NO you can buy 30 inch leg screw caps from preston and upgrade the inception .. i have two on mine. They come in packs of two.. a little tricky to do but not too bad.
@loganfitter87787 күн бұрын
I’ve got the same rod. Only the 10ft version. Would you recommend getting the 320 reel or the 420? Also what lbs mainline would be best for the set up?
@fishingbitesandbanter2937 күн бұрын
@@loganfitter8778 320 if your gonna do lighter short range work. 420 for everything else. Loaded with 6 to 8lb line . 🎣
@loganfitter87787 күн бұрын
@@fishingbitesandbanter293 thankyou, so the 420 wouldn’t be too heavy?
@drumbatter1009 күн бұрын
Just a pity it dosent have an external pocket for landing net handles etc
@fishingbitesandbanter2939 күн бұрын
That's too true
@stesmith737313 күн бұрын
I use the MAP seal system bait bags and the pole roller bag. More than happy 😊
@markboylan921525 күн бұрын
Great video thanks. Do you keep it in cold water once done until you go fishing? Thanks
@fishingbitesandbanter29325 күн бұрын
Yes I do!
@janetwoods5811Ай бұрын
This jacket is a waste of money….it hardly gets warm. I sent back 2 jackets which turned out to be faulty. After that I just stuck to my sundridge bib and brace….job done!!!
@36summersАй бұрын
Hi, I take it you used a non waited float, as you stated your float was flat??
@fishingbitesandbanter293Ай бұрын
Yes I did. It was as a demo with the easiest floats to tell how your plumbing
@huppekeesАй бұрын
nice peace of plastic, but i cut it with hand as easy and with more different sizes in almost the same time... even twice the time is no big problem.. i don't have to clean the plastic, just a plate, so that safes time... but its handy... i rather do it by hand, as easy also. Boiling water ad with garlic in it, give an extra flavor and also retracts fat from the meat. When jou just cut and use a fish liquid or amino liquid directly on the meat for more than 12 hours, you don't need boiling water.... on a week session its more easy.... nice video by the way.
@mickeyredАй бұрын
cheers for that. Could you do a vid for plumbing the depth when a few yards out, way pat the end of your rod. I struggle with plumbing the depth it' s my nemesis
@tonysmith2721Ай бұрын
I took this man’s comments on board, BIG MISTAKE. Paid £80.00 and it was the biggest waste of money ever. Every single cast the line tangled behind the spool around the mechanism cogs. TOTAL RUBBISH.
@John..18Ай бұрын
I have the 506 mk2, which is very similar to this one, and it is totally perfect, I've used it a lot, and never had one single tangle,, maybe you've put too much line on the spool,???
@juslitor2 күн бұрын
@@John..18 Too much line definitely will ruin ones day.
@stuartnewman69682 ай бұрын
Nice video thank you. You got a sub
@carlbrain37582 ай бұрын
How do you choose which spool to use?
@fishingbitesandbanter2932 ай бұрын
Fill them with your desired line strengths and choose the one which is right for the conditions or species your targeting on the day
@carlbrain37582 ай бұрын
OK so say I wanted to use 6 or maybe 8 pound line for slightly heavier float fishing to try to avoid small roach and perch and instead target Tench and small carp. Under arm casting with a 13ft rod. Which spool would you recommend? And do you fill the spool right up with line. Or do you stop slightly short to reduce the risk of the line jumping down the back of the spool?
@fishingbitesandbanter2932 ай бұрын
@@carlbrain3758 personally with line like that I'd use the deepest spool with some backing line if needed. And spool it to just a mil or so short of the lip to prevent spooling off .
@pr2482 ай бұрын
Looks great. All you need now is the RAF to helicopter it in to your peg
@chrismuir75462 ай бұрын
Sorry I’m very late to the party. I have just bought the 506mk 2 which is fabulous. Unfortunately I’ve heard a lot of negative feed back on the 507mk2. May I ask are they 1 or 2 pin on the spool & how is it fairing up today ?
@fishingbitesandbanter2932 ай бұрын
Honestly mate I haven't used it for nearly a year and it's locked away in the shed somewhere. Mostly using pole and some light feeder work lately.
@makkavelli39723 ай бұрын
I find the legs are too far apart from the box on the preston 3D ,,,so if you have shorter arms, u feel like your streching too reach over to the Bait trays and pole socks...
@burbsoul33593 ай бұрын
Hope all is well mate and some new content is coming soon , looking forward to the new pole review.
@justice-974 ай бұрын
Cant belive, the horrible comment thank you so much great tips
@drunkmonky14 ай бұрын
Its not big enough for me need to take more then anyone else to catch a fish 😅😅😅
@65swinny4 ай бұрын
good video but way to much talking just show how it works
@Northstar-Media4 ай бұрын
It is well made its a pity westlake dont make extra add-on compartments for the box & and their feeder tray with hood for the box is really well made.
@LeeATKINSON-lu2qj4 ай бұрын
Great video. Is the bar big enough for 3 nets when fully extended?
@fishingbitesandbanter2934 ай бұрын
Not ideally. You might fit em but it would be a struggle
@Northstar-Media5 ай бұрын
Im thinking of getting a map tks 8.5 metre margin with 3 top kit. or 10 metres preston edge monster, can you still get an extension for map pole & which one would you recommend.
@fishingbitesandbanter2935 ай бұрын
There is no extension for the map tks margin pole id say the Preston is the better buy if your wanting the extra distance . And strength.
@Northstar-Media5 ай бұрын
I'm thinking of buying a Map TKS margin 8.5 or Preston 10 meter edge monster. What would you recommend & can you get an extension for the Map
@fishingbitesandbanter2935 ай бұрын
The map tks is awesome for its price . But the Preston edge monster is known for being the best of the best for pure strength and fishability in its price point. The only reason I went for a MAP instead was it fitted all my top kits. Personally I'd stay the Preston is better.
@kennethsummerswgill26425 ай бұрын
the 3 net maver bar just how are you supposed to fit keep ????
@fishingbitesandbanter2935 ай бұрын
That's just for 2 keep nets.
@pauljoyce71175 ай бұрын
Have you still got the transporter and have you had any problems with it
@fishingbitesandbanter2935 ай бұрын
Still got it and going strong. No issues yet apart from the stitching on the back bag coming apart at one of the velcro straps. Due to me over loading not a flaw in the bag.
@pauljoyce71175 ай бұрын
@@fishingbitesandbanter293 thank you for the reply but just bought the map version 2
@rogerwilliams93715 ай бұрын
Great video
@cannonball63725 ай бұрын
Does this cut raw chicken as well ?
@fishingbitesandbanter2935 ай бұрын
I wouldn't say so but I haven't tried to be honest
@cannonball63725 ай бұрын
@@fishingbitesandbanter293 no worries. Thank you !
@15091974ful6 ай бұрын
QUALITY..
@15091974ful6 ай бұрын
Just watchin your review on martins lake. looks really good. P.s. would like to see some matches if poss pls??
@Northstar-Media6 ай бұрын
I've bought this rod rest but when I screw my quiver rest on the end its always at an angle no matter how I adjust the quick release block. I have to put a washer on the thread so it tightens up in the correct direction.
@thedrifterr6 ай бұрын
Just watched vid and ordered this product, cheers mate
@peterwells77197 ай бұрын
I opened my box and a black spacer looking thing feel out and I can't work out where it came from any ideas ?
@fishingbitesandbanter2937 ай бұрын
Without seeing what it was I have no idea. Unless it was some kinda washer . Really sorry I can't help you there
@peterwells77197 ай бұрын
@fishingbitesandbanter293 I don't think you can send pictures in the comments
@Northstar-Media7 ай бұрын
How do you fit a feeder arm to a square legged box . Do I need a specific arm type
@fishingbitesandbanter2937 ай бұрын
There should be a insert you can buy to go on the attachment that makes it conform for square leg boxes.
@martinhassall78847 ай бұрын
Great video. Ive just purchased one of these 2nd hand. Does it matter which blade you cut the meat first? Also if I'm only going to use one tin but one cut half in one size and half in another will it work still or will there be too much movement with there being extra space for half a tin to move?
@fishingbitesandbanter2937 ай бұрын
It should still work if you only use half. And it doesn't really matter which blades first. It's still and even cut. I just tend to use the straight blades first
@martinhassall78847 ай бұрын
@fishingbitesandbanter293 thanks for getting back to me much appreciated
@northshoreproductions37877 ай бұрын
Brilliant review. Does it come with adaptor block?
@fishingbitesandbanter2937 ай бұрын
Yes the one inserted in the end for all head attachments.
@northshoreproductions37877 ай бұрын
@@fishingbitesandbanter293 brilliant thank you
@janineshaw76437 ай бұрын
I've got this brolly, had it months now and it's terrible in windy conditions, waste of money in my opinion
@Matt-uq3in27 күн бұрын
What brolly is good in windy weather?
@Angling4U7 ай бұрын
Merry Christmas fella
@fishingforbiteswithmo7 ай бұрын
Ordered one of these, and I can't wait to get out and hopefully catch with it 👍👍
@DMROLFE7 ай бұрын
Hope you had a great Christmas and wishing you a happy new year! Looking forward to more videos. Thanks for all your advice!
@burbsoul33597 ай бұрын
Merry Christmas bud and the same to all who follow you 👌
@pottsy12988 ай бұрын
Merry Christmas 2 you 2 mate hope you n your loved ones have a peaceful n enjoyable time.looks like Christmas come early 4 you with the new pole 😊
@dianehill26708 ай бұрын
Merry Christmas let's hope lots of bites in New year 🎊
@IvanPleasants-nd7dj9 ай бұрын
Too long winded ,no info on the rod and how it performed
@alanmeasures83379 ай бұрын
Nice quick easy video mate nice to know if you forget can do them on the bank if you have your pump
@DMROLFE9 ай бұрын
Quick question is the power top kit a 2 piece kit? Meaning does it breakdown into 2 sections. Doing my margin pole research I’ve seen some power kits that are shorter and only one complete section. Thanks.
@fishingbitesandbanter2939 ай бұрын
The power carp kits are a two piece kit. You can get big bore kits but I'm not sure if they are 1 or two piece. I believe two piece.
@DMROLFE9 ай бұрын
@@fishingbitesandbanter293 thanks, mate!
@DMROLFE9 ай бұрын
@@fishingbitesandbanter293 morning, mate! Quick question Black Friday has arrived deals aplenty. I have seen an incredible deal on an M20 8.7m margin. Do you know much about them?
@fishingbitesandbanter2939 ай бұрын
Don't know much about them. Never even held one. From accounts of people who have one they say they are good and solid. Apart from that no info . Sorry
@burbsoul33599 ай бұрын
Great review bud, what’s your thoughts now you have had it some time? Do you use every system ?
@fishingbitesandbanter2939 ай бұрын
Hi. I have to say I love the system. I use every piece of it for all bits and bobs every single trip. From box attachments to hook length boxes and feeders, to towels and bait oils and flavours. It's all in there . Even room inside for a few rig boxes
@mikevdb63869 ай бұрын
Hello from Belgium, these bayonets where can I find them and what brand is it? They are looking just good.
@fishingbitesandbanter2939 ай бұрын
Hi . The bayonet hook length i used is a drennan product. But there are many brands that make them . Preston and guru too . .
@burbsoul33599 ай бұрын
Welcome back bud, great review.
@DMROLFE9 ай бұрын
Great video! Currently, it’s a toss up between one of these or an Edge Monster. Your unboxing reviews are really useful. Thanks.
@fishingbitesandbanter2939 ай бұрын
Glad you like the vid. Not a lot to choose between them but will say the edge monster has the ability to go to 10m and is strong as an ox. But can't say I've even come close to damaging a section of the map margin either .
@davidtaylor69613 ай бұрын
Currently in the same boat looking to get into course/match fishing what did you go with in the end preston or MAP
@DMROLFE3 ай бұрын
@@davidtaylor6961 hey! I got a MAP M20 margin pole. It was on a really, really great deal. In the end I was told that the MAP M20 was much better pole than edge monster. Better carbon etc. I don’t know if that’s true. My thinking with it being more expensive RRP as and when I decide to upgrade should get a better price… maybe? I bought it online, so did not have a waggle pre-purchase. If you can I would recommend try any pole before you buy, but it’s not easy. Down my way no pole alleys. So I took a chance. Overall I’m pretty happy.
@DMROLFE3 ай бұрын
@@davidtaylor6961 sorry, MAP M20 is only 8.7m long. If you’re looking into fishing matches, I suspect you will be looking longer. Up to you.
@nigelmiddleton27279 ай бұрын
Good review of a great product. I recently purchased one of these eva bags and they are very good. Just wondering if Preston do a lager version than the standard size? I cannot seem to find anything apart from the standard size?
@fishingbitesandbanter2939 ай бұрын
I can't find them either but I assumed as it's called standard there must be small or XL versions too. 🤷
@nigelmiddleton27279 ай бұрын
@@fishingbitesandbanter293 cheers mate, yes you would think there would be a larger version? Maybe not? Would definitely purchase a larger one to go with the standard.
@daleoliver99989 ай бұрын
What’s it like 10 months on ? I’m thinking of getting 1 will they fit a 16m pole with top kits and handle ? Cheers 👍
@fishingbitesandbanter2939 ай бұрын
Still as good as new. Not a single problem or crack or anything that I can point to. The only thing that is slightly annoying is the water seal that goes around the zips can catch on the zips when opening and closing but you soon get used to it and figure out the best way to avoid trapping it. I'd highly recommend it .