Bruno Silva

Пікірлер

@grasstreefarmer Ай бұрын

Cool stream. I always like seeing good value tools and gadgets that people have tried out.

@Lab4450com Ай бұрын

love the shirt!

@larx4074 Ай бұрын

Excellent work Bruno, how much would it cost to print one of these for my AA S410?? Cheerz, Alan

@bmsprecision Ай бұрын

Take a look at my facebook page and send me message there. Facebook.com/bmsprecision Or email me at [email protected]

@hoppynaki 2 ай бұрын

Hi Bruno. I learned so much from this. Thanks so much.

@HReality 2 ай бұрын

So, not a Doron.. took an Anycubic and Klipperized it. Could you possibly hang your macros where I could view them? Having a bear of a time.

@bmsprecision 2 ай бұрын

sure, I can, just placed them on my github: github.com/vakeiros/Doron-Velta-MODS

@trt969 2 ай бұрын

Hello, in Which video you set up and calibrate the offsets? Also, are u Brazilian?

@bmsprecision 2 ай бұрын

@@trt969 hello, im portuguese. I set the offsets in 2 videos at least. You mean the nozzle offsets right? I set them the first time either on part 23 or 24 and I'll do them again at beginning of part25

@trt969 2 ай бұрын

@@bmsprecision Obrigado pelos vídeos, eu estava com várias dúvidas e assistindo dois vídeos já consegui entender várias coisas que eu não estava entendendo. Vou assistir aos outros vídeos, obrigado!

@bmsprecision 2 ай бұрын

@@trt969 sem problems, qualquer duvida nao hesite em perguntar

@ogmaker 2 ай бұрын

Hi Bruno

@mikesantti5648 2 ай бұрын

So bottom line, what is the cost of this fantastic build.

@bmsprecision 2 ай бұрын

@@mikesantti5648 hi Mike, well it depends on what you make the heads of, considerado this, full v2.4 kit, 2 extra motors for lift arm, about 3.5m of 2020 frame, 2 drivers, 350w extra PSU, 3 spools os filament. Then the heads, stealth changer itself hardware is cheap like 20 Bucks per head then you have can bus board, extruder, fans, hotend. You can go from 85-90 bucks per head if you go ebb36, BMG extruder, cheap v6 hotend like mine and GDSTime ball fans. Up to whatever if you go with fancy hotends and extruders. Food thing is you can Stuart with just one head and increase the as you want/can

@clint.johnson 2 ай бұрын

Question for you, I assume you are using printed liftbar gears. I have started accumulating parts and printing parts to do this project but those plastic gears seam to be a likely point of failure. Any idea if they could be machined from the models using PCBWay or a similar shop, or do you know if such metal gears exist already in the market?

@bmsprecision 2 ай бұрын

@@clint.johnson hi, well yes I'm using printed gears but I did some testing before the build and with a single gear printed in ASA, moving 6kg up and down on a jig I made for 5days, day and night at highest speed I could... After that I disassembled it and zero sign of wear, I mean ZERO Now in the build its 2 gear boxes and the weight is 2kg. I think it will be fine. I could machine the gears myself but I saw no need

@clint.johnson 2 ай бұрын

@@bmsprecision That's really good data. Thanks for that info.

@JBCool0729 2 ай бұрын

6 hours of that garbage.

@bmsprecision 2 ай бұрын

@@JBCool0729 hi there, yeah these things take time, you're not forced to watch it, but I'm thorough and it's meant to help anyone doing the same or equivalent project. Thanks for stepping by :)

@हधसदहदहदवदह 2 ай бұрын

@JBCool0729 if you dont like it then dont watch it

@youtubehandlesux 2 ай бұрын

Nice way of describing yourself

@josephbejm3463 2 ай бұрын

@@youtubehandlesux It's my opinion

@josephbejm3463 2 ай бұрын

@@हधसदहदहदवदह I did not.

@Richard-ys2ns 2 ай бұрын

Be amazing if you could just do a pre loaded filament nozzle swap using this system instead of a whole head change. I guess you'd need an extruder with an open front end where the gears would open during loading then close around the filament.

@bmsprecision 2 ай бұрын

nahhh, toolhead change is the way to do it, specially if you work with multimaterials so you don't have cross contamination and less purge. if you want filament swap there are other solutions like ERCF or TradRack. here is about speed, cross contamination on different materials and reliability.

@maarsellow 2 ай бұрын

That thing is so cool. Is it possible to combine one printhead with the rabbit filament changer?

@bmsprecision 2 ай бұрын

@@maarsellow it should be... But 6 heads plus ERCF its linda overkill lol

@maarsellow 2 ай бұрын

@@bmsprecision true. I was just curious 🤓

@bmsprecision 2 ай бұрын

@@maarsellow in theory you could add one ERCF on each head lol

@TruWrecks 3 ай бұрын

Why not make a new mount for the EBB36 that sits higher. That solves the spacing issue. And it is the least amount of work.

@bmsprecision 3 ай бұрын

I was trying to avoid that because I need one of each color and in the end I managed to make it work but yeah it would be the second best solution... best would be the smaller PCB, next would be modifying the mount and last modify the extruder spacer.

@TruWrecks 3 ай бұрын

The carbon fiber layers for the printer bed is a bad idea. It will not heat evenly, and it will delamenate after several heat cycles. Also, carbon fiber is a better insulator than conductor. It will prevent a lot of heat transfer to the build plate.

@bmsprecision 3 ай бұрын

yeah, the guy seems to be set to make that mistake, I forgot the heat eveness its also another setback... thermal conductivity and degradation with heat are good enough reasons already.... I told him its a BAD idea from the beginning but... thanks for the input!

@nadir3D 3 ай бұрын

thanks for the support brother. i have checked the resistors and i found a problem.

@bmsprecision 3 ай бұрын

@@nadir3D great! Glad I could help!

@gungriffonbr 3 ай бұрын

não encontro no github oficial dessa delta as cantoneiras do perfil vertical 2020 sabe aonde posso encontrar?

@bmsprecision 3 ай бұрын

as verticais são 2040, actualmente não sei onde comprar, eu sou de Portugal. procure no google por perfil 2040 da sua zona

@gungriffonbr 3 ай бұрын

@@bmsprecision me refiro as cantoneiras impressas mas nesta noite achei num fork do projeto as partes q eu precisava para adaptar numa delta pulley

@bmsprecision 3 ай бұрын

@@gungriffonbr ahh as forras, o CAD tem todos as peças é so abrir e exportar as peças em STL. Não sei o estado actual do projecto mas amanhã posso ver.

@hoppynaki 3 ай бұрын

Love your work. You are so thorough.

@bmsprecision 3 ай бұрын

thank you very much! it's nice to know at least one person likes it :)

@hoppynaki 3 ай бұрын

@@bmsprecision I have just started building a 2.4 and I want to upgrade it to a tool changer. Your videos are very detailed so I'm following you with great interest. I very much appreciate your contribution to the 3D Printer community. I'm an old retired guy. I could not do this without your help. Kindest regards from an NZ Kiwi.

@bmsprecision 3 ай бұрын

@@hoppynaki glad to hear it, 2.4 is a great printer. if you have any questions or doubts just ask here and I'll either answer here or on stream since I built many printers already and I may skip some steps or info on some stuff I may fin obvious already. and again thank you for the interest

@Mijo0x9 3 ай бұрын

Looks like a fun project, wanted to go maker a larger format 3D printer (About 1.5M X 1.5M X 2M) but the design was too complex. Goodluck with your printer tho! Would love to see the end result!

@Petricius 3 ай бұрын

Hi, do you have link to the toolchanger?

@bmsprecision 3 ай бұрын

hello, I added links in the description

@Petricius 3 ай бұрын

@@bmsprecision Thanks

@Lab4450com 5 ай бұрын

proxima live?

@Lab4450com 5 ай бұрын

LOOKING AWESOME!

@JoaoPaulo-ig7ed 6 ай бұрын

I liked too! Belo projeto, a arma ficou espetacular. Abraço

@endurosl20081 6 ай бұрын

Espetacular Bruno. Vou partilhar nas minhas paginas todas.

@bmsprecision 6 ай бұрын

obrigado pelo comentário e apoio :)

@dzl2716 Жыл бұрын

Would it be possible for you to make me one of these stocks pls!

@bmsprecision Жыл бұрын

sure, take a look at facebook.com/bmsprecision

@bmsprecision Жыл бұрын

@@dzl2716 send me email to [email protected]

@mayurgogoi7886 2 жыл бұрын

help same problem all led turned red while trying to on no sound nothing just all led turn red please help me

@rafaesposito7796 3 жыл бұрын

Hi Bruno, do you have the post processor for the 3 Axis mach3 for solidcam? I thank you in advance. God bless you

@bmsprecision 3 жыл бұрын

been a long time since I used solidcam... I switched to Fusion360 about 4 years ago so I don't have anything from solidcam now. but I sure its easy to find with a bit of googling

@rafaesposito7796 3 жыл бұрын

@@bmsprecision ok, thanks

@Kompound_Machining 4 жыл бұрын

Nice work. What grooving tool are you using on the prong grooves. And also speeds and feeds

@ryanwilson403 3 жыл бұрын

For real, I’m running some grooves like that soon.

@Faysal-fe3dk 4 жыл бұрын

Carry on

@JGSairguns 5 жыл бұрын

Fantástico! Quanto custa uma coronha assim?

@bmsprecision 5 жыл бұрын

Depende dos acessórios. Pode contactar-me [email protected]

@levergunn405 5 жыл бұрын

SPEAK!!!!!

@danielpeixoto9641 6 жыл бұрын

Boa tarde meu amigo acabei de me escrever no canal.vc poderia nos passar os matérias que vc usou pra fazer.todos nós agradecemos

@antonellomastropierro4418 6 жыл бұрын

Wow fantastic stock

@valtaircardoso7215 7 жыл бұрын

boa tarde bruno e possivel compra essa luneta de visao noturna???

@valtaircardoso7215 7 жыл бұрын

boa noite Bruno silva como para ver mais modelos de suas lunetas?

@rinaldomuniz9290 7 жыл бұрын

Amigo como é que eu faço pra comprar um equipamento dese

@rinaldomuniz9290 7 жыл бұрын

Bom dia amigo você faz pra vender

@bmsprecision 7 жыл бұрын

viva, sim faço, este modelo já está longe dos mais recentes. pode contactar-me para [email protected]

@9924andreas 7 жыл бұрын

Where to buy this knee riser?

@bmsprecision 7 жыл бұрын

you can get in touch with me via facebook: facebook.com/bmsprecision or bmsilva87.wixsite.com/bmsilvaservices

@adolfosi 7 жыл бұрын

Opa bruno, blz? eu peguei seu vídeo em um topico de Solid Cam e MACH3 eu tenho uma cnc 3 eixos e queria fazer funcionar do solidcam pra ela.. vc tem o pos processador? estou começando a usar o solid. pois o artcam nao atende algumas nececidades que faço em 3d e gostaria de testar com o solidcam... se puderes me dar uma ajuda fico imensamente grato!

@bmsprecision 7 жыл бұрын

viva, sim claro. para 3 eixos há por aí bastantes que funcionam bem, manda-me o teu email que envio o PP

@StarflightVirtual 8 жыл бұрын

Hello,have you also the Machinesimulation Files ( maybe for a 3040T China Router) ?Thanks

@bmsprecision 8 жыл бұрын

I've the simulation files from my home made machine that I made myself, I've a video that's very helpfull on this regard, I'd download it here from youtube but can't find it anymore... I'll try to upload it here and send the link

@StarflightVirtual 8 жыл бұрын

thanks...that would be great!