Harley Dave

Пікірлер

@JayyBird93 2 күн бұрын

Did the upgraded gauge keep you happy throughout ownership? Any issues with the fuel readings?

@jeffuren6942 5 күн бұрын

The most important thing about..needle roller bearings is...the actual individule needle does NOT rotate on its own axis..the whole race rotates but st a generally lesser speed than the shaft it surrounds

@rogertoledo478 7 күн бұрын

Hi, great sound compare to others. In their site they have the 4.5" B.A.M. Stick Slip-On Mufflers - Black & 50 Cal - Slip-On Mufflers - Black. Which one is yours?? Thank you

@someonesomewheresomdeday 15 күн бұрын

So you've thrown 3 different tuners at the bike, but never thought to take it to a dyno and get a proper tune? Sorry, if it wasn't tuned on your bike, it's a canned tune.

@harleydave2316 15 күн бұрын

That is a fair question and yes, I did consider it. At that time, I was talking with an exhaust manufacturer for testing some of their products and I needed a tuner that I could work with and make changes regularly so a dyno would be a waste of money. I have 2 other bikes that have been dyno'd so I am absolutely support what it does for the bike. The issue I had with the other 2 tuners, is even after many 'auto tunes' and support calls, we couldn't get the bike to run right, until Fuel Moto stepped in. :)

@texasfedtexasbred1803 24 күн бұрын

I’m not gonna lie, I just ordered this tuner because of your reaction. Got the screaming eagle stage 2 cam and now I’m excited. lol

@Benlari Ай бұрын

Hello, Are you interested in testing products?

@dftabler Ай бұрын

I like the tach speedo were can i get one

@matthewchaeny4482 2 ай бұрын

yall can bocme boozefighters

@Method_MOK 2 ай бұрын

have these in polished on my '13 FLHRC, also 14" and for my 6'2" frame ideal fit with knuckles a little below shoulders. KST was a must for me as i wanted SS polished, not chrome over mystery metal.

@terry8693 2 ай бұрын

I have one of these same colour great bike my first harley . Ive done tank lift relocated coil new air intake bar risers not sure what to do next lol

@MrMurphc13 2 ай бұрын

Stock cam?

@cowboyassass1n 3 ай бұрын

Looks great, Sounds good, Preforms very well, you're on your way little brother!! I've missed seeing Harley Dave vids!!!

@brianpowersful 3 ай бұрын

Beautiful Road King

@michaellichtenberg6670 3 ай бұрын

Great video. You should get a commission from Fuel Moto for helping sell their product. Question: did the tuner make your bike run cooler, or no difference noticed? Thanks

@richford2514 3 ай бұрын

I just bought a 2014 road king looking for higher bars im 5'8" kinda have long arms what to you think between 12s or 14s for might height

@og_gilly3764 2 ай бұрын

14s

@iginogasparini3369 4 ай бұрын

And if you want it better get a target tune put on that bike. Cloosed loop system wide band. Then you will really feel it. Thats the best on the market 👌

@pulaskicondoassociation6799 4 ай бұрын

15 bucks?!! Who has that kinda dough

@DanishAfridi551 4 ай бұрын

Bad camera angle

@MattVanBuren757 4 ай бұрын

Any issues with seeing the speedometer in bright sun? I had a dakota digital on my road king and had to replace it because i could not read it in bright sun

@gregfortmayer4535 4 ай бұрын

i have almost identical set up. my 17 Breakout runs great. 108HP 120torq. torq curve comes in very quick and is a blast to ride

@Hey_You_Me 4 ай бұрын

Hows your clutch doing?

@markthompson242 4 ай бұрын

put silicone on the bearing and the tool ,let it dry ,then remove the bearing

@harleydave2316 4 ай бұрын

@@markthompson242 Absolutely not. You never intentionally put silicone anywhere inside a motor.

@bluesriderDF 4 ай бұрын

Great video Dave. I have a PV2 for my Street Glide and I need to fine tune it, you gave me some inspiration. But I'm still on honeymoon with the new Fat Boy 😍😍

@harleydave2316 4 ай бұрын

@@bluesriderDF looking forward to seeing more videos of it and how you'll end up personalizing it. 🙃

@300shields 4 ай бұрын

Nice! What bars? Thanks.

@harleydave2316 4 ай бұрын

@@300shields 16" KST Straight Jackets

@TC-hb2gn 5 ай бұрын

I don’t care how great EFI is, there is nothing that sounds like a carbureted Harley.

@chaoticend27 5 ай бұрын

I don’t have a Harley type moto but this video for sure showed me how to properly use the sealer 🙌 thank you! I give this a Seal 🦭 of a Approval 💯

@juanespinoza2433 5 ай бұрын

What was the total price break down? I'm doing a similar build on my 2014 Electra Glide Police Model. Thanx in advance for your time.

@paulc9322 5 ай бұрын

That was a lot more than 10seconds

@mr.b3168 3 ай бұрын

I counted and you are wrong.

@reefgratos2035 5 ай бұрын

I live in a city. I had The vance and they were way too loud in my area. The cops will pull you over and give you a nice ticket. Screaming eagle ii is a safer bet ….

@oldphart-zc3jz 6 ай бұрын

Use the right bearing remover because standard internal jaw pullers only work some of the time. I found out the hard way and had to find EVERY crumb of bearing race and every roller to make sure the engine was clean of debris. HD did the INA nonsense twice, first with Evo big twins then with the Twinkies. It was a knowing choice to use marginal parts.

@jayhel23 6 ай бұрын

so doing this removes the farting sound without the baffle?

@JohnnyRebKy 6 ай бұрын

They pretty loud on a twin cam engine.

@nobleff51775 6 ай бұрын

How loud when cruising

@logannolan2575 6 ай бұрын

im curious as too what year is this bike. going to be doing my primary and wondering it its the same as my 03 fxdwg?

@harleydave2316 6 ай бұрын

@@logannolan2575 This is a 2005 and should be identical to yours.

@dennisyoung4631 7 ай бұрын

Drawn Cup needle bearings - both INA and Torrington are brand names. Originally, INA was German, while Torrington was originally “Domestic.” The INA bearing has a *cage,* while the Torrington is *full complement.* Full complement bearings can handle greater loads, but tend to complain if they’re turned too fast.

@1963KILO 7 ай бұрын

What's the difference between de-catted stock OEM pipes and after-market header pipes? I de-catted the right stock header on my 2021 RGS and was wondering if there is any added benefit to buying a set of after-market open headers vs running my de-catted stock pipes with slip-ons.

@anglerradical7035 7 ай бұрын

Is this exhaust has baffles?

@2HotWheels 4 ай бұрын

Yes he removed & put dk customs torque cone inserts

@kennethcalimpong7919 8 ай бұрын

Hi Harley Dave, liked & Subscribed, just got same setup, loving my 2020 RoadGlide 114 even more ❤, looking forward to all your content, Ride Hard💪🏼, Be Blessed 🙏🏽,Aloha Kenneth 🤙🏽

@harmanchannel7948 8 ай бұрын

Hi, Is VH power dual compatible with reinhart slip on?

@mk27wrx 8 ай бұрын

Great sound bro , what type of exhaust is that ?

@ronfriend 8 ай бұрын

Do they make an actual true dual with no H pipe?

@ozziejim8472 8 ай бұрын

I’ll take those mid controls over forward all day!

@RoboCop-zn8bt 8 ай бұрын

That's gata be a great feeling. I Wana do the 1259 kit on mine as well. How's it feel riding?

@tonecontrol3271 8 ай бұрын

Wished I had bought my new PV3 from Fuel Moto. I can't get a tune from Dynojet for my M8 107 with V&H Pwr Duals, 4.5" exhaust, SE Hi-Flow AC, and S&S 475C Cam. Anyone have a DST file for such a tune that has same cam ans similar setup they'd want to share?

@harleydave2316 8 ай бұрын

you can buy tunes from fuel Moto

@tonecontrol3271 8 ай бұрын

I have the Dyno Power Vision 3 and there is no tune listed for an S&S 475C cam for my 2017 Road King Special.

@harleydave2316 8 ай бұрын

contact fuel Moto. They will help you.

@ChrisGlides 8 ай бұрын

Nice looking ride. I’m new to road king and just watching tons of videos.

@cj8172 9 ай бұрын

Would sticking some duct tape around the inside of the bearing before pulling it be a good idea maybe? Good video

@phillipsmith7294 9 ай бұрын

What's your opinion as thinking I might do this

@phillipsmith7294 9 ай бұрын

What jets did ya use in carb

@travj4450 9 ай бұрын

😮Hey man, I'm a first timer working on a twin cam. My front inner cam bearing exploded while riding. I'm missing almost every part of the bearing. Only a bit of outer cage. No peices in oil filter. I gotta tear it down huh?

@harleydave2316 9 ай бұрын

Sorry to hear that! You definitely have to tear it down but in your case since you wasn't just trying to remove it and the bearing broke, you may need to pull the oil tank and flush it as well. You have to find all the pieces. 😩

@susandavis5833 9 ай бұрын

Thank you for this video.

Ең жақсы KZbin

Пікірлер