you mean physically loading the shells into the mag tube ? Or the loading gate won’t load into the barrel?

@reidmitchell1980 3 ай бұрын

Whats the size for the bolt inside the stock?

@devinadkins4090 3 ай бұрын

@@reidmitchell1980 don’t remember honestly, I’d check but I threw the old stock away

@reidmitchell1980 3 ай бұрын

@devinadkins4090 I thought it was 1/4 but that's not working. I'll email them.

@devinadkins4090 3 ай бұрын

@@reidmitchell1980 I know it’s not 1/4” because it’s Turkish, it’ll be metric

@KAKL106 3 ай бұрын

did you have to drill and tap the gun receiver yourself for the sight mount or does it come tapped?

@devinadkins4090 3 ай бұрын

@@KAKL106 there is a tapped hole already there

@danielwade7.62x51 3 ай бұрын

What extension tube is that?

@devinadkins4090 3 ай бұрын

Tokarevusa.com Search for “Titan” and it’ll come up

@jamessturcke6532 3 ай бұрын

I bought 2 of these from PSA for the 109.00 sale price. Sent them back -- both were pieces of crap -- save your money and buy a nice shotgun.. Multiple feeding issues with Federal, Winchester, and Rio buck and slugs. Elevators were shoving rounds into top of receiver. PSA Customer Service was great....

@devinadkins4090 3 ай бұрын

@@jamessturcke6532 hmm, i guess they’re hit or miss, when I bought mine I lubed it and ran it…. A lot! Probably got somewhere between 350-400 rounds. Had an issue with one particular ammo I mentioned in a video but that’s it.

@jamessturcke6532 3 ай бұрын

I'm really glad yours worked. I bought one for me and one for my son. We cleaned them. Shot them wet / shot them dry - cleaned and polished until our hands were sore. I really wanted them to work - they felt good when they did....We put about 300 rounds through each before we decided to send them back. one was much worse then the other -- literally failed to feed every other shot. Thanks for your reply and the video. I know some people are having very good luck with theirs....PSA were champs -- no hassle...

@devinadkins4090 3 ай бұрын

@@jamessturcke6532 yeh psa does a pretty good job and Yw, sucks spending hard earned money on things that just don’t stack up.

@Soli_Deo_Gloria_. 2 ай бұрын

So PSA accepted guns that had already been transferred into your name and that had also been used ? Interesting... I've never heard of PSA refunding money after the transfer.... Do you have a link to the terms of sale the explicitly outline this ? @@jamessturcke6532

@blatantrefusal 3 ай бұрын

you have to do a little trimming, it took like two minutes with a dremel to get mine on. the non-pistol grip mossberg stocks fit right on.

@devinadkins4090 3 ай бұрын

@@blatantrefusal yeh I figured, especially since the magpul stock went on without an issue

@nonotreally1 3 ай бұрын

@@devinadkins4090This is correct. I got several older pistol grips I had to fit, but all required fitting. To be fair, the ATI package does say fitting may be required. SDS and Tokarev should be clearer about what stocks actually fit and that pistol grips require fitting.

@devinadkins4090 3 ай бұрын

@@nonotreally1 right, there is a lip on the pistol brace that would have to be trimmed a lot to be able to fit because of the trigger guard. Either way, now people who see my video will have an idea of what they have to do. I also didn’t want to trim it in case I got rid of it, it wouldn’t be “ damaged “

@robertpierce3455 3 ай бұрын

Where did you find the tube extension??

@devinadkins4090 3 ай бұрын

Link in description

@fordman882 3 ай бұрын

You can get mlock glashlight holders for it

@devinadkins4090 3 ай бұрын

@@fordman882 that’s correct, but it’s casts a big shadow when mounted on the mlok slots

@ethan5.56 4 ай бұрын

I’ve been thinking about buying one of these. They’re only 109 beans on PSA right now. Great video

@devinadkins4090 4 ай бұрын

@@ethan5.56 do it! Lol. Thanks for watching

@jamessturcke6532 3 ай бұрын

@humpy936 4 ай бұрын

Maybe you can add a thin lock washer to that rear sight assembly screw if blue locktite and proper torque doesn’t fix it.

@devinadkins4090 4 ай бұрын

@@humpy936 crossed my mind, that and red loctite lol

@humpy936 4 ай бұрын

@@devinadkins4090 Haha!, good luck to you, I’ve been waiting for that sight assembly to come back into stock, can’t seem to find them anywhere else besides the SDI/Tokarev site, they did have the plus two magazine extension however the only one in stock was the marine coating which I bought anyways, I could always spray paint it black but I don’t think I really care.

@devinadkins4090 4 ай бұрын

@@humpy936 yeh they’re getting more popular I think. It appears to be a decent shotgun so far

@defsteph-og 2 ай бұрын

@@humpy936they came back in stock and went out of stock again in about an hour. I managed to snag one, but it came loose after four shots 😂

@jonleone777 4 ай бұрын

I went to the craft store and picked up a self adhesive foam sheet. Cut to fit undef barrel clamp. Worked well.

@devinadkins4090 4 ай бұрын

@@jonleone777 that’s a good idea. That wrap is working at the moment, if it starts to fail, that’s what I’ll do

@Rasta1Imposta 4 ай бұрын

electrical tape works for the barrel clamp i have it on my shotgun who cares if its ghetto it works

@devinadkins4090 4 ай бұрын

@@Rasta1Imposta lol. I’ve come to that realization

@blakeproctor5199 4 ай бұрын

Where did you find the magazine extension and rear sight?

@devinadkins4090 4 ай бұрын

@@blakeproctor5199 tokarevusa.com

@drason69 3 ай бұрын

Same question. I have not read of a specific brand for these.

@blakeproctor5199 3 ай бұрын

@@drason69 I had to buy the silver mag extension from sds and I’m just going to paint it but the black ones and the rear sight are sold out everywhere! 🤦‍♂️

@devinadkins4090 3 ай бұрын

@@blakeproctor5199 it’s not sold out, I just looked. The mag extension and ghost ring sight are both in stock

@blakeproctor5199 3 ай бұрын

@@devinadkins4090 where?

@rico300zx 4 ай бұрын

how has the charging handle held up? is it the correct fit, has it got loose or fell out ?

@devinadkins4090 2 ай бұрын

Charging handle is holding up well so far. 🤞

@rico300zx 4 ай бұрын

have you solved the issue with the site moving yet? you're not the first person I've seen this happen to

@devinadkins4090 4 ай бұрын

@@rico300zx I used loctite brand blue loctite instead of the generic “thread locker”

@rico300zx 4 ай бұрын

Double sided gorilla tape cut to shape, maybe that will work for the barrel clamp?

@devinadkins4090 4 ай бұрын

@@rico300zx others have mentioned tape, I ended up using a “wrap” similar to ace bandage elastic bandage, if that makes sense lol

@danielrosas9375 4 ай бұрын

How was the install for the mag pull stock?

@devinadkins4090 4 ай бұрын

@@danielrosas9375 easy, one screw, which is the sling stud, from the butt of the stock, remove that cover/plate and then reach in and remove the bolt that holds on the factory stock Magpul stock has a piece with it that goes into the gun first, then place the stock into position and install one supplied bolt

@crazyhorseracing6130 4 ай бұрын

Is the charging handle and extension tube both from gfarmory?? Thanks for the videos!!

@devinadkins4090 4 ай бұрын

@@crazyhorseracing6130 you’re welcome Nah, just the charging handle, extension tube is straight from Tokarevusa.com

Ең жақсы KZbin

Пікірлер