Mine is a brand new machine, and my bobbin is popping up, causing thread to hang and tangle

Modern timing checks, could you guys contact 2 or 3 shops in each state that will work with enrolled students for them to come in and do a timing repair in person. Yes still cost of travel but unless you live in Texas even center of the state is less than 4 hours of travel so still able to be done in a day

I have an old cast iron base with pedal. How would you wipe that down with the same? Thank you

Hi! I replaced my bobbin case but the thread is still causing the case to pop out of place. Any tips? I’m completely stumped. Thanks

Show us how to put the bobbin in the holder and put it back too! Thank you.

I have a Viking 6430 and the bobbin Case/Shuttle is very loud but stitches are good and no broken needles or thread. I've completely cleaned out all the thread/lint debris. Should I buy a used Shuttle and replace the one I have. Thank-you for your help.

I was given a random vintage foot pedal with my singer rocketeer and the plug in does not work with my machine, would I just be able to buy the lead cord that works with my sewing machine and use it to replace the wires in the incompatible foot pedal?

Where is you academy send me you address please

Hi thank you for this information! You explain things so well! Do you still send out the handout? THank you!

The tread stays on the top of the bobbin and then there's 2, I got a new bobbin case and it still does the same thing. It's clean no lint, can I send a pic?

I have had my machine for less than a month and already gone through three bobbin cases. It’s a heavy duty singer and it’s new. I am not sure why this occurring and was wondering if you have any ideas as to what I could be doing wrong. Another thought I had was is it possible to get an all metal bobbin case for this model to prevent breakage?

The black pieces one got broken :(

Happy New Year all!🎉

Hi from NY

Great video - thank you for making!

Do you offer a certificates in your training? Best wishes.

I just bought a practically new 600 E. The tension mechanism was a little gummed up from its lubricant sitting for years. I watched the video on fixing tensioners on the MD2992 channel, after which I was able to disassemble and clean the tensioner. Adjusting the tension as I reassembled it was a lottle finicky, but not bad. I also cleaned and lubricated the machine. It sees like a champ! That bracket holding the "reel" doesn't work like that on my machine. It hinges up and catches. Maybe that piece is the problem, not the reel.

Oh my goodness! Thank you so much! I never would have realized my bobbin case was supposed to be lodged in the cover plate !!! ❤

rhank uuu . this is my first time sewing and i thought i had broken it and i was so frustrated with myself.

I’ve had it with mine. I’m giving it away. I should have never bought a singer sewing machine. I’m going back to my 1908-1920(? )White Rotary. It doesn’t give me these issues, I can actually sew something right quick and not have it turn into a several hours long fiasco! Or in this case, I am on day 3 of the ford/dodge equivalent of sewing machines just trying to sew a 2 inch space on a t-shirt my dog accidentally snagged. Screw this singer machine, I’ll use the white machine. All I can say is F this singer machine, F these problems. Anyone want this stupid machine hit me up, you can have it! It’s a waste of the money I spent on it. I shoulda spent it on buying new pieces for the White Rotary. I’d also like to thank singer for the piece of needle I had to pluck from my cheek bone when the needle snapped, popped the housing cover off of where the bobbin puzzle is and send the needle tip right into my face. Pretty sad when I need to where safety goggles to operate a sewing machine that is far newer than the dinosaur sitting in my sewing room.

I would like a copy of the featherweight bobbin comparison

I would like the side by side bobbin comparison

Thank you for this video!! So simple and helpful, you prevented me from losing my sh!t when this happened- I thought I broke it!!🙏🥳❤️

The whole inside of the thing you are supposed to stick the bobbin in has fallen out of the sewing machine. How do I put it back in, so I can then put my bobbin back in?

My bobbin case spins, and then the needle hits it and breaks. How can I make the bobbin case stay put where it belongs? Nothing looks wrong with it, but even though it's snapped in, feels snug, threads correctly, as soon as I try to sew the bobbin case moves out of place and I have to start over. Help!

New to sewing. Haven't had any problems until I broke a needle sewing too thick fabric. ( I didn't know about needle matching to fabric). Now replaced needle but cannot get bobbin thread up as usual. Have done checks on threading to and bottom, checked bobbin casing, reread manual. No joy. Frustrated as sewing shops/repairs no longer available near me. Any advis?e

Janome is BANKING on these $50 bobbin cases 🤬

Bobber issues

Can’t get that in australia unfortunately

My Singer HD 6800 just started wrapping the top thread around the feed dogs from underneath near the bobbin. Tension was good, sewing along with a decorative top stitch, and it just stopped. Cleared, cleaned, rethreaded, and again. Your thoughts? Bobbin case looks great.

going to try this on a vintage book press thanks for the tips

The needle hits the angled metal thing that goes around the bobbin and snaps the needle. Any idea why?

Hello, I’m having major issues with nesting. My top thread bunches up pretty badly within the bobbin case which is creating those ugly nesting balls. I’ve tried changing the tension knob to almost every single number. I even took out the bobbin case to examine it & I don’t have any needle holes nor have any damage to the case whatsoever. I’ve turned the tension on the case both ways to loosen & tighten to see if either works, and of course nothing worked…it still creates nesting! I’m literally losing my mind over here because I’ve been trying to get this machine to work for over a year now & no matter what I try nothing has worked.

How does that affect tension

Trying to troubleshoot my needle not lining up to center. Needle is inserted correctly with flat side to left. Also, the presser bar is lined up correctly with the little lines. Needle sits very close to left side of hole in needle plate. It also rubs a bit on the left side of original presser foot. Help!! Any ideas what else could cause this misalignment. I’ve tried four different brands of needles with same result. I have a 1949 featherweight 221

You fixed our problem!

THANK YOU!!! Found a little 'tail' that I cut away and voila!! This fixed the problem of thread bunching in the back of the fabric. Savid my quilting day--was ready to give up.

Thank you so much! I have a last-minute project and this just saved me 🙏🏽❤️

Hi I’m a 59 year old man, that was Willed to me, this beautiful machine. I am trying to learn how to use this machine. So far your videos have been very helpful. I have subscribed to your page. Wish me luck. 👍🏼

I have been fiddling with my 603e i just got all day. It will wind a bobbin just fine, but wont sew. When trying to sew the top thread just wraps around the bobbin. I followed this video, rethreaded, cleaned, oiled, checked everything. Upon closer inspection of the manual for sewing after inserting a bobbin, i think the issue is that the the machine isnt bringing the bobbin thread up. When i try to get the bobbin thread to come up through the throat plate to create the loop so i can grab the threads, it doesn't come up, and if i keep turning the wheel, thats when the top thread starts winding around the bobbin. How do i fix this?

I signed up and have the app on my phone. Is there any way that I can do this on the computer or connect it to my TV so it's bigger for me to see? Thank you 😊😊