Thanks for posting the video and explaining how you fixed the leak. I had the same issue on the supply hose that runs from the tank to the fuel filter; a tear in the line due it to being too long and not secured properly causing damage to the line after excessive vibration. Do you recall what the inner diameter of the new replacement hose used in the video was?

Tengo uno, y a pesar de ser muy antiguo da menos fallas que mi axial scx10 ii

Thanks for your video. Looks like it's a nice piece of kit. I just bought one already assembled that had never been driven. Had a first test drive and everything works thankfully. Now I'm gonna open it up and grease it like you did. If you read this, how is your experience with this rig? I'd like to put overdrive in it if possible.

@RCMechanicGarage Im putting a 2.5 in a older jeep and dont need power steering. Do you have old setup you took off the 2.5 and would you like to sell it? Thanks

Definitely springs out the shocks

10 + yrs old why.. they were never great rigs..

Vaterra is such a cool product too bad it got cancelled. I guess it made axial fan boys too uncomfortable 😅

Que chasis usas en este video?

Hola te escribo desde chile, acabo de ver tu proyecto, estoy en algo similar, mismo body comanche. He usado los soportes del mismo body a chasis, 2barras de metal que trae el kit. Sobre los imanes, que sucede si impacta fuerte de frente el Rc, se separa del chasis? Porque razón no usar los soportes que trae el body? Saludos

I really appreciate you making this video. Now I'm going to tackle doing this on my own 5ive 👍

Thank you for this! This isn’t talked about at all on any other videos, they just throw in the new servo and call that good. Did my first servo today and couldn’t figure out why my alignment was off by one notch

RIP Diffs💯🤣

What size steering servo linkage are you using? Will the stock one work?

I really like that truck, the flat bed is cool! I have used clear nail polish a very little does the trick. I use the blue locktite now I only use a very small amount on the top 2 threads next to the screw head that way the locktite doesn’t get all over the inside of the screw hole it holds but easier to break loose. I learned that the hard way lol.

Everything but srerring omg

What is the Alternative gear to replace the differential gear🙏🏻

Cool

Nice ride good details

I need the side runners and a winch and I'll be good to go. My next build is RedCat Everest 10 which I got gave to me I just gotta put it together.

Nice looking body I got the same one. I ended up repainting mine to almost a gun metal color. I left out the front windows and added some awesome decals to the body. I got a helluva light kit red blue and white also installed and back bumper with lights and a good size front bumper that came with 4 5mm lights. It's starting to look nice. Heck it should I probably got $700 bucks in it 😭 I'm just waiting on the upper and lower linkages. If you got IG I'll send you some pics. Great Job by the way the rig looks nice!!

I really need help with the upper and lower chassis setup

Can you make a video on the upper and lower linkage setup. I need to know which link goes where. I have looked everywhere online and i cant find a video.

That's a nice one! I wonder when they are gonna put carry handles on these things?

I really appreciate your videos, enjoy watch someone actually performing grades and fixes . Thanks, and looking forward to more

Dang bro! I can’t believe you still have that truck!! I used to bash the snot out of it!!! You got that thing fast!! I kinda miss the hobby sometimes!! Too bad we don’t have any courses around here anymore….Dusty!

Awesome truck ❤❤❤

Man, that thing is fast!

Hi. This is unrelated, but what transmission/transfer case did you use on your HG-P407? Thanks in advance.

What transmission/transfer case is that.

Hi thanks for the Video...may i ask how to wired installed?

When re installing the coil is there supposed to be a gap we're the magnet touches

FIRST!!!!

Just bought the same kit from amazon and installed it on my white toyato, and it was a fun install, and looks great! Thanks for the vid. I do wish the light kit had a few more 3mm orange and a 3mm white to help fill the remaining 3mm toyato holes. I have white/blue up front. Orsnge front sides, and red in back. Thanks again!

I just moved to Louisiana by way of Barksdale AFB. As soon as I get a car I’m heading over there haha.

Red white and blue 🍺

What size hoses did you get?

LOOKIN FORWARD TO NEW VIDEOS SOON .. I LIVE IN ARIZONA SO I KNOW ABOUT HEAT 🤯🤯🥵🥵🤙🤙🤙🤙🤙🤙🤙🇺🇸🇺🇸🇺🇸

Mine pumped out and I watched the gas needle dropped within secs! I immediately got the water hose out and sprayed my driveway. Is this expensive to repair ? I can’t do it but if I take to Jeep what cost am I likely looking at if you don’t mind giving me an idea please

Do you have the 95 XJ Jeep Wrangler?

nice!

Price 🤔🤔

starting to come together man 🤘

Great video. How did you end up getting the RC4WD 12mm hex adapter kit rear axle to fit in the rear axle housing’s? Looked up and down your videos and could not find what your final solution was for the wheel 12 mm hex conversion kit rear axle problem was remedied. How did you end up making the rear axle work? Thank you so much.

I have the poison spider it is a great rig, I have Vanquish axle housing front and back and Vanquish inners

I just subscribed, I’ll follow for more Like to see what you do with the YJ.

Hard to explain?? If you have to explain a ultra sonic cleaner to anyone and they do not know what it is they need to educate themselves.

My dad used to buy the gallons of WD-40 for his mower shop. I wonder how that would work in it?

We should see what it would take to run power to your shop from the solar panels. Just a thought.

what color is that body??????????????????? please.

its always good news to not find any damage 😁 hopefully today i can get my vaterra ascender out and play in the mud 🤘