Thank you! Excellent step by step and narrative guidance.
@chrishoward11898 күн бұрын
Thank you. Now I know not to buy this😂
@CaliGirl868616 күн бұрын
Lmao! 😂 😂 This is very helpful but a lot of work!
@amitmaharaj162420 күн бұрын
I did up to removing the blade and clean it and upon putting it back it now has a noise from the top bearing. If i hold it the noise stops. Any tips on fixing this or is it broken?
@howdoidothisone20 күн бұрын
Try to open and see if the clips have been aligned correctly. It sounds more like a loose fit that’s causing the noise
@amitmaharaj162419 күн бұрын
@@howdoidothisone I opened it twice and checked. It's the top connection of the blade is the issue. If I turn it on and hold the metal piece while the blade spins there is no noise. Once released it makes noise
@howdoidothisone19 күн бұрын
Watch the video again and see if the fan blade assembly has been reseated and aligned correctly. Also are fittings are made tight. I’m sure it’s something minor that we are missing.
@CaliGirl868616 күн бұрын
Your problem is exactly why you shouldn’t do it. lol
@augustinflores58926 күн бұрын
Thanks! It worked perfectly.
@keic777629 күн бұрын
Would be more helpful if you had a brighter light showing the procedure. This is too dark to see it clearly.
@howdoidothisone29 күн бұрын
@keic7776 - thank you for your feedback. I really appreciate it. . In my future videos I’ll make sure I’ve good lighting.
@RIP69Ай бұрын
Two (much easier)steps! 1. Unplug fan, take outside. 2. Use your leaf blower and blow the crap (dust) out of it! 😊 You're welcome. 👍
@howdoidothisoneАй бұрын
That’s smart. I didn’t think about it.
@ukelilly2 ай бұрын
they make it so hard to clean. Shame on them. Worth trying before giving up. thanks
@howdoidothisone2 ай бұрын
You’re welcome. Try and let us know.
@salon1audio-florida5292 ай бұрын
Thanks you for a concise and easy video. Right to the point. Watched it for a minute and was done in 2. Thank you!
@howdoidothisone2 ай бұрын
I’m glad it helped you
@jaimeramirez62742 ай бұрын
Esto es muy complicado y dá margen a perdedera de tornillos. Por eso, nunca pasaran de moda,los ventiladores tradicionales ; son mucho mas faciles de limpiar y hasta se pueden lavar las áspas
@arun90332 ай бұрын
Thank you so much - also checking if the power button flashing is ok?
@TH-rn8hf2 ай бұрын
I'll not dare do it. I might not be able to put it back together. A lot of screws I might misplace some.
@howdoidothisone2 ай бұрын
Try to label the screws if you feel you may miss them.
@TH-rn8hf2 ай бұрын
This is not my forte. Sorry.
@hongostoorizabayalrededore8513 ай бұрын
Muchas gracias, lo desarmé, limpié y volví a armar sin problema, muchas gracias
@jamesvopni24583 ай бұрын
Easiest cabin air filter I’ve done yet. Thanks for the concise tutorial!
@howdoidothisone3 ай бұрын
You’re welcome.
@ChicagoSince80s3 ай бұрын
If I take it apart I might never put it back together
@hymer223 ай бұрын
Thanks for a detailed video … I was able to clean the tower fan just following your video
@champ74103 ай бұрын
90% or more could’ve been edited out. Watching someone remove screws is as exciting as watching the grass grow.😢☹️🤦♂️. Apparently he doesn’t know how to edit
@ashleysnyder48754 ай бұрын
Talks to much (for ex- I'm trying to see the part where you take the actual spinning part out and all he's talking about is dust for 10 minutes)
@bucketoflove614 ай бұрын
Thank you very, very much! My fan was disgusting I had no idea about the the T-15 screwdriver. Since I use that for my ring doorbell, I was able to use it for the fan. I took the fan apart and she is running like a dream!! Lasko has been keeping this a secret
@howdoidothisone4 ай бұрын
Excellent!
@Nellybelly84 ай бұрын
Dang, I was just thinking maybe the front popped off.
@amandaolson3534 ай бұрын
That's what I was hoping but I think it has to be unscrewed
@purpleboxer335 ай бұрын
Thank you! I just did this all by myself with your super simple instructions
@sovereignty195 ай бұрын
so it should still blink red
@sylviamenezes24455 ай бұрын
I have a kitchenaid electric stove which showed error FE80(cooling fan running slow). I changed the cooling fan but it still shows the same error. I cleared the faults and even did a control reset but it still shows the same error.. What's the next step?
@howdoidothisone5 ай бұрын
I’m not sure about kitchenaid. May be check with manufacturer or see if any reset button is available.
@alainprevost53745 ай бұрын
After several years of service, the dampered bushsing shown at 9:17 (the one with the screw) weared off, so the whole blade fan cylinder fell on top of the motor, is it replacable?
@destroyerofgalaxys5 ай бұрын
Why am i watching this lol. I was randomly holding my fan for some odd reason and i hear this most meachincal failure of a screech for a deafing 2.2 seconds before turning the fan off. I turned it back on like 2 mins ago and found out the thing that makes the air come out broke and a hum comes from the bottom of the fan.. Wtf did i do? Did i just accidentally assinate my sleeping fan? I kinda turned it weird tho sooo.
@breezmatic3176 ай бұрын
Informative he took it all the way apart 😂 I just took the back off and the fan blade out
@iran7476 ай бұрын
Thanks for posting!
@howdoidothisone6 ай бұрын
You’re welcome
@MsKrissySoSweet6 ай бұрын
This seems to be a lot of work. However, the video is very thorough and informative. I’ll give it a try but may buy another fan. Thank you
@howdoidothisone6 ай бұрын
@MsKrissySoSweet - try it out you’ll be glad you did.
@ahamgham7 ай бұрын
Thanks man!
@horrorbiz727 ай бұрын
Thank you for this video! This is exactly what Lasko should be putting out. Thanks for posting! (Not that vacuum and wipe down the grill junk.)
@AloGonzalez7 ай бұрын
Thanks for a short and straight to the point tutorial !
@rickmazza34027 ай бұрын
Thank you! Nice job!
@EricXVII8 ай бұрын
Excellent video, thank you for showing this so clearly.
@cegimad8 ай бұрын
Perfect tutorial. Finished in 2 min
@howdoidothisone8 ай бұрын
That’s sounds great
@guillaumesueur60229 ай бұрын
Thank you so much ! Works with electric cooking too !
@ReverendDrengr9 ай бұрын
thank you, this was very helpful! We had 3 and cleaned them all and they sound new now. 👍🏻
@howdoidothisone9 ай бұрын
@ReverendDrengr i’m glad it was helpful
@Chiquivalero9 ай бұрын
Did you say we need a T15 screwdriver? (for the 16 screws on back of the fan)
@howdoidothisone9 ай бұрын
@Chiquivalero Yes it’s T15 screw driver
@MIGIRLBA9 ай бұрын
Thank you so much! This is exactly the help I needed. 🙂
@howdoidothisone9 ай бұрын
Glad it helped!
@willischung640710 ай бұрын
Thanks for posting this video! Your instructions were great! Saved me a lot of time.
@howdoidothisone10 ай бұрын
I’m glad it helped.
@juliocesarpatricio685610 ай бұрын
thank you
@SupremeSpeaking11 ай бұрын
What screw driver did you use to take out the fan part that makes the air when it spins… I can’t take it out lol and I’ve taken it out on another unit
@howdoidothisone9 ай бұрын
@SupremeSpeaking - I used regular Philips screw driver
@Jbach161211 ай бұрын
Fantastic video. Thank you so much!
@howdoidothisone11 ай бұрын
You’re welcome
@tylerhicks193011 ай бұрын
I did all this and now the motor won’t spin lol
@howdoidothisone11 ай бұрын
Just make sure all cables in good condition and connected.
@BH-ip6ds Жыл бұрын
Hi - thanks for the info. I did notice the air flow indicator on the old filter was pointing upward. The replacement filter I bought looks like yours but installing it the way you did (agree with you that it looks like it should be installed that way) mean that the air flow indicator is pointing the wrong way. Not sure how much this matters but it seems like it does matter if both filters bother to point out orientation.
@BH-ip6ds Жыл бұрын
Hey - my bad. It looks like the dealer put the filter back in upside down (yours was upside down also which is what threw me off). You installed the filter the right way as the airflow arrows should point down. Thanks again.
@sherit8594 Жыл бұрын
This is a WHOLE lot of Work that the company Langsko should provide. Thanks for the demonstration though
@howdoidothisone Жыл бұрын
You’re welcome
@user-mj9sy4jt6e Жыл бұрын
Thank you. I personally needed the step by step details. I appreciate.
@howdoidothisone Жыл бұрын
Glad it was helpful!
@cesarc.gutierrez6319 Жыл бұрын
You need take all pieces to clean it ??😮
@howdoidothisone Жыл бұрын
Yes
@hum321 Жыл бұрын
I'd just buy another one.
@L-th3od Жыл бұрын
I cant slide it off, why is that?
@howdoidothisone Жыл бұрын
Which part are you referring to?
@VIpanfried Жыл бұрын
I just clicked to find out who calls the window blind slats “flaps”. Agree that vinegar is better option than chlorine bleach!