2023 moomba max HRD locker nets
1:08
Пікірлер
@ayyvee5757
@ayyvee5757 2 күн бұрын
Can’t wait for the next video on the jog!!
@TheJimmysGarage
@TheJimmysGarage 2 күн бұрын
Parts are rolling in, 012 exhaust from Brazil comes next week, same for the new Pedro Racing digital cluster. Plastics got delayed though :(.
@aliozkamil743
@aliozkamil743 3 күн бұрын
Hello, I also bought same digital speedometer for my 1998 Suzuki Address V100 (btw Yamaha Jog and Suzuki Address V100 - V50 have exactly same speedometer). I connected all wires apart from rpm input wire., installation manual doesn't clear how to connect it. Some of internet sources suggest to wrap rpm input wire around spark plug wire. But I saw that you directly connected it to coil. Which side of coil you connected rpm input wire + or - side?
@TheJimmysGarage
@TheJimmysGarage 3 күн бұрын
Positive side. Intersting about the suzuki address information, thanks.
@itzneak0o
@itzneak0o 4 күн бұрын
I like the amsoil dominator...but what head lights are u running on ur yellow prebug...i saw ur ig story the other day...its bright!!!! I neeed lol😊
@TheJimmysGarage
@TheJimmysGarage 3 күн бұрын
I like dominator as well, good oil! Here is the LED bulbs I am running - amzn.to/3DtNvsX
@itzneak0o
@itzneak0o 3 күн бұрын
@TheJimmysGarage thank you!!!
@TheJimmysGarage
@TheJimmysGarage 3 күн бұрын
@@itzneak0o no problem, they're cheap, bright! and LED White!
@itzneak0o
@itzneak0o 3 күн бұрын
@@TheJimmysGarage exactly...i gotta look for 1 that fits a dioo lol
@41-willys99
@41-willys99 6 күн бұрын
try more light above the finish line sensors. that may help it see the car go through it.
@TheJimmysGarage
@TheJimmysGarage 5 күн бұрын
Forsure, thanks!
@watafomyfren8213
@watafomyfren8213 Ай бұрын
How can you tell the torque spec, with the combination wrench 😂😂😂
@TheJimmysGarage
@TheJimmysGarage Ай бұрын
The same way the dealer checks it, they don't :)
@JoshRus
@JoshRus Ай бұрын
How are both projectors on for yours? I’ve only seen the top ones go on in other videos?
@TheJimmysGarage
@TheJimmysGarage Ай бұрын
@@JoshRus as their description states, the top projector is hi-lo. Bottom projector is just for looks. They put a very low power led behind it so that it illuminates as just a type of running light.
@itzneak0o
@itzneak0o Ай бұрын
What tire size did u go with with the purple elite??
@TheJimmysGarage
@TheJimmysGarage Ай бұрын
Those are 90/90-10 Pirelli Angel, love them!
@itzneak0o
@itzneak0o Ай бұрын
@TheJimmysGarage thank you
@Bluebenny-y6m
@Bluebenny-y6m Ай бұрын
Are you in the silver lake Kansas?
@TheJimmysGarage
@TheJimmysGarage Ай бұрын
Michigan
@heavypedaling1729
@heavypedaling1729 Ай бұрын
Truck looks awesome, I've got an 02 excursion and I just noticed my lights don't flash or come on when unlocking or locking the truck with the fob like yours. Is there something in forscan or a vehicle switch sequence that you did to make that work with your truck?
@TheJimmysGarage
@TheJimmysGarage Ай бұрын
Hmm not sure about forscan but it may also be because I am using a Viper remote start/keyfob to unlock and lock.
@JamesWelborn-m8k
@JamesWelborn-m8k 2 ай бұрын
Jeromy Shoal
@Dylan-f9w
@Dylan-f9w 2 ай бұрын
That kid in front of you seems like a d bag 😂 would not let up
@Smelly0greButts
@Smelly0greButts 2 ай бұрын
So the front and rear dif run the same fluid? I just want to make sure I get it right, awesome vids on the juke 👍
@youknoweverything7643
@youknoweverything7643 2 ай бұрын
I love my viper racing alky purpose built ho drag slot car it's rtr and a purpose built drag car and I have won 100 dollars total so far running friends for money doing grudge races I have a 1/24 scale 1/4 mile and 1/8 mile drag strip and a 1/4 mile and 1/8 mile ho drag setup and in-between the 1/24 races we run ho as well and run grudge races no prep on both tracks allowed no tire prep or anything to keep the lanes clean and more of a challenge especially in 1/24 scale lol. I have not told them where I got the alky funny car from cause I'm using a mustang body on the viper 6 ohm alky rtr funny car to make it look like it is just a cheap ho slot car
@TheJimmysGarage
@TheJimmysGarage 2 ай бұрын
Hahaha that sounds like the perfect plan to keep on winning.
@HuttVita-w2o
@HuttVita-w2o 2 ай бұрын
Hall Joseph Young Dorothy Davis Scott
@TheJimmysGarage
@TheJimmysGarage 2 ай бұрын
Yea they've been busy
@StracheyAnnabelle-w8c
@StracheyAnnabelle-w8c 2 ай бұрын
Jones Betty Williams Betty White Mary
@TheJimmysGarage
@TheJimmysGarage 2 ай бұрын
Donald, Mary, Bary, Joseph
@sheevanorway3959
@sheevanorway3959 2 ай бұрын
Is it the same carburetor of yamaha vino 50cc?
@TheJimmysGarage
@TheJimmysGarage 2 ай бұрын
If it is a 2 stroke.
@silent_glory6244
@silent_glory6244 2 ай бұрын
Pls tell me u didn’t put 4t in the 2 smoker
@TheJimmysGarage
@TheJimmysGarage 2 ай бұрын
Nope, I put the OEM gear case oil for this bike, into the gear case.
@JPBrasca
@JPBrasca 2 ай бұрын
Awesome video man! Super helpful, I appreciate the shared knowledge!
@TheJimmysGarage
@TheJimmysGarage 2 ай бұрын
@@JPBrasca thanks for watching!
@jashsk8z686
@jashsk8z686 3 ай бұрын
Thank you sir! U made my day. Just got one myself. 🎉 FOR FREE. def gonna need a ton of love. Will b watching ALL the videos to this series.
@jashsk8z686
@jashsk8z686 3 ай бұрын
AND SUBSCRIBE
@AUSTIN_457
@AUSTIN_457 3 ай бұрын
This came up in my recommended videos lol. This is Austin with the ktm 150 🤙🏻 i subbed
@TheJimmysGarage
@TheJimmysGarage 3 ай бұрын
Whatsup dude!
@cimodroid6080
@cimodroid6080 3 ай бұрын
noice!
@iitsbryzze8738
@iitsbryzze8738 3 ай бұрын
Update? I’m thinking about buying a pair and I’m wondering how they hold up in motocross
@TheJimmysGarage
@TheJimmysGarage 3 ай бұрын
Sold the CRF450r to my buddy, he did 4 track days on the bike with me, then it got stolen from his garage...
@Ebk1988
@Ebk1988 3 ай бұрын
I’m having trouble installing my 05 Oreo series to my 2000 excursion any install video pls
@TheJimmysGarage
@TheJimmysGarage 3 ай бұрын
Having trouble with the physical fitting? Or the wiring?
@Ebk1988
@Ebk1988 3 ай бұрын
@@TheJimmysGarage wiring ?did I need to order adapters for my 2000 to 2005..
@TheJimmysGarage
@TheJimmysGarage 3 ай бұрын
@@Ebk1988 Adapters I used - amzn.to/48JEDdw
@Ebk1988
@Ebk1988 3 ай бұрын
@@TheJimmysGarageI ordered them they’re here now and they fit,what about the other plug not the one w the now adapter or the one that’s on the end but the plug that looks to be below the headlight one on the excursion housing
@TheJimmysGarage
@TheJimmysGarage 3 ай бұрын
@@Ebk1988 I used the adapter to plug in the main headlight part, and then on my stock blinker connection I broke the little clip off and it plugged into the Alpharex headlight plug just fine. The adapter they come with is just if you want to tap it to switched 12v so that the running lights are always on.
@fordsixhoe1184
@fordsixhoe1184 4 ай бұрын
Those are sick... But dayum, I think I'll wait til I need to replace the ones I have now.
@codymitchell4682
@codymitchell4682 4 ай бұрын
How did u get the original turn signal on the mirrors swapped out with the LED’s
@TheJimmysGarage
@TheJimmysGarage 4 ай бұрын
amzn.to/3J3Zb5i
@codymitchell4682
@codymitchell4682 4 ай бұрын
@@TheJimmysGarage I already bought those I meant like how did u physically swap them? Do the original turn signals just pop out?
@TheJimmysGarage
@TheJimmysGarage 4 ай бұрын
ahh - kzbin.info/www/bejne/aXKweXmGeZt_Y7s
@kingkaimen
@kingkaimen 5 ай бұрын
I have a 2000 7.3, i live the look of mine. But mine are no where near the brightness? The side marker/drl lights are fine, so not sure if its a wire problem and should just rewire my 20 yesr old wires or I'm missing something; or just faulty lights; in which case id be screwed since I've cut into the header and cant put my old ones back on and wait for a replacment.
@TheJimmysGarage
@TheJimmysGarage 5 ай бұрын
Hey, why did you cut anything? If you use the plug and play adapters in the description they should work fine. The lower projector should come on when you turn your headlights on.
@kingkaimen
@kingkaimen 5 ай бұрын
@@TheJimmysGarage I had to cut the header to fix the light assembly, since these 05-07 light's will not just fit right into the 99-04 style header. I had not cut any wire's just got he wire adapter's. And maybe the wires adapters are bad? Ill need to start by just checking ALL the wires for any tearing or bad connections first then just try new wires if they all look good. The truck is already a wire rats nest from previous owner's and needs to be gutted and cleaned out, have only been working on mechanically making her strong the last few months this was my first look update to the truck.
@Adam-so8qx
@Adam-so8qx 5 ай бұрын
How are you liking the luxx headlights now?
@TheJimmysGarage
@TheJimmysGarage 5 ай бұрын
No better option!
@Ebk1988
@Ebk1988 5 ай бұрын
Luxx series worth it that much over pro series ? Or its fine with some led bulbs
@TheJimmysGarage
@TheJimmysGarage 5 ай бұрын
Luxx is FAR better, but the Pro will suffice with LED bulbs. Luxx is as good or better than alot of OEM LED headlights.
@Ebk1988
@Ebk1988 5 ай бұрын
@@TheJimmysGarage also is the white brightness on the daytime running lights the same on both or does that change?
@TheJimmysGarage
@TheJimmysGarage 5 ай бұрын
@@Ebk1988 if you use the supplied DRL harness the white is brighter.
@Ebk1988
@Ebk1988 5 ай бұрын
@@TheJimmysGarage nice I just meant is the luxx brighter than pro series or are they the same when it comes to the drl white bar
@TheJimmysGarage
@TheJimmysGarage 5 ай бұрын
@@Ebk1988 THeyre the same lights. Just one has a OEM quality LED beam and the other is halogen.
@jasont7887
@jasont7887 6 ай бұрын
Thank you for the fast reply and the video, I’m kinda stupid when it comes to stereos amps, receivers etc. it looks like this is going to be fairly simple and cost effective. I’m gonna order one. Thanks again
@jasont7887
@jasont7887 6 ай бұрын
I’m looking for a stereo upgrade on my 2012 moomba mojo. It looks like this might be the best option, but two questions. 1) does it completely eliminate the receiver in the glove box? 2)do you connect the black box to the original equipment easily or does all that need to be redone also? Thanks in advance
@TheJimmysGarage
@TheJimmysGarage 6 ай бұрын
The only difference in this setup is that instead of a traditional receiver, you now have a black box.. same connections as any receiver. I then bought a single din plate to block off the hole in the glove box- amzn.to/3xHdUAS
@JayDoo7
@JayDoo7 6 ай бұрын
Do you have any experience with the oil injection. My sons zuma is using excessive oil and smoking a lot. Any info is appreciated. Ty
@TheJimmysGarage
@TheJimmysGarage 6 ай бұрын
Interesting, I do not know what would cause that. What happens if you dont have oil in the tank and run premix?
@traviskruse2153
@traviskruse2153 6 ай бұрын
What cab lights are you running? All goes well together
@TheJimmysGarage
@TheJimmysGarage 6 ай бұрын
It's in the description but here is the link amzn.to/3J54r8A
@DavePena-zq7id
@DavePena-zq7id 6 ай бұрын
The Alfa is an AGM/Top-Racer car. It’s VERY fast on the drag strip at 20+ volts since it’s designed to run at 12v. It’s wired like a 1/32 car which is reversed polarity from US HO. To get it to run, you need to unsolder the the motor leads, flip the motor, and re-solder the motor leads. If yo want the LED light to work, you need to unsolder those and swap the red and black connectors and resolder. You may also need to shave the guide pin to make it thinner and spread the braids wider to contact the rails better. These are faster than the MicroScalextric cars on the drag strip. Could challenge the Viper Alky funny car for real.
@TheJimmysGarage
@TheJimmysGarage 6 ай бұрын
Thanks!
@dontblameme6328
@dontblameme6328 6 ай бұрын
Did you have any issues with aiming? The 03-04 stock lights have different asjusters than 05+. Seems like tou have to pull them and resinstall several times to make aiming adjustments ?
@TheJimmysGarage
@TheJimmysGarage 6 ай бұрын
That's correct, luckily pulling them out is just 3 screws. It took me probably a half hour to get them aimed perfectly.
@7.3power
@7.3power 6 ай бұрын
Hey man how did your wire up the mirrors so they have running lights a turn signals?
@TheJimmysGarage
@TheJimmysGarage 6 ай бұрын
Tapped the running light wire that goes to the running light bulb in the head light, same for blinkers.
@Ozzy2341
@Ozzy2341 7 ай бұрын
Great video what bumper is that ?
@TheJimmysGarage
@TheJimmysGarage 7 ай бұрын
It came on the truck I wish I could find it online but I don't see it anywhere
@7.3power
@7.3power 7 ай бұрын
What kinda or Brand of mirror are you using?
@TheJimmysGarage
@TheJimmysGarage 7 ай бұрын
Mirrors - amzn.to/49rr3Lb
@7.3power
@7.3power 7 ай бұрын
Sweet thanks! How hard was it to install the head lights I have the same truck and I am looking at buying them.
@TheJimmysGarage
@TheJimmysGarage 7 ай бұрын
@@7.3power I followed this guide, plug and play if you use the adapters in my description. www.riffraffdiesel.com/content/RESOURCES/Riffraff_Diesel_05-07_Headlight_Instructions.pdf
@7.3power
@7.3power 7 ай бұрын
Sweet thank you!
@aellis15
@aellis15 7 ай бұрын
Did you get this recently? Also how much and where from?
@TheJimmysGarage
@TheJimmysGarage 7 ай бұрын
I got it when the video was posted, August 8, 2023. It was from my Moomba Dealer, Club Royale Boat sales. 248.681.9100. You can even mention that you want the same engine tray that Jimmy got for his 2014 Mojo 2.5. This is the part # 119402 from Moomba.
@gottatry9057
@gottatry9057 7 ай бұрын
Your video is what made me decide on these lights for my wife’s 2002 Superduty. I have morimoto on my Dodge and have to say I like the quality of these Alpha Rex very much! Drl and turn signals work well, however only the upper projector is illuminating. When I activate the trucks high beams, the upper projector changes. In your video it looks like both upper and lower projectors illuminate. Did you experience this at all?
@TheJimmysGarage
@TheJimmysGarage 7 ай бұрын
The upper projector is the Hi and Low beam. The lower projector is just a running light with very low power led bulb.
@313cbrown
@313cbrown 7 ай бұрын
I have the alky funny car. I blew the gears 3 times because of the lexan body. I took it off and put a tyco body on and haven't had any problems since I swapped them
@UnMeDiKaT3d
@UnMeDiKaT3d 7 ай бұрын
Did you have to rewire the blinker pigtails? Because mine ain't plugging into the rex supplied plug in the housing it's not much different but different enough.. i also have an 02 but upgraded to the 05 panel and lights everything has been plug and play til now.. also you tapped into fuse 8? For the start up? Looking at also running that
@TheJimmysGarage
@TheJimmysGarage 7 ай бұрын
I used these - amzn.to/48JEDdw and didn't have to do anything with blinkers, was all plug and play.
@TheJimmysGarage
@TheJimmysGarage 7 ай бұрын
For the running lights to stay on when the truck is switched on I tapped fuse 8.
@UnMeDiKaT3d
@UnMeDiKaT3d 7 ай бұрын
@@TheJimmysGarage that's so weird in an 02? I had to splice the newer plug from my harness to fit i got that figured out i was just left with the running lights so thanks dude!! I'll probably come back to this whenever i get around to my roof lights cuz mine don't work rn and seeing yours do the start up flash is sexy 😂😂
@TheJimmysGarage
@TheJimmysGarage 7 ай бұрын
@@UnMeDiKaT3d So with the plug and play harness from amazon you still had to splice your headlights in?
@UnMeDiKaT3d
@UnMeDiKaT3d 7 ай бұрын
@@TheJimmysGarage ya at least the blinker plug i did it was way different than what i got with the headlight assembly i thought that was weird considering both our trucks are 02s lol
@mountebank5207
@mountebank5207 7 ай бұрын
Stumbled across this, sounds mean asf
@TheJimmysGarage
@TheJimmysGarage 7 ай бұрын
Thanks!
@CysMix1
@CysMix1 8 ай бұрын
Howd you tap into the wiring for start up sequence
@TheJimmysGarage
@TheJimmysGarage 7 ай бұрын
There is nothing to tap for that, when you turn your headlights on they the do the startup sequence. The pro series does not do this, it must be Luxx series or Nova Series
@louiecan
@louiecan 8 ай бұрын
Where did you tap in the harness for drl animation with unlock? I have a 2003 7.3. I per alpharex tapped into 12 obs2 cigar lighter and they are always on?
@TheJimmysGarage
@TheJimmysGarage 8 ай бұрын
Hey, I didn't tap anything but the running light wire to switched 12v.
@JeffWalker84
@JeffWalker84 8 ай бұрын
Sweet video man! If you don't mind a suggestion, I would recommend rolling your bars back quite a bit. It looks like you're getting a lot of front end tuck because of too much weight on the front end. If you look at your bike from the side, the angle of your handlebars should be in line with your fork angle (or slightly angled backward). That will help a ton
@TheJimmysGarage
@TheJimmysGarage 8 ай бұрын
Interesting thanks, yea I haven't touched the bike other than ecu, so the dealer set it up wrong I guess?
@KevG
@KevG 8 ай бұрын
Felt like I was there🤝🏼🤝🏼great vid homie
@TheJimmysGarage
@TheJimmysGarage 8 ай бұрын
Should join us!
@CameronPritchard-ll5gq
@CameronPritchard-ll5gq 8 ай бұрын
I was there 😂
@kevinmiracle8233
@kevinmiracle8233 8 ай бұрын
great vid man! memories came flashing back when i was kid and raced out there! track has changed a little.. Maybe i'll bring my GasGas Ex250F out there and spin a few laps this year!
@TheJimmysGarage
@TheJimmysGarage 8 ай бұрын
Always a good time, Baja was awesome!
@hkycoach9616
@hkycoach9616 8 ай бұрын
did you install yourself. if so do you offer install service locally
@TheJimmysGarage
@TheJimmysGarage 8 ай бұрын
Yes I installed myself. What boat do you have and what area are you in?
@hkycoach9616
@hkycoach9616 8 ай бұрын
@@TheJimmysGarage 2014 moomba mondo
@hkycoach9616
@hkycoach9616 8 ай бұрын
@@TheJimmysGarage sorry Brighton
@TheJimmysGarage
@TheJimmysGarage 8 ай бұрын
@@hkycoach9616it's a pretty easy install on that boat. I'm in Royal oak, but if you have the factory Sony radio it's an easy install. Club Royale in Waterford could install it mentioned my name or show them this video.
@dawsonsnapp5553
@dawsonsnapp5553 8 ай бұрын
How did you attach the controller to your boat?
@youknoweverything7643
@youknoweverything7643 8 ай бұрын
I also use them as cheap drag cars to do ho drag racing with ny buddies so i dknt havr my expensive nice ho scale purpose built drag cars cause they so fast they will go flying off the track while drag racing if not careful and plus i dont like putting laps on my expensive purpose built ho cars i use for money races, pink slip races and cahs days we do
@youknoweverything7643
@youknoweverything7643 8 ай бұрын
Or do what i do the new scaletrix micros use a 4 lane track and run them together as a two lane at 9 volts they fly