14 күн бұрын
21 күн бұрын
Пікірлер
@mattvanatti9531 6 сағат бұрын
In the right hands this truck could still make someone a million dollars....workhorse
@kirbywinters1291 22 сағат бұрын
Don’t forget good battery cables and good batteries. If the cables are the original ones that came on the truck replace them.
@camdenpletcher5724 Күн бұрын
How does your starter sound like a 6.0 starter
@Shadetree7.3 Күн бұрын
I have it upgraded to a 2 bolt stater. I'm working on a 7.3 upgrades video where I'll explain the mod.
@denarireese983 2 күн бұрын
yayyy diesel abuse
@Shadetree7.3 3 күн бұрын
This engine needed a rebuild, so I decided to do some "science" before replacing it. kzbin.info/www/bejne/qmG8qqxtr5d5bas
@Lugnut-rp8 3 күн бұрын
Eth = poor mans nos
@chrisbetter9806 3 күн бұрын
It is amazing what they will take. Peg beats the hell out of his.
@bellat8448 3 күн бұрын
Are you building a new engine. Why would you do that.
@Shadetree7.3 3 күн бұрын
Yes. I explained in the first video.
@BLEnterpriseLincoln 4 күн бұрын
I have a 2 stroke Detroit that would eat all that for breakfast, laugh at you and go to work😂
@Shadetree7.3 4 күн бұрын
Those old 2 stroke Detroits were awesome! I've always wanted to get my hands on one
@nick_dizzle 4 күн бұрын
It spewed oil for like 2 mins 😮 that's a lot of oil lol
@NathanHale-r1s 4 күн бұрын
The dummy could have sold the truck running for 10 k on marketplace😂
@Shadetree7.3 4 күн бұрын
@@NathanHale-r1s with a blown headgasket? Seems dishonest to me.
@Thatrandomguyonyoutube547 4 күн бұрын
Why hurt the 7.3? I’ll take it off your hands for ya
@Shadetree7.3 4 күн бұрын
@@Thatrandomguyonyoutube547 the answer is in test video #1
@abel7.3 4 күн бұрын
Definitely lost oil pressure on injectors bro 7.3 are beast they are made under powered they basically can't make enough power to destroy themselves stock that's why they are so reliable but can easily upgrade them and keep them reliable
@Garage_Beers 4 күн бұрын
NGL at dual ether and the tachometer max’d out i about shit my pants LMAO
@Shadetree7.3 4 күн бұрын
@@Garage_Beers I couldn't see the gauge while I was doing it. I had no idea it was pegged until I went to edit the footage. 🤣
@Garage_Beers 4 күн бұрын
Oh shit! Haha. Well this is good content. Not a lot of people have the ability to do these kinds of tests. Mise well if your plan is to swap it out anyways 🤷🏼♂️
@ThePickleSlicer 4 күн бұрын
Here before this channel blows up. Great stuff!
@tjr9741 5 күн бұрын
I hope they dont ban these trucks in texas like they did in california.
@Shadetree7.3 4 күн бұрын
I doubt it. At least not for a good while. (hopefully)
@jerrybockes4769 5 күн бұрын
Wanna be zip ties and bias plies? Even got the fast idle stick
@Shadetree7.3 5 күн бұрын
👌 Mint
@jerrybockes4769 5 күн бұрын
@ peg would be proud
@Shadetree7.3 5 күн бұрын
@ He's my favorite channel on youtube. I don't wanna copy him, but there's definitely influence there.
@jerrybockes4769 4 күн бұрын
@ soon as I started watching this video I’m like this guy kinda acts like peg lol.
@dazzle3096 5 күн бұрын
Not the greatest year of the 7.3 to test but I’ll watch.
@Shadetree7.3 4 күн бұрын
What year do you want to see tested next?
@dazzle3096 4 күн бұрын
@ 96
@dazzle3096 4 күн бұрын
But all honesty I just wanted to comment, the 96 would have the same fate. Keep up with the 7.3 content. Got a dually three years ago. Best decision I’ve made.
@Shadetree7.3 4 күн бұрын
@@dazzle3096 the first 7.3 I ever had was a 96 crew cab 4x4. Great truck. I was thinking about making a comparison video between the obs and the new style 7.3s.
@mattvanatti9531 5 күн бұрын
Took way more than any dodge or Chevy ever could....what an IDIOT....
@Alex-d8p3i 5 күн бұрын
2:18 the odometer is in hieroglyphics
@Stormythecat1213 4 күн бұрын
😂 it is!
@Jesse_Drinkmilk 5 күн бұрын
Why murder a zF6?
@Shadetree7.3 5 күн бұрын
When did I hurt the transmission?
@EATSLEEPDRIVE2002 6 күн бұрын
sad to see a truck that's worked so hard to get murdered so senselessly, but I guess you can't fix stupid
@Shadetree7.3 6 күн бұрын
Don't worry she'll be fine. 😉
@emerycottle3166 5 күн бұрын
It does have 352,000 miles on it if that makes ya feel any better.
@Shadetree7.3 5 күн бұрын
@ and a blown headgasket lol.
@RiggyRonnie 6 күн бұрын
Keep up the great content, very informative, good to know since everyone talks about them. Subbed
@Shadetree7.3 6 күн бұрын
Awesome, thank you!
@PuzzleVizion_TV 6 күн бұрын
If you really want to blow it, insert diesel to the intake, it will override the governor and will run until valvefloat, or any other explosion from rods or pistons. And to help it, add some flammable fuild to help it rev even more! (Like the one at 3:16) Make it runaway! But be warned, it will possibly explode in your face, so be warned of pieces flying (or just lock from overheat). I look forward to the next endurance test!
@emerycottle3166 5 күн бұрын
Not sure if you can override the governor on a 7.3 powerstroke. As far as I know, fuel is electronically controlled.
@emerycottle3166 5 күн бұрын
I don’t know too much about these engines though
@emerycottle3166 5 күн бұрын
I mean, as far as I know, there’s no mechanical governor system, it’s all computer controlled.
@PuzzleVizion_TV 5 күн бұрын
@@emerycottle3166 Didnt know that! I thought it was mechanical.
@madjimms 6 күн бұрын
that isopropyl probably just cleaned the intake and combustion chamber lol
@collin3800 6 күн бұрын
Okay, I'll subscribe. But I want to see you thrash a GM 3800 V6, those things are indestructible.
@Shadetree7.3 6 күн бұрын
I'll add it to the list 🤣
@PuzzleVizion_TV 6 күн бұрын
Oh I've seen the video of Junkyard Digs, it was intense. I'd like to see someone retry that.
@acmadniturner1668 5 күн бұрын
Comes in Australian made commodores, rwd and cheap. Next you know they make good burnout cars.
@hunterswiski8398 5 күн бұрын
Just intake gaskets lol
@terpygames 6 күн бұрын
I ran a 7.3 with 0 oil touching the dipstick for several miles XD this is a funny video to pop up
@a.m.bgarage.everydayprojec9665 6 күн бұрын
"im gonna make this nice video showing about my beloved truck" proceeds to blow it up a week later
@Shadetree7.3 6 күн бұрын
Different truck. I have four 7.3s currently
@a.m.bgarage.everydayprojec9665 6 күн бұрын
@Shadetree7.3 gotcha. Just thought it was the same truck cause of the blue tubing.
@Shadetree7.3 6 күн бұрын
Yeah its the same truck in the thumbnail, so you were on the right track.
@a.m.bgarage.everydayprojec9665 6 күн бұрын
@ noice. Were you able to successfully blow the other truck, or did it just overheat?
@Shadetree7.3 6 күн бұрын
@@a.m.bgarage.everydayprojec9665 I guess you'll have to wait till the next video to find out. 😉
@a.m.bgarage.everydayprojec9665 6 күн бұрын
As a fellow 7.3 owner, it makes me cry to see a 7.3 being abused, but here's a little secret: You would have better luck blowing it up if you had a boost fooler. On a stock 7.3, a sensor tells the computer to cut fuel when boost gets too high. By getting a boost fooler, you can trick the system to rev higher, and if pared with a wastegate and/or blow off valve that doesn't close, you could get some serious power and RPM's, but also serious carnage.
@Shadetree7.3 6 күн бұрын
True, but that doesn't really apply in this case because; #1 there isn't enough load on the engine to create enough boost to trip the code and #2 fuel is irrelevant because I'm supplying copious amounts of ether as a fuel source. 🤣 I would need a dyno to really put a proper load on it, but I don't have one nearby. (and they probably wouldn't approve of this experiment anyway lol)
@jamesryplewski2860 4 күн бұрын
@@Shadetree7.3boost coolers are irrelevant if you know how to tune, all you need to do is unplug the wastegate
@drk_hrmn 7 күн бұрын
This was awesome. Always wanted to do something like this to a 7.3. Now for a 12v 😂
@levimilligan6856 7 күн бұрын
Love the video! Can't wait for it to go big! Huge fan of the ole 7.3
@420xwaytoomanyx420 7 күн бұрын
Phenomenal Go harder next time. You’re about to be famous. I’m serious brother -a jew in Colorado
@andy7638 7 күн бұрын
He literally pegged the tachometer how was he supposed to go harder?😂
@PuzzleVizion_TV 6 күн бұрын
@@andy7638 Make it runaway
@codkiller2025 7 күн бұрын
A greasy old one legged Canadian once said "A little redline fur a good time"
@MechanicalSymphony 7 күн бұрын
Zip Ties would approve
@Shadetree7.3 7 күн бұрын
I hope so! Peg is my favorite youtuber 👌mint
@JasonA1124 8 күн бұрын
What the hell is an RMP?
@holeshot1721 5 күн бұрын
Real mans pimpjuice !
@CalebMullins-o4t 8 күн бұрын
lowkey like a great video idk how your so underratted
@Shadetree7.3 8 күн бұрын
Thanks man! I just started uploading last week, so we'll get there with time. Appreciate the kind words 😊
@kostasdramoudanis2627 8 күн бұрын
That’s impressive I’d say what they say about them is true
@matthewthaemert3282 8 күн бұрын
Just gonna say, this is like trying to watch cash for clunkers 😅 bro is trying to be the next whistlindiesel 😂
@andy7638 8 күн бұрын
You really are trying to blow this thing up! 😂
@GoyslopGladiator 11 күн бұрын
Also make sure you run winter oil if your truck is from a warm state. Thinner oils did me dirty in Denver over Christmas.
@jmak03cobra66 7 күн бұрын
Winter oil? 😂
@TheOriginalCub 12 күн бұрын
that's not a hard start lmfao
@MrBlackbutang 14 күн бұрын
There’s no such thing as)(marine heat shrink. That’s marketing tactics. Just a higher grade of manufacturing heat shrink instead of crappie Chinese copy.
@Shadetree7.3 14 күн бұрын
@@MrBlackbutang The difference is marine heat shrink has a glue coating on the inside of the tube that promotes adhesion and creates a waterproof seal. I guess there isn't technically a marine "grade" but I wanted to stress the importance of marine heat shrink for this project. Thanks for the feedback!
@MrBlackbutang 14 күн бұрын
@ if you say so . Working in the international marine occupation 30 year . Your local public utilities companies have been using it for more than 60 years. . You must be a professional engineer?
@Shadetree7.3 14 күн бұрын
@@MrBlackbutang No sir, I'm just a regular dude who enjoys working on 7.3s. I made the distinction to help out the regular guys like me who might accidentally buy the cheap heat shrink. The easiest way to prevent confusion is to clarify that it "marine" because that's how it's labeled at common stores like lowes, harbor freight etc.
@kylenathe2807 16 күн бұрын
Literally not possible to blow up a 7.3 or 6.0 by oil starvation
@butt_nugget_223 16 күн бұрын
He kinda said that at 2:11
@kaznakoff8073 49 минут бұрын
He said that in the beginning
@genericnativeamericankid4836 16 күн бұрын
7.3 needs oil to actuat the injectors
@NuclearDom 16 күн бұрын
Definitely over-rev it, wanna see how it would react lol.
@humboldthillbilly1848 16 күн бұрын
Take it down a steep hill and overrev it. Try and see how many rpms itll take. You could also overrev it by spraying it while giving it full throttle
@Shadetree7.3 16 күн бұрын
I do have half a case of ether laying around...
@rustyshackleford1656 11 күн бұрын
Well i know for sure they’ll spin 4500 pretty consistently without blowing up, not sure if it’s physically possible to make it spin any faster even going down an hill but maybe
@humboldthillbilly1848 11 күн бұрын
@rustyshackleford1656 100% you can get more rpms out of it if you go down a hill and physically overspeed the crank. But yeah above 4500 the valve float probably governs it
@brandonruhl4525 17 күн бұрын
now why would ya do that lol
@NFSCalex 17 күн бұрын
Cool test, was happy to see it start right back up after being starved of oil. Those damn 7.3s
@aidenoleksiw7570 17 күн бұрын
Screw you for destroying a engine a lot of people would die to have
@Shadetree7.3 17 күн бұрын
The engine already needs a head gasket, so I figured I'd get some final use out of it for science!
@zacharythomas3253 17 күн бұрын
Freaking Gorgeous!