hey, what is the thing below your patchbay, where there are 4 2.5" disk slots? trying to find a nice solutions to hook up disks to the pis, preferable from the back somehow without using the "front" usb slots.
@PaulWilson-j3t12 күн бұрын
Terrance Villages
@WindsorChristine-c1p12 күн бұрын
Ewald Center
@tedz200012 күн бұрын
how to updated to the latest pi companion with olderversion already installed
@CoralieVirelli-c6e15 күн бұрын
Jamal Roads
@RuslanBykov-z4y19 күн бұрын
Apple Studio or nothing.
@charlesh-bey564Ай бұрын
Hello I want to know if that board can run windows 11
@gnoetvАй бұрын
Love it
@shalamigriАй бұрын
@ 6:30 just know that inserting the thin cable from the sd adapter board into the POE hat is really easy. It's not explained anywhere, but before you try to insert it into the POE hat slot, there is a gray clip in the front of the slot that has to be pulled out. Push the cable in and then pop the gray clip back in to secure to thin cable. I had to learn this the hard way.
@ChrisWard742 ай бұрын
It would be better if they were fully enclosed for dusty environments that's including covers for the front for when you don't use the HDMI board or you don't fill the entire rack up with PIs
@sniper_d_calaile15162 ай бұрын
It’s compatible for the Sony a6600?
@MrCupid-pm5rx2 ай бұрын
Pc partpicker don't have this motherboard listed. Can someone tell me how to calculate the wattage of the smps that will be necessary to run this motherboard?
@Sokol103 ай бұрын
Most Chinese X79, X99 motherboards are not m-ATX (24x24 cm), they are more close to mini-DTX (23x17 cm), e.G. Huananzhi x79 6M is (23,5x18,5 cm).
@rtsforever4 ай бұрын
hello, first, great work here, thnaks 4 that; question, i have same motherboard and CPu, but never goes more than 2.6 ghz, so tb donty works for me, can u tell me whye; again thanks a lot
@N3xusSolo5 ай бұрын
Thank you!
@lofiaccountig5 ай бұрын
its possible to fit a ATX psu in this config?
@cihanylmaz68295 ай бұрын
please x79-vg3 motherbard bios dump?
@marcramey95295 ай бұрын
Do you still run this setup? If so, how does it perform these days?
@vvorldnewsmedia6 ай бұрын
wow some people are dumb the x79 chips are brand news meaning NEVER USED now as for the cpiu its used and repurposed man you must have some dumb subs if they believe a word you say lol so dumb
@motleychristian64626 ай бұрын
Hi Ben i like to see your Watch, whats the model and the link to where you by it....?????? thanks
@koto9x6 ай бұрын
Thank you good sir
@swapnilmashere92006 ай бұрын
I am getting error 79. What could be possiblity.
@mamdouh-Tawadros7 ай бұрын
Thank you.
@ProsqMusicSliedrecht7 ай бұрын
Hi after flashing and put the sd card in the raspberry it will say after a while: which user would you like to rename? can you help me with this?
@bergsprekken1238 ай бұрын
Could a e5-2695 v2(115W) or e5-2697(130W) work with this pico power supply? Since the video is 3 year old has anyone else watching this video lately bought it and is it the same?
@failedmonk8 ай бұрын
I can feel the exhaustion in his after seeing the white blue bios interface!😅😅
@AlexKnightVancouver8 ай бұрын
I love Smallrig as a company and generally have much love for their products, but these adapters are garbage. I have replaced these before and cannot trust them. Every single one that I have purchased has deteriorated within 6 months of use. I only use my cameras in a temperature controlled studio. Without fail, the PVC jacketing comes apart, exposing the shield and conductors. I had one camera lose video output and I'm convinced it was because of the severe deterioration of the cable. Smallrig has good support and has sent me replacements, but at this point I'm looking for another cable clamp solution for cameras that have micro HDMI.
@M4XD4B0ZZ9 ай бұрын
Beautiful product and great production quality. Keep it coming
@billwright86409 ай бұрын
Does the Yubikey 5Ci have to be plugged directly into the computer or will it work with a USB hub/splitter ?
@BensTechLab9 ай бұрын
It works with a USB hub! The device in this video is a usb hub, just the USB-A version. But USB-C is the same principle.
@realbuckybarnes17539 ай бұрын
Here I am in 2023 December and just picked up an x79 pro with e5 2650 and am about to build my first budget build in almost 20 years! No more console! Let's goooo
@BensTechLab9 ай бұрын
It's always fun to build something!
@betterpixs9 ай бұрын
Love the father \ son connection! So sweet and special.
@BensTechLab9 ай бұрын
Thanks! Yes, this is special. I hope to do more of this.
@saturn48010 ай бұрын
Great work. I now understand how to use the Stream Deck with a Pi but what about the Stream Deck software itself? I'd also like to use buttons that come directly from the Stream Deck software at the same time (using various Stream Deck plugins). The problem is we have a MacBook Air with just 2 USB C ports with a docking hub and Companion loses the connection to the Stream Deck. After working for a few minutes, we get the red flags on each button and no apparent way to reconnect it. Is there a way to set up Companion on the Pi and still use the Stream Deck software simultaneously?
@flywheeldk10 ай бұрын
Looks like it is RPi5 compatible and most likely with room for an M2 HAT - just needs power buttons.
@BrianThomasАй бұрын
I was thinking the same thing. have you purchased this yet? I'm in the market so I was looking to see if you like it or not.
@flywheeldkАй бұрын
@@BrianThomas Sorry but no I haven't - I've had some unforseen hardware failures I had to attend to first and since I have a very limited budget - but I will get into it within a month or two - wether it will be one of these mounts or some of the myElectronics stuff.
@wolver1n3x10 ай бұрын
What F keys are you using for bios and boot menus?
@MrTyger200710 ай бұрын
Thanks for this review . Planning on getting one of these
@belovedbluestar10 ай бұрын
How do you get the display to work?
@BensTechLab10 ай бұрын
You can go through and double check all the connections are fully seated/inserted. I had a similar issue on another kit where a connector was just on backwards: kzbin.info/www/bejne/ZmOTnYpuhJKigZY
@belovedbluestar10 ай бұрын
@@BensTechLab I can get it to work manually on Pi Lite but i get Failed to start RC-local.service - /etc/rc.local Compatability. See' systemctl status rc-local.service' for details. on start up. I checked that and it just said it wouldnt start...
@ge919911 ай бұрын
Will it fit if I use the MSI Pro B760M A WiFi motherboard with dimensions of 243.84mm x 243.84mm?
@Francesco_Esposito Жыл бұрын
Is the power supply fan facing inward or toward the front panel?
@alericjohansen6775 Жыл бұрын
i think the only thing i don't like about that item, is that they didn't design it to be modular. what i mean is, each time you want to add or remove a pi, the WHOLE shelf needs to be removed. uctronics does have another version, though with a few less features, where each pi is on its own insert, and thus each pi can be removed on its own. beyond that, that looks really cool. I love your desktop rack. though personally i have a 42u rack. To each his own there for each situation ;) i do wish these things were cheaper, as i REALLY want to get a Pi 4B, but i have other priorities that i need to spend money on :(
@BensTechLab Жыл бұрын
There are some new ones that are more modular that also have all the extra features! Maybe I'll review that as an upgrade some day!
@nunoandradebluesdrive Жыл бұрын
I wonder if using just one screw and mounting it on a small angle make this useful on my sony a6600..
@sniper_d_calaile15162 ай бұрын
It’s compatible with the Sony a6600?
@nunoandradebluesdrive2 ай бұрын
@@sniper_d_calaile1516 I believe so as stated here: kzbin.info/www/bejne/oGGunZSOdtx_e7Msi=BkG2foyyXADFW_CL . but it seems like it's not as robust a solution as we might believe.
@archon.studio255 Жыл бұрын
Just the video I was looking for.
@blu-eyegeek8419 Жыл бұрын
So I just saw your video and this is very helpful. Question though: Now that I have the Companion image on the Raspberry Pi, if I take that Pi to another network, basically the same setup, will all my setting still hold even though I am not on the same network?
@BensTechLab Жыл бұрын
Yes your companion configuration is stored on the file system in the raspberry pi and will travel with the rpi. In case you are ever worried, you can backup your settings in the companion UI and download a configuration file!
@CCSsixSantiago Жыл бұрын
Does anyone know what size motherboard I used? He said it was micro ATX but a smaller version.
@user-bgw01uykfj Жыл бұрын
is there any other option that not using chino brand..?
@Sokol103 ай бұрын
Sama IM01 - support micro=-ATX 24x24cm mobos e ATX case, this X79 used in the video is more miniDTX - 236,68x177,28mm.
@zombieryder Жыл бұрын
ive just builid this same setup thanks for the vrm thermal headups tip. Have you manage to make it run with quad channel memory configuration. I have installed 4 sticks of ddr3 1600 but it does not work as quad channel. Any input would be appreciated. thanks
@abnahwaz1793 Жыл бұрын
Who notic the nvme ssd was laghtling in 15:50 to 16:00
@johnwelander Жыл бұрын
Great video thanks! Just picked up a couple of these boards and the heads up about the temps is very useful...
@michaeldziegiel4954 Жыл бұрын
Can these be used with SSD drives. NVME M.2 drives? I have several PI's that use anArgon case with and NVME drive and would love to mount rack them.