Eze change fck up/clowns give you sht ya don't need.very expensive to use and change back to normal.total fck garbage don't buy.
@PBosco3 күн бұрын
I'm assuming high-test (93) gasoline?
@MrRedwine11005 күн бұрын
There is a floating pick-up attachment available for this machine
@keithferguson49426 күн бұрын
I like to see a 3039 tractor with a set of R14 tires on it
@papemachinery.agturf6 күн бұрын
Thanks for the request, @keithferguson4942!
@dougkildsig9758 күн бұрын
You do an exceptional job of reviewing relevance in Frontier and Deere product.
@papemachinery.agturf7 күн бұрын
Thanks Doug! We appreciate you watching the video.
@dougkildsig9757 күн бұрын
@@papemachinery.agturf You are very welcome!
@DONALD195110 күн бұрын
They need to change the fuel fill on the S series.. very annoying..
@user-pf1eh8lw7z10 күн бұрын
Strugling to cut an inch thick branch. 2.5 battery stops performing second times around you use it, requires a 7.5 plus which cost more than the tool.
@ca4963311 күн бұрын
Very helpful!
@papemachinery.agturf11 күн бұрын
Glad to help! Thanks for watching!
@kathycrook191311 күн бұрын
How much is this mower with a 48 inch deck. And how do you finance and through whom?
@papemachinery.agturf11 күн бұрын
Hi Kathy, thank you for watching! The John Deere X584 has a MSRP of $10,299, and if you don't bring your own financing to the dealership, you are welcome to apply for credit with John Deere Financial. Other installment credit options may be available to you at your nearest dealership.
@samstone936813 күн бұрын
Thank you. I got a new S160 yesterday. I can't wait to use it.
@papemachinery.agturf13 күн бұрын
Woohoo! Congratulations on your new John Deere, Sam! Thanks for watching the channel.
@Robert-k2t14 күн бұрын
3:35
@RogerCoe-w5j15 күн бұрын
Can't seem to get the hydraulics to lower far enough down to hook up the mower deck on my 1025R.
@michaelfinney216016 күн бұрын
Kubota BX series especially the BX-1870 or current BX-1880 is far better bang for the the buck ! Diesel extremely long life engine full size 3 point tractor hitch and 4 wheel drive ! Those Tuff Torque transmissions and Kawasaki engines are no comparison to the thousands of hours a Kubota is capable of ! Just my opinion, I love my Kubota BX-1870 54 inch deck and 4 wheel drive and capable of running real implements ! 🇺🇸 The X-590 is nice but too much price wise for it had too many limitations.
@papemachinery.agturf15 күн бұрын
Thanks for watching the channel, Michael!
@CA-tm2ci16 күн бұрын
Great review! Does this allow other attachments instead of just saw?
@papemachinery.agturf15 күн бұрын
Thanks for watching! Yes, this attachment is part of the Power+ Multi-Head System, allowing you to use fifteen other attachments - like the string trimmer, edger, or cultivator. Good question! :)
@m.a.stough499417 күн бұрын
Does the loader control side door have a cylinder to hold it open.. no brainer missing item on these JD cabs.
@iurunner3418 күн бұрын
Ear protection for an electric saw but no helmet lol
@petenanna18 күн бұрын
Tell us more of the details. What does electronic throttle control mean? Explain it so that those of us that do not have it understand exactly what this important feature can mean for us. Do you know? Sure the K72 transmission goes a little faster but what also does it have over its lighter duty cousins? Much more torque and so you can more more weight and use ground engaging attachments with no problems. So its a true GARDEN tractor not just a lawn tractor. Right? ... please explain. If you just got this for lawn duty then in my opinion you overbought. Maneuverability? what? That is nothing compared to a zero turn and if you have no hills i would have bought a zero turn for sure. Those are maneuverable. You leave alot unsaid in this review.
@papemachinery.agturf18 күн бұрын
Hi Pete, thanks for watching the video. In our Let's Go Mow series, Jason takes different John Deere riding lawn mowers out of the dealership and puts them to use on his lawn. Each video features a different machine, so if you'd like to see a zero turn in action, we have several episodes featuring different models. We invite you to browse our playlists for more information and walk around videos of our riding lawn mowers, with more information on the specs of the machine rather than a demo. Thanks for the feedback here and if there is a specific model you'd like to know more about, let us know!
@johndenver857418 күн бұрын
I use the x700 series with 4wd. As I mow customer drainage ditches with 45° slopes. Hasn't rolled or had any problems yet. I like the locking differential on the x590. All it needs is more attachments.
@papemachinery.agturf18 күн бұрын
Thanks for watching, John!
@SamSmithBB2119 күн бұрын
Just bought this same machine today, came back to this video to educate myself again. Unrelated, the truck driver pees between his truck and trailer behind you at the 9:30 mark lol geesh lol😅
@papemachinery.agturf18 күн бұрын
😮😆 oh goodness. Thanks for watching Sam! Congratulations on your new John Deere!
@stevenbelsky165220 күн бұрын
I just brought a new x330 to replace my old 100 series and I absolutely love it i just wish they would have kept the mower deck yellow
@papemachinery.agturf19 күн бұрын
Hey Steven, thanks for watching! Good to hear your new Deere is up to the task. A lot of people really miss that yellow deck. We'll see what future model years look like 🤔
@DoctorRickSanchez20 күн бұрын
Wait that big thing isn't commercial?? Wow it is decked out like one though with rops, big engine & everything.
@papemachinery.agturf20 күн бұрын
Thanks for watching, Doctor Rick! You bet, the John Deere Z700 series is top of the line and not too shabby. The Z900 Series is considered the Commercial Line of zero turns.
@jp-us9rq22 күн бұрын
nice tractor.u think for the price they would have a better motor
@rusty207524 күн бұрын
Not true half the dirty oil is left in crank case. use the conversation kit do it right ...and cheaper ..
@williamhamilton811126 күн бұрын
I love my John Deere s240 48 inch cut a great machine
@papemachinery.agturf25 күн бұрын
Thanks for watching William! The S240 is pretty great. :)
@jasno33327 күн бұрын
Great video, your "uhhs and umms" are fine. Good info
@papemachinery.agturf26 күн бұрын
Thanks so much! We appreciate you watching the channel.
@virgilcresswell499428 күн бұрын
Love mine. Cab model has armrest.
@papemachinery.agturf28 күн бұрын
Good to hear, Virgil! Bet that cab is comfy. :) Thanks for watching the channel.
@karibasappamgmgksolartrapАй бұрын
How much
@papemachinery.agturf29 күн бұрын
Thanks for watching! Contact your local dealer for pricing info.
@Sundance56Ай бұрын
Good video. Thanks 👍
@papemachinery.agturfАй бұрын
Glad you liked it! Thanks for watching. :)
@ElectricIguanaАй бұрын
Does this still require storage maintenance like a pump armor type of solution? Is it fully elwctric? I'm assumingntheres no oil or gas etc needed.
@papemachinery.agturfАй бұрын
Thanks for watching! Yes, there is a winterization process in the product manual. It does say that a pump protectant should be used after clearing the unit of any remaining water.
@gailjohnson6670Ай бұрын
Thank you for the video. Blessings to you.
@papemachinery.agturfАй бұрын
Thank you Gail, we appreciate your support of our channel!
@williammain7281Ай бұрын
This machine would be so much better if it would mow in reverse without the button like the 1 series. I wish Deere could offer me the option to legally accept this risk and then short circuit the darn button.
@papemachinery.agturfАй бұрын
Thanks for watching the video William!
@tatewelch2734Ай бұрын
The amount of “uhhs” & “umms” my dude. Forgot what I was watching
@papemachinery.agturfАй бұрын
Thanks for the feedback Tate, we appreciate you watching.
@joeheneghan9375Ай бұрын
I just bought a new 2024 5075E with the Premium Cab. I only have 4.1 acres but I still thought this was the better size tractor for me.
@papemachinery.agturfАй бұрын
Congrats on your new Deere! Thanks for watching, Joe!
@user-hz7pk9fm6gАй бұрын
Is the 390 air or liquid cooled
@papemachinery.agturfАй бұрын
Thanks for watching! The X390 is air cooled.
@claviclenotch1876Ай бұрын
Just bought one. Had a 2015 D140 previously. Haven't used it yet, but thanks for saving me the time of being bored to tears reading the manual lol. It is almost identical to the old D140.
@papemachinery.agturfАй бұрын
Hi Clavicle, glad we could help out! Congrats on your new John Deere! :)
@LeeHenryАй бұрын
Exact same cab as my 18 year old 2006 John Deere 3720... Exact same.
@papemachinery.agturfАй бұрын
Hi Lee, thanks for watching! You're right, the design of the cab itself isn't that much different, but there are some new features that weren't available in 2006, like LED lighting and bluetooth.
@gardener9057Ай бұрын
I would think EGO would equip their commercial line with “IQ line” 🤔
@papemachinery.agturfАй бұрын
Thanks for watching, Gardener!
@Gt3Nismo13JАй бұрын
In my opinion, I don't think they should because I had a line IQ back then, but the system was not working properly after four weeks.
@gardener9057Ай бұрын
@@Gt3Nismo13J that sucks, it’s their top of the line, you were able to bump feed though?
@grantparnesАй бұрын
Many people say line IQ is slower to react to releasing line than they would like. Bump it and go.
@paulf30672 күн бұрын
"Line IQ" only works if the electric motor is located on the trimmer head, which would make it extremely nose heavy with the huge electric motor that the commercial trimmer uses. Even the new homeowners model (MST1603) has gone to the motor located in rear and ditched the "Line IQ" in favor of a driveshaft system like the STX4500 trimmer does. So now it can even use attachments too. But there is nothing like the power of STX4500, the MST1603 isn't a bad trimmer but it isn't even in the same league as a EGO commercial trimmer like STX4500 when it comes to power and comfort ect.
@gailjohnson6670Ай бұрын
Thank you for the video. Blessings to you.
@papemachinery.agturfАй бұрын
Thank you Gail! We appreciate you watching. :)
@petersplat6164Ай бұрын
Material collection system? You mean a grass catcher? Deere charges over $900 for that grass catcher. And they charge over $300 for the service manual. If it stops running and you get a fault code, all you can do is scratch your head and take it to the dealer, and maybe they will be willing to work on it.
@papemachinery.agturfАй бұрын
Hi Peter, thanks for watching the video! Yes, we work on the Z370R in any of our service shops. We have 43 locations throughout the West. Here is a link to the owner's manual: www.deere.com/en/parts-and-service/zero-turn-mowers/residential-eztrak/z370r/ Let us know if you have any further questions! Thanks again.
@jdfleetguy28Ай бұрын
Curious will this also work behind an X758 with 3pt and rear PTO options. I have a very similar Maschio Ditch bank flail on the back of my 5125R, looks about the same as that model on the back of your 4052R. I agree Maschio is a first class flail. Very high quality from what I have seen with the ones I have owned. Really happy so see they are now available from mg Deere dealer as frontier models.
@papemachinery.agturfАй бұрын
Hi Fleetguy, thanks for watching! Great question. The FL1053 has a machine requirement of 1550 lbs, which means the X578 is a little light for this unit.
@jdfleetguy28Ай бұрын
@@papemachinery.agturf Thanks for the reply. I thought that weight might be problem. Mine does have suitcase weights on the front, and rear tires are filled. So, I am probably close, but I figured best to go with the FL1061 and put behind either of my 3Rs or possibly my 4075R in pinch. Likely ideal fit for my 3039R OOS or cab 3046R. Ordered a Fl1061 last Friday. I did cross shop it with the Deere 370 and 25A flails but seems since Deere did this frontier deal with Machio, they discontinued all the Deere flails.
@papemachinery.agturfАй бұрын
@jdfleetguy28 - the 25A is still available to order from John Deere, and so is the heavy duty flail. We have availability on any of these flails to include the 370 - while our inventory lasts. :)
@jdfleetguy28Ай бұрын
@@papemachinery.agturf Interesting, my dealer said he tried to spec one to order and the system would not take an order for the Deere models, he said he dug into deeper and found out those models were discontinued, which we both figured it was due to this new Frontier deal Deere made with Macchio last year. I was attempting to get a comparison of the FL1061 to that Deere 370 Price wise there was a huge difference, still don't really know what made the 370 so much more money than the FL1061, but since it was not something I could order I just went with ordering the FL1061. I don't mind paying for quality, I however due like to know what make it so much better to demand such a big difference, it was near double I think was something like $4K for the FL1061 vs $7K for the 370 in ballpark numbers.
@markmason2885Ай бұрын
I’ve got a new s100 with only 4 hours on it. The belt is starting to squeal when I engage the blades, how do I tighten the tension on the belt?
@papemachinery.agturfАй бұрын
Hi Mark, thanks for watching the video! Please reach out to your local John Deere dealer and they can assist. Find our locations here: agriculture.papemachinery.com/locations
@mosfet500Ай бұрын
What should people in cold climates do in the winter with this zero turn? JD says storage at --4F but I live in a place that can have --20 below and I've seen solid research that says there is battery degradation below freezing (32F) on Li-Ion batteries. I may have to cancel my order.
@papemachinery.agturfАй бұрын
Hi Mos! Jason says: "I think you have some legitimate concerns. Your extreme conditions may need you to look at some creative solutions. Maybe an external warming device like a heating pad or warming bulb on the days it dips below -4F."
@mosfet500Ай бұрын
@@papemachinery.agturf You deleted our reply, not right to do that. We cancelled this, JD has problems, not the same company it once was.
@papemachinery.agturfАй бұрын
Hi Mos, We didn't see a comment, and didn't delete. We were actually looking forward to finding out the course of action you'd take. Which model are you going with, for your extreme temps?
@mosfet500Ай бұрын
@@papemachinery.agturf Thank you. I'm very fond of my JD equipment, it has worked wonderfully well over many years and I truly hope this problem is resolved. This is my field and I know these batteries very well, a lot of people are very afraid of them because they don't understand the technology and chemistry. They are great batteries, every laptop, cell phone and garden implement has them BUT they must be used within specific parameters to function properly and last. You simply can not store these batteries or LiFePo4 batteries below freezing. I have asked JD for an answer on this but have not received one, the only solution I can see is to remove the battery pack for the winter and that is what I suggest those in cold climates do. I hope JD resolves this, I really like the total design of this zero turn, JD's revamp of the 3 series in 2023 really made this a worthy product. Hopefully next spring I'll be able to reinitiated my purchase or even a 5 series electric if they decide to make one..
@papemachinery.agturfАй бұрын
We appreciate your knowledge and insights about these batteries! Keep us updated with the developments on your electric zero turn journey! :)
@mrbubetubeАй бұрын
why is it important for me to listen to music the entire time you're talking?
@papemachinery.agturfАй бұрын
Hello Mr. Bube, we're not sure if it's important, but if you aren't a fan, you're in luck. We've changed our format this year so our new episodes have no background track while Jason speaks. Plus, we've added captions for you to read if you'd rather mute the video. Thanks for the comment!
@mr.gtmsworld2494Ай бұрын
Did you mention the engine and pto horsepower?
@papemachinery.agturfАй бұрын
Hey Mr. GTM, maybe Jason was so excited he forgot that info! The John Deere 4052R has an engine hp of 50.8 and a PTO hp of 40.8 (with the PowrReverser transmission). Thanks for watching!
@Connie.BradleyАй бұрын
😢
@papemachinery.agturfАй бұрын
Thanks for watching Connie!
@jeffwilson4972Ай бұрын
Very helpful video. Thanks!
@papemachinery.agturfАй бұрын
Hi Jeff, thanks for watching! We're glad we could help you out and give you some insight. :)
@boarderman23Ай бұрын
Thanks for the video, it's exactly what I was looking for! I'm debating between this or the FL1169S, but figured the FL1272S wasn't an option since it's for a Category 2 hitch (until watching this). How easy is it to use on a 4075r cab (essentially how easy is it to convert to a Category 1)? It would be on a 4075r set up similar to yours (4th & 5th, wheel spacers, filled tires, front end loader, etc.). I have rolling hills and hoping one of these models will really help with mowing around my ponds and into some harder to reach areas. I also have a 5m, so if it's easy enough to switch back and forth between Cat 1 and 2, then it could be an extra benefit. Thanks for your help.
@papemachinery.agturfАй бұрын
Hey Boarderman, thanks for watching! It was a pretty easy swap for Jason to use this flail. Sounds like you'd really be better off with that FL1272S for what you need to do. Glad we could help you out!