Пікірлер
@chiang-hengchien7018 2 ай бұрын
Which NVIDIA Orin does it support? Jetson Orin Nano? Orin NX? AGX Orin?
@TechNexion Ай бұрын
The demo features a NVidia Orin NX. We support jetpack 6.1 as of October 2024
@mujahidali2369 5 ай бұрын
well that awsome
@vadimpanin1551 Жыл бұрын
Great tutorial, thanks for your efforts. I do have a question about serial booting from USB. I am building a custom carrier board based on EDM-G-I.MX8M-PLUS SoM and I am planning to use the USB-OTG port for both powering the board and data transfer. I wonder if it is possible for me to use USB PD and US3.0 at the same time.
@TechNexion Жыл бұрын
Certainly you can but keep in mind that you won't have 2 power sources in your product.
@ericnelson5026 Жыл бұрын
Nicely done John. Using an LED is an obvious source to remove display refresh from the test. Once you mentioned it... ;)
@ZirJo Жыл бұрын
Very well explained! Thank you so much
@AbhiSankhlaAB Жыл бұрын
I was wondering if I can run Octoprint in this controller? Also is there any linux image available to download and install directly?
@TechNexion Жыл бұрын
We provide demo images for yocto Ubuntu or android at download.technexion.com
@AbhiSankhlaAB Жыл бұрын
@@TechNexion I will try the same. Another question, my device is stuck at NXP screen and not moving past that(I am starting it for the first time) tried reaching support email but got no response so far.
@TechNexion Жыл бұрын
Install the TechNexion Software Loader. You probably received a NXP Android Things Kit. You will have to get that software removed from your kit first and after that you will be fine. You can refer to the online Android Things pages from Google.
@ZafarIqbal-oz6mf 2 жыл бұрын
Great, but concurrent mode was not shown
@TechNexion 2 жыл бұрын
We have that in a seperate video : kzbin.info/www/bejne/qaq5e5-JlKuJopI
@natsagnyamnamkhai749 2 жыл бұрын
many thanks
@游東樺-t1c 2 жыл бұрын
The video is so awesome, especially for the YOCTO learner.
@robv3872 2 жыл бұрын
Thank you for your videos! They are great and you are a fantastic speaker! Please make more!!
@robv3872 2 жыл бұрын
You are fantastic and should make more videos! Thank you very much!
@muralikrishna2086 2 жыл бұрын
what is version of linux kernel after the process...(5.4 to 5.6)...?????
@TechNexion 2 жыл бұрын
Murali, sorry for the slow reply. You can find all sourcecode on our github : www.github.com/technexion
@muralikrishna2086 2 жыл бұрын
@@TechNexion ThanQ
@royazriel2000 2 жыл бұрын
Great video. where can I find uuu_flash ?
@TechNexion 2 жыл бұрын
You can find all tools on our developer.technexion.com page. The uuu utility itself can be found easily on our download server here : download.technexion.com/development_resources/development_tools/installer/
@natrixnatrix 2 жыл бұрын
Have been trying to use the MFDTool with a pico pi imx7d and flashing the wayland yocto bsp. It worked once but if I try to reflash it with the same images, commands and configuration then it just gets stuck in a loop constantly resetting when trying to write the rootfs image. Edit: I think the issue is caused either by windows or bad signal integrity for the usb connection. Connecting the USB directly to the computer instead of a through a hub managed to get it working again. A bit strange since I did manage to flash through the hub before.
@i-negm 2 жыл бұрын
Thanks a lot, really helpful and good quality tutorial. Loved it!
@matthewgrose7489 2 жыл бұрын
Fun fact: you sound like Seth Rogen
@SasukeUchiha-mj2vh 2 жыл бұрын
The Wi-fi doesn't work. Missing some *.ini file at booting. Tryed older version of Ubuntu (zeus). same problem on three boards. can your engineers help us?
@TechNexion 2 жыл бұрын
If you work with sourcecode you will have to contact [email protected] and request the wireless firmware. This is documented in the sourcecode notes.
@briansharp4109 2 жыл бұрын
Is there something I have to do out-of-the-box to get video/power output to the LVDS display? I've got one of these plus the VL101-12880YL-C13 panel, and just plugging the panel in and power it all up, I get no video to the panel - but HDMI output works. Is there something I have to do to set video output to LVDS as primary or something? Thanks.
@TechNexion 2 жыл бұрын
Brian, work with sourcecode and have your dts set correctly to have your LVDS display enabled will do the trick. You can find our sourcecode on www.github.com/technexion/
@deepakraj-si1nl 3 жыл бұрын
thanks ,this was great video ,it helps a lot
@mpiccolino-tealblue 3 жыл бұрын
Thanks for the video. In case of a TEP device, can the USB-C OTG port be used for ums, or rather the RS-232 port?
@TechNexion 3 жыл бұрын
You can easily load images over the USB-C or with a SD card when using the S1 button to force a boot from the removable media.
@deepakraj-si1nl 3 жыл бұрын
how can we download images in emmc using uuu cmd ? is this is out ?
@TechNexion 3 жыл бұрын
Head over to our developer page at developer.technexion.com The article you are looking for is here : developer.technexion.com/docs/using-uuu-to-flash-emmc
@deepakraj-si1nl 3 жыл бұрын
hii ,can we flash android images in imx emmc using uuu ?
@TechNexion 3 жыл бұрын
Head over to our developer page at developer.technexion.com The article you are looking for is here : developer.technexion.com/docs/using-uuu-to-flash-emmc
@bobbyboygaming2157 3 жыл бұрын
can this module be plugged into the RPI compute module 3 IO board?
@TechNexion 3 жыл бұрын
RPI module pinout is only for RPI module. Our modules are based on EDM Standard and they bring out a large number of industrial interfaces and different display/camera options that RPI unfortunately doesn't offer. Both products are interesting of course. The EDM modules focus is however more on industrial and embedded applications and offers more open control on the bootloader and other interfaces to integrate this in your project.
@ivanlemos3799 3 жыл бұрын
Thanks man, nice videos. I have started this year with yocto and you are doing an awesome job teaching this content
@ivanlemos3799 3 жыл бұрын
Thanks man
@ivanlemos3799 3 жыл бұрын
Thank you
@zafareff 3 жыл бұрын
Thanks a lot for this, can we automate this in YOCTO at every boot
@narendran936 3 жыл бұрын
Hi, your videos are helping us a lot to understand the yocto projects. If it is possible can you make vedio on auto login and auto run application.
@TechNexion 3 жыл бұрын
Hi, We just added a video on this subject : kzbin.info/www/bejne/aIKlhWttnL90epo
@kathiravankathir3089 3 жыл бұрын
Nice.
@parasbhanot 3 жыл бұрын
can you make video about creating custom distribution ?
@lukaszgrzesiak4292 3 жыл бұрын
Can somebody please tell me how to put edm-g-imx8mp board into serial boot? Is the SW1 switch supposed to be positioned at 1 or ON? DO I press the Button1 while I plug the power supply to the board?
@TechNexion 3 жыл бұрын
When you use the WB-EDM-G baseboard. You will find a button and a switch next to the DC power jack. For the Switch. LEFT position is EMMC boot. RIGHT position is removable storage boot (SD card boot) The button is to put the board in Serial Boot configuration and you should keep it pressed for 10 seconds from the moment you apply power to the board. Therefore when you want to flash over USB. You should put the switch to the RIGHT position. Press the button before you apply power to the board (keep it pressed down for 10 seconds). After you flash. Return the switch to the LEFT position to boot from the EMMC and your newly flashed image will boot on next power cycle.
@juraanji5319 3 жыл бұрын
@TechNexion, can you share these tutorial codes?
@yunushkin88 3 жыл бұрын
Hello!!! Please tell me where to find documentation on how to make a boot disk how to flash and how to work with this board in general (Android, Linux, Yocto, Ubuntu). Previously, there was a good documentation on the steps everything was described.
@TechNexion 3 жыл бұрын
You can find all documentation, software links at the bottom of the product page at : www.technexion.com/products/system-on-modules/pico/pico-imx7/
@electro2001 3 жыл бұрын
Good work!
@Gudemaranahalli 3 жыл бұрын
This is awesome Marcel. Looks simple and easy to use
@huongtruongthi2401 3 жыл бұрын
Please help me, when I first time start up the system, there's no operating system to choose. It stucked at the empty operating system screen after system check.
@TechNexion 3 жыл бұрын
Make sure you download the latest TechNexion Software Loader and have that running on your product. Also make sure you are connected to the internet with a LAN cable. In the new software loader that is easily to see while looking at the connection icon in the right top corner of the display
@Sagittarius181284 3 жыл бұрын
When i first time start the system up, there’s no operating systen on the screen to choose. What should I do?
@TechNexion 3 жыл бұрын
Make sure you download the latest TechNexion Software Loader and have that running on your product. Also make sure you are connected to the internet with a LAN cable. In the new software loader that is easily to see while looking at the connection icon in the right top corner of the display
@pratikfarkase4746 4 жыл бұрын
Superb!! Really great platform
@pratikfarkase4746 4 жыл бұрын
Superb guys! Good work. John i tried connecting you on Linkedin.
@pratikfarkase4746 4 жыл бұрын
Superb!!
@TechNexion 4 жыл бұрын
Happy to hear you liked it.
@hakahu1010 4 жыл бұрын
Awsome. Very detailed instructions.
@TechNexion 4 жыл бұрын
Glad you liked it
@steameier8590 4 жыл бұрын
Is the Wizardboard available for enduser in europe?
@TechNexion 4 жыл бұрын
Certainly. You can find it in our online shop and get one... Or multiple ones hahaha
@hkasistan2842 4 жыл бұрын
How many amps is required to work with a 5v power bank (camera and wifi will use everything)
@TechNexion 4 жыл бұрын
We recommend to use a 3amps 5volt adaptor when connecting display and all add-on accessories
@hkasistan2842 4 жыл бұрын
Hello, How many amps is required to work with a 5v power bank (camera and wifi will use everything)
@TechNexion 4 жыл бұрын
Hi, we recommend to use a 3A power adaptor to make sure you have enough power when you connect a USB device to the board or other peripherals that need power.
@hkasistan2842 4 жыл бұрын
I want to make a 3D printer. Do you have STL file ready
@TechNexion 4 жыл бұрын
Sure. Goto our homepage. You can find the file in our support section.
@hkasistan2842 4 жыл бұрын
How many amps is required to work with a 5v power bank (camera and wifi will use everything)
@TechNexion 4 жыл бұрын
Hi, we recommend to use a 3A power adaptor to make sure you have enough power when you connect a USB device to the board or other peripherals that need power.
@Vik_ru 4 жыл бұрын
Ну молодцы, молодцы!
@arturo182 4 жыл бұрын
Nice HW! One note: "Qt" is pronounced "cute" en.wikipedia.org/wiki/Qt_(software)
@QtStudios 5 жыл бұрын
Nice video!! Thanks for creating this. Just a small correction it is "Boot2Qt" :)