When you are putting the paper in is it grabbing the paper. I found you have to make sure you push the paper in far enough that it grabs the paper for it to detect it. Once it grabs it, works fine.

​@@DanReviewsStuffit grabs it when i click on print and then it says that there is no paper. When I just push the paper in as far as I can it doesn't grab it

@petrasijarto7502 hmm that is really weird. Seems like it should detect the paper then. I’m not sure what’s going on. Might need to reach out to their support so see if they can help.

Awesome, yeah I love mine. Simple and effective. 🤙

I’m not sure how to test that. But the higher definition files I print are crisp visually.

Yeah, you could do that by hooking it up to the computer.

Yeah you need to make sure to use thermal paper for it. Otherwise it won’t work.

Yes, it’s important to keep the trim though as the top uses those for the tabs. I kept mine, but have heard some people just cut it off so you don’t need to disassemble the door. I’m not sure if there are any other ways to take off the net.

So the bottom clamp is your main source of holding it onto the stand. It has pads on the inside and you can use a screwdriver to really tighten down the clamp to the speakers. I find that it holds the speakers on very nice and snug. Even when I used the wall anchors and it fell out of the wall, everything stayed connected after the fall about 3-4 feet. I have not tested any extreme angles though and I would also assumed speaker size and design may make this a variable experience.

Hi, I will install klipsch r51m ,I believe it's 6 kilos , so you think it can hold it? Thanks

@@Formola-h8h This looks to be the same speakers I have, it would work great. Just make sure you mount into studs, not wall anchors like I did the first time.

Hey! You just need to download and install the drivers from here: www.idprt.com/Driver/ Then it should works as expected! Good Luck!

@@DanReviewsStuff I tried but i can't find the right driver for mac

On the page look for “iDPRT MT610 Pro” and when you click on it, download the “Mac” option.

This one does not come with a tray, there are a lot of different options for portable printers, I am sure they make one, but it might just be a little larger in size to accommodate the tray. These pages I show are not perforated, the printer rollers pull them through. It does have a lighter paper weight feeling lighter than normal printer paper.

This one does not have a strobe.

Great question, this does not show Amps from what I have seen in settings.

You can but I am not sure the best way to it. I googled it real quick and see a lot of people cutting them. My other guess would be taking off the door panel and remove it from behind. It is important that the trim piece stays there since that is were it hooks into.

I have not used it for that case, but with the amount of great reviews this thing has, I would assume its a good option. The more fine you want the coffee the longer you let it grind. You can make it a little chunky to pretty fine based on the length of grinding.

Hope you enjoy it as much as I do!

Yeap! Great for kids, small spaces, or even to take with for offroading/outdoor adventures.

Glad it helped. We love it and use it all the time.

Purchased with my own money. Use it weekly for cold brew. It’s got over 18.7k reviews and advertised as a “coffee grinder”. Not sure where you have your info coming from, could you share some more insight?

This wouldn’t be the best for drawling. It’s more for touch type activities and games.

Sorry for the delay. Based on the listing "Closed bed dimensions are 36.6” high, 64.1” wide & 26.4″ deep and open dimensions are 25.7” high, 64.1” wide, and 80.3″ deep."

@ thank you!

Yeah, but a traditional one does not work for my case. So this is a great alternative!

My understanding is this does not work with power seats unfortunately.

Awesome!

Thanks for the history lesson! Good info.

and this is why I read comments on KZbin videos. Great history lesson.

Yeah, not cheap, but if you use it, it’s worth the money.

@@DanReviewsStuff When you can get a decent murphy bed for a small fraction of the price, probably not lol.

To each their own 🤙

@@DanReviewsStuff If you've got the money to burn I guess.

You know what, now that you say it. Very valid point 😂😂 hindsight is 20/20

It’s not for everyone! Works great for what I need ✌🏻

Hi Pam, sorry for the delay. You can search "tri fold matress" and you should find plenty of results. Here is example results on Amazon amzn.to/41nanUO (affiliate link).

Yeah, so it does have a little play. The bolts were all the way tight. This does not actually connect to the center console, instead by building it inside the console makes it too big to be removed from the console effectively keeping it locked in the console. For me I don’t have concerns about it coming out. I’ve had other safes that used a self tapping screw on the inside and would sink into the console plastic. Could be done for piece of mind, but don’t think it’s necessary.

@@DanReviewsStuff I assume it will be rattling like hell as I drove around the bumpy streets of Chicago and I'd end up going crazy, so if that's as tight as it gets, I guess I'll have to pass on it. You can't beat that price though.

@@jamesorsby7553make sense. I don’t notice any rattle, but definitely want to make sure what you choose to get meets your expectations!

@@jamesorsby7553 Mine doesn't rattle at all, whether going down the road or wheeling. Mine was a bit of a pain to get installed - it was a very tight fit and was a bit frustrating. Once installed though, mine doesn't move.

@jaredbennett1527 did you remove the bottom pad before installing like I did in the video? When I tried before doing that seemed like I was in mission impossible. Could have got it if I kept trying, but waaayyy easier with it removed.

Definitely not a one size fits all.

Thanks for the support!

I’ve always used them interchangeably. I was today years old when I learned they are different 😅

The dials can be a little tough to see depending the lighting, I agree. I tend to keep mine unlocked while I’m in the car and lock it before leaving making for easy access. For the dial I do have plans to replace it as well. I will be getting a universal key lock that I will also use for my gas tank lock. If I make a video on it will make sure to tag you.

Yes it comes with both a left and right side! It’s one of my favorite simple additions to my jeep!

@@DanReviewsStuff Thanks...just ordered!

@@vhc7764 Awesome! Hope you enjoy them like I do!

Still working great!

I don’t have a video on it. I love it, it is “UPLIFT Standing Desk (V2) Desktop Style with Saman 1.5" Butcher Block size 72x30”. It’s wasn’t cheap, but I love it. I spend a lot of time at it. I would suggest though, while the wood looks really nice on mine, it is very soft, something as simple as dropping a pen 1ft high will leave a pen tip mark on the desk if it hits right. They have tons of wood options. Something to be mindful of.

If you go to the product page (amazon affiliate link in description), they have an option you can select for JK. It looks like it might mount differently than the JL. I don't have much experience with the JK to give more insight. Hope this is helpful!

@@DanReviewsStuffyes, I have the JK version and a t40 to remove the main two top bolts, they place a bit higher than the tubular doors. My issue is I messed around and tried to leave the bracket on and remove the mirror, oops doesn’t work as the bracket is in the way of aligning the oem doors. Now I can’t figure out how to get the mirror tightened back on, user error

@@nccoach32 Oh no, have you tried reaching out to their support? They have been helpful whenever I have questions. They might be able to help you reconnect it. It's always the worst when breaking something is self inflicted :(

Thanks for the comment. Are you sure that is for all 2024? I don't have one to confirm, but a lot of antenna listings refer to the 2024 as being compatible, not just this one. After a little research, I see something about a windshield antenna, but not sure if that applies to all models of 2024.

@@DanReviewsStuff I have ‘24 Willy and it doesn’t have an antenna attachment unfortunately. It’s embedded within the windshield.

I think I’m missing the reference on how it relates, but assuming it’s friends related ha

On Seinfeld, George makes a makes a bed under his desk at work so he can sleep he put a alarm under it and pillow. That's why I used the reference as a joke.😝😝😝

@@JoseVentura-f4b Haha, all makes sense now!

Don't drink to much coffee now😆😆😆😆

Haha Yeah for sure! 🛌 📦

Are you talking about putting the two pieces together or when you try to fasten to the door? For the nut holding two pieces together I did not have any issues. I do remember it having extras just in case. Might be worth trying a different one. I’ve had mine on my jeep for a while now and still holding strong. 💪

Haha that’s a new one.