Do the buttons on the original radio work? Do the button lights come on?
@RGPinger6 ай бұрын
yes buttons are working. I am able to change radios, my music, control volume, everything.. Also via numbers I can change preferred radio, or via touch. What lights? Lights for buttons are ON only if I turn evening lights on the car. (Same as before, no change is in that). Also I am able to control from the steering wheel, as radio was delivered with CAN BUS module. But after startup you need to wait like 1 minute until all is loaded, so it will not react on the steering wheel or buttons for that time, then OK.
@matheusbarbosaferreira31176 ай бұрын
@@RGPinger thanks, so munch!
@nathanmccullock89588 ай бұрын
hey Mate, sent you an Email, Interested in code / schematics.
@anthonyfoulkes18689 ай бұрын
thats a penalty but never be given against Liverpool!!!!!
@Rafa116-e3f9 ай бұрын
Татрах хорошая машина в жизни, на дакаре тоже себя показала с хорошей стороны. КамАЗ побеждает на дакаре, но как работать на нём? Дерьмо
@raheemmcclashie801310 ай бұрын
If var was in effect then costa would of got sent off and banned for more than half half the games
@CAETIR11 ай бұрын
what did i just stumble onto
@RGPinger11 ай бұрын
Onto RFID Domination Timer that can bring you new feature into your Airsoft/Paintball game. Suitable also for LARP, MilSim events, as there is possible to integrate hundrets of RFID cards, wristbands.
@michaelkeithduncan Жыл бұрын
I saw that you took down the source code on your website, is there any chance you can show the part that gets the lan 8720 online? I've made a couple of attempts with other reference material but I didn't get it working, it looks like you have a good working example. Thank you!
@RGPinger11 ай бұрын
No. I have put there bin file you can use. Never more any PHY Ethernet sketch from me to anyone.
@michaelkeithduncan11 ай бұрын
@@RGPingerI don't really have a use for a thermostat or bin files, just needed to get Ethernet working. I figured that out a while back now, thanks anyway
@mariamihalova-og6kr Жыл бұрын
Tak sme boli vtedy na rozhodcu nasrany a on sa opýta burlivaka kozaka na rozhodcu ,, sak kozak by im najradsej do kokotov vynadal tým rozhodcom
@MrRcarney2010 Жыл бұрын
would be interested in the code ?
@RGPinger11 ай бұрын
I can sell you .hex if interested.
@vivalafrance1278 Жыл бұрын
Nádherný gól ale nevim prečo bol stetina tak vysoko😂
@mackomacko2585 Жыл бұрын
Slovenia is a football powerhouse
@anonymanonym5334 Жыл бұрын
Ej bisťu
@RGPinger Жыл бұрын
Slovenia is 500 km from Slovakia. Totally different country.
@MajkaLajka Жыл бұрын
On vie, ved to je češko 😅 píše to pod každé video 😂😂
@lostplayer4350 Жыл бұрын
Chalan mysli že je Ronaldo
@hlbacisko Жыл бұрын
Nie, chalan neplace kazdu druhu minutu a chalan nema 11 plastik ksichtu
@dm6242 Жыл бұрын
A ty nie si ani Ronaldo, ani ten chalan. Si len ďalší z radu frustrovaných lúzrov.
@Uicdjjdj123 Жыл бұрын
@@hlbaciskoRonaldo nemá žiadnu plastiku jedine sú dal opraviť zub to je všetko🤣🤡🏳️🌈🫵😍💪💙🤍🩵😍💪💪
@holinator6500 Жыл бұрын
@@Uicdjjdj123ma veľa plastík sak to je verejne známe 🤦♂️
@lol010 Жыл бұрын
I saw that game live. Really fun
@michaldufala8992 Жыл бұрын
❤
@MrTomtomas Жыл бұрын
👏🏻
@marek_2578 Жыл бұрын
Siiiiiiiuuuuuu
@Slend37 Жыл бұрын
It is actually time to hockey? 0.55 comeback, bruh Ruffles is waiting for you lmao
@RGPinger11 ай бұрын
No, that are UIDs of RFID cards encoded into unsigned long variable.
@thecros1076 Жыл бұрын
I tried but ethernet link does down most of the times ...u have any solution for the same 🙏🏻, did u face any issues for ethernet link down frequently
@RGPinger11 ай бұрын
No, as I powered it up properly. Not with weak source.
@RGPinger10 ай бұрын
also I use program that can auto-init Ethernet once link is list, etc.
@TheImanalien Жыл бұрын
This would be great if it would go passed 15 second but just stops at 15 whichever tag is used
@ucirak Жыл бұрын
BOli sme krásna krajina kým debilná časť slovenskej populácie nezvolila OĽaNO a Matoviča do hlavy štátu, vraj nech bude sranda. Áno bude sranda pre tých čo majú úvery a hypotéky a skončí im fixácia.
@manucaox8720Ай бұрын
Boli by sme krásna krajina, ako by časť voličov (primitívov a dezolátov) nevolila zlodejov, mafiánov a náckov, ktorí sú teraz vo vláde a doslova nivočia štát.
@ucirakАй бұрын
@@manucaox8720 jasné, lebo tí primiítívi a dezolátori ako ty, čo navolili v 2020 ten odpad ako Matovič, Sulík a inseminátor tak to vôbec neboli zlodeji, mafiáni a náckovia, hlavne že pre Matoviča je vzorom hitlerová strana NSDAP ty imbecil. Za 3 a pol roka tí vaši čo sú teraz v opozícií tak znivočili štát, že to by tí, čo teraz vládnu, to by nedali ani za 50 rokov, ty hlúpa primitívna hlava.
@laurelwalthall8494 Жыл бұрын
'Promo SM'
@RGPinger Жыл бұрын
Last version of RFID Domination Timer with PCB 🙂: kzbin.info/www/bejne/imGUiJ-hep5kiZY
@arduinonodemcuprojects5669 Жыл бұрын
to bolo tesné... Ešte späták pretŕča doboku, tam bolo tak max 10 cm, ani nie..
@arduinonodemcuprojects5669 Жыл бұрын
Ten si fakt pomohol. Aspoň tam stál dlhšie ako idiot.
@Ak58119 Жыл бұрын
It was fun to watch at that time
@Herman7ar Жыл бұрын
amazin clip!
@matheuscaltran1573 Жыл бұрын
very good, I'm trying here but my esp32 is connected to eternet but no ip address appears
@RGPinger Жыл бұрын
hard to say. I have tried only DHCP - dynamic IP. Everything worked without problem. I was using ETH library that is in-built in Arduino Core for ESP32. Tested on Arduino Core 2.0.4.
@matheuscaltran1573 Жыл бұрын
@@RGPinger I can make it work on esp32-wroom-32u. I really liked the content on your channel about IoT, keep it up.
@RGPinger Жыл бұрын
@@matheuscaltran1573 thanks a lot boss, I'm glad u liked my videos.
@pcmaster2028 Жыл бұрын
Need replacing of gumy membrane in headcover
@RGPinger Жыл бұрын
i will check it. But for now it looks more like leak somewhere at throttle body.
@christopherellis86906 ай бұрын
Hey mate have you found this as mine is doing the same thing now.
@petrpetrina2 жыл бұрын
perfekt..... super... :-)
@petrpetrina2 жыл бұрын
tohle jsou tak nadherný zabery a ten song k tomu.....prostě užasny... uplně mám "husí kuži" fakt nadhera.
@RGPinger2 жыл бұрын
Try example on Wokwi: wokwi.com/projects/343629632022512211
@RGPinger2 жыл бұрын
Source code is no longer available, thanks to some users that did not respect license of project.
@arduinonodemcuprojects56692 жыл бұрын
Source code?
@RGPinger2 жыл бұрын
Source code for ESP32 and PHY Ethernet LAN8720 is available for free. Visit project's webpage at: martinius96.github.io/hladinomer-studna-scripty/en/ Choose HTTP or HTTPS test web interface, then use Program subpage and copy-paste code to your Arduino IDE and upload firmware.
@RGPinger2 жыл бұрын
Running smooth for 2 weeks now without stoppage or reset. Source code at: martinius96.github.io/termostat-ethernet/en/phy_ethernet.html
@arduinonodemcuprojects56692 жыл бұрын
Source code pls?
@RGPinger2 жыл бұрын
I sell RFID DOMINATOR in machine code .hex only. You can test shareware version for free if you want. Machine code is available at projects webpage: martinius96.github.io/Airsoft-DOMINATOR-RFID/en/
@gadfay84632 жыл бұрын
Hello! Thanks for the video, could you show the code?
@RGPinger2 жыл бұрын
Unfortunately no, code is only available in machine code .hex for testing on supported hardware. Application .ino (source code) is not available for people. Firmware in machine code is available on project's webpage in description. Feel free to test it with your hardware: martinius96.github.io/Airsoft-DOMINATOR-RFID/en/
@RGPinger2 жыл бұрын
Shareware version of RFID Domination Timer is available on Github: martinius96.github.io/Airsoft-DOMINATOR-RFID/en/
@ArrowSmith952 жыл бұрын
Hey would this be able to light led strips fairly brightly?
@RGPinger2 жыл бұрын
Hello, these standard LEDs used in project draw like 5 mA because of used 1 kohm resistor. If you use slightly lower resistor, you can increase bright of LEDs, but they will heat and can break during time because of overload. In case of LED strips, there are more options for that. You can use relay to switch other circuit with more powerful LED strips or bulbs that have for instance also separate power supply. So there is possible to use 230V AC without problem. In case of Arduino itself, there is current limitation like 400 mA at 5V that can peripherals draw. So you cannot power high-current LED strips directly from it. But you can control them from Arduino, for instance WS2812 strips. You can use also transistor or FET except relay to power it up.
@ArrowSmith952 жыл бұрын
The led strips I have are 5v
@ArrowSmith952 жыл бұрын
Hey do you have discord? Would be easier to talk about details.
@RGPinger2 жыл бұрын
@@ArrowSmith95 you can power them directly from Arduino, if peak current will be not above 400 mA. Unfortunately I dont have Discord.