Thank you! That was easy like you said 😊

Did you remove your transmission?

How much of the can you need to spray off in the catalityc?? And how much time you need to wait before to turn on the car again?

I have the same car but it has a problem when I move the steering wheel it accelerates

Thanks to KZbin university I won’t get pulled over by the cops no more ✊🏾

Changed water pump in truck, new thermostat, new coolant reservoir, and it still says it’s overheating. What could be the issue? It’s a 2013 Chevy Silverado.

so nice

Is that really easier than taking the air filter box out?

I don't usually comment on videos. But this worked like charm. Probably saved me a small fortune. Thank you.

I think I'm doing too much. I like to clean the bracket and caliper to where I can work on it and my hands aren't dirty. My jobs look like new calipers got installed Everytime. I don't get flack for it cause I'm fast AD boy...

There is an O-ring there P/N 91319-PR3-003. Acura shop manual also says to apply some liquid gasket on the threads. Torque to 16lb-ft.

Filters in this position as is on my Toyota Scion cars, I would prefill filter with oil to avoid dry starts. Don't have to go crazy.

Bright lights create a hazard by blinding people. The only reason to have lights that bright is if you're a paranoid drug addict that has windows tinted so dark you can't see out of them at night.

Honda parts departments charge $1700 for this catalytic convertor while Magnaflow charges $536....Avoid the dealer at all cost !

What is the first tool you used called that released the tensioner

How do I know if my Compressor is doing low pumping?

Hey Ralph Bob The Mechanic!, what are the torque specs for the valve cover gaskets for a 93 4Runner V6 3.0L?

It’s 20° snow and ice everywhere. I’m stuck outside changing my wife’s alternator right now. Have no idea what I’m doing but appreciate the video. Help me a lot.

lol dumb or another rip off mechanic don’t drain or remove fan. Just loosen and pull back radiator to get clearance.

I have a 2011 CRZ hybrid. Can i replace ONLY THE BELT?

A little late, but do ypu remeber how that axle performed a year later

I have code P0133 and P2A00, any ideas?

Great machine.

Awesome video very helpful RB :) My issue is when i first start the car (2007 Civic) , AC icey cold every time. After about 5 minutes or so of driving the compressor clutch disengages and the cold air stops flowing. Only way to get AC again is to turn the car off and leave for 10 - 15 mimutes then start up and AC works normally again, for about 5 minutes of driving then compressor clutch disengages... Have replaced fuses, relays and freon. Same issue. :( Any ideas?

My wife's jeep climate control is blinking? Trying to figure what part is bad?

Does it smell like burning plastic

Thank you. I really appreciate you taking the time to create this content.

My ear knotches, dont go in as easy

Does this guys know what dry steering is?

I used 1 bottle awhile back on a 1.8 Honda civic and light was off for close to a month and came back on. I’m wondering if I should clean it again with 2 bottles this time.

I disconnected all 6 sensors on my 08 honds crv and the alarm still goes on

Why don't you switch out the fans when you take out the radiator?

I was stuck at the same STUPID positive terminal!! Thank you. Just had to tap a lot to spread it.

Hey bro I was getting the same symptoms replaced the starter and did the same thing no start just clicking.

Thanks! Gotta do this over the weekend. You made it very easy to understand.

If fluid does happen to come out, do you need to add more somewhere? or is that a sign the transmission was over filled?

Thank you! I followed your instructions and saved hundreds - it took lest than 15 minutes to install. I ordered my mirror from amazon, it included a black cover. To be on the save side I ordered a white cover, glad I did.

Waccuum line?

What's problem why my car take too long warm up or heat go up slowly. (Its Coolants temperatures sensor or Thermostat)

AND THEN, MAKE SURE YOU HAVE A BRAND NEW SPRAY CAN... jAJAJAAAAA 1:35

I have all those lights on,2013 Accord LX it got the codes P0420, and 81-20. I’m trying to get the abs control module replaced, would this fix the lights? Or does the oxygen sensor need to be replaced as well? I was suggested to flush the brake fluid that it might fix it but I feel lost.

Hi do you have a part number for the resistor?

I have a 2013 its squirting fluids out of that part. Mine sits horizontal not like the one in your video. The part looks the same just positioning is different. If i replace that part do i replace the fliter too and rings like you showed?

Excellent to the point and well explained! Ty!

What engine is this? The turbo?

As a fellow mechanic, you’re a life Saver 3 years later, and I haven’t even started the job yet😂

Replaced the latch twice and it’ll work a couple times then stop working. Any advice on what to do next?

@RBTheMechanic - Do a video on removing the Oil Pan for 2013 Honda Accord LX

Thank you

Accord 2005 v6?