Great video, i want to ask is it possible to put 2inch spacer with the stock shock? Or the same thi g will happen? Thanks

I am in between the frontier2024- and Tacoma 2024- I love the Tacoma so freaking much the way it drives the looks but that 4 cylinder I don’t know about the Nissan I hate the way it drives looks good but the motor I trust. Now they are offering 8-10 g off the 24 Tacoma I just don’t know trd off road prem I’m looking at.

I wonder if backwoods adventure mods will have a roof rack for the new Tacoma. They make solid armor. MOORE 2025 collab?

Oh brother

If you're Tacoma springs are as good as the frontier springs you guys should do very well. The Toyota market is so deep you just gotta get the word out there.

Koni vs dobinsons ims series on the d40 frontier?

Donde lo compraste

Glad to see you guys working with some of the base model trucks. I have a Nissan Frontier S.

P4X LOL plates incoming

Nice color. the new Taco's look pretty good. I prefer my 2023 Frontier PRO4X. Be interesting to see the goods you come up with for this new generation of Tacoma.

Expanding the business! I'm hopeful to get my lift in 2025.

So if you have a second gen X with no airbags in the seats what happens? Can you use the airbags still that would be AWESOME and a definite upgrade

Have a 2012 FJ all stock would like to start my 1st upgrade to be shocks thanks for making this video 👏🏽

How much that price?

It took me a weekend with jackstands and on gravel but I’m old in my early 50’s. Absolutely love the RcKilla kit. Rides like glass. I opted for ADO’s upper control arms as well with the pressed ball joint. I always thought the Frontier’s sat low especially for the tire size it came with. As soon as I bought this truck I ordered this kit. Probably staying with this tire size but the wheel well looks to have the right amount of space for up travel now.

Informative and quick to the point. Advice from someone who actually uses their own products is priceless!

Thanks for this video. I was stoked on possibly buying the bilstein 6100, but yea messing with the lower control arms is going to be a pass for me. I just bought this truck and yea don't wanna mess with the warranty. I'll just wait and get the icon lift later. Thanks for the video though. 👏

Are there down sides to swapping in the Titan rear axle? Seems that would be better than spacers off-road.

Would there be any benefit from a tie rod flip? I am doing it on my Jeep to fix steering geometry, at full droop it looks like the rod ends are nearly maxed, from my couch here. 😅

Do the Titans have the same wheel bolt pattern? Asking because of the limited wheel options for the Frontiers.

I might have missed something, but if the axle is hanging too low for the shock to bolt in, it would be too short at droop on a trail. Is he gonna add a limit strap to save his shocks?

I have 6112 on my 2018 Taco. Rides great! Handling is body roll is min if any and so is nose dive.

Do these sit lower than the factory 2nd gen seats? I’m trying to find a swap that sits lower.

install an ARB rear diff cover

I’m interested in putting rough country’s 2.5 inch 3N struts and suspension lift in my 2012 frontier sv. Even tho it is not the spacers, Would this result in the same problem?

I need these in yellow

I bought my 2019 S crew cab 2wd new in September of 19. I knew it was gonna be the last year for the 4.0 engine, manual windows and locks, and a keyed ignition switch. Did the All Dogs Offroad diff breather swap, added aftermarket wheels, Weathertech floor liners and vent visors...typical small mods that Frontiers get. It's been flawless for 5 years and 47,000. The original battery even lasted for almost 5 years 👌

What about the spring ????

How much height do either of these add? On a 2023 king cab s model ?

I just noticed a crack in this exact spot… and it’s a significant crack. Calling Nissan tomorrow :/

Would be in for over $2000.00 in Canada installed. Deal breaker. Sold the frontier and buying used Tacoma which is the correct height from the factory. Nissan engineers are idiots.

where did yall find that front aftermarket skid plate with the spots for the amber LEDs? i would love something like that for my Titan. Looks to have some kind of eagle on the front humm

I wish I lived close enough to you guys to let you do mine! Awesome job!

So i did do a spacer and shackle lift from nisstec when they were still a thing, amd i do intend on getting better upcs. Question is, can i still install the rckilla Kit with my spacers on before i upgrade my upcs?

For a 3rd gen Tacoma curious about using a 5125 over the 5160

Awesome research!!! Does the back bench fit also?

How much wind noise do you get from the clamp at the top of the door

Hmmm were you able to adjust for the holes in light coverage with the low beams?

My shop is charging $1200 to install these….and they recommend replacing top hats. Ill be doing it myself just need to order them this weekend 😂

I have a 2024 Pro 4X and want to get a 1.5"-2" lift/level, what would be the proper way and kit to do it? Great info n video👍

Which bilstein are suited for a 98 dodge ram 5.9 magnum gas 4x2 rear wheel dr stock susp right now

I have been rebuilding G13a & G16a engines for the last 7 years. The burn through between the cylinders says 2 things. i) it’s got very hot or ran very warm for a long time. ii) the head needs checking for flatness & probably a skim. Something I’ve found with these engines over time & age is that sometimes the head bolts themselves can stretch causing the head gasket to burn through. It can be a real pain the arse & it is a ‘while I’m in there, I might as well …’ skim the head & check the top of the block for flatness. Got burnt with that on my first 2 rebuilds.

Where’d you get the front bumper? And skid plates

remember to use anti-seize in the threads of them sparkplugs

Thank you for the informative post .

I looked at this video 4 years ago and have been driving a 2005 Nismo 6sp for 3 years now since doing my research and enjoy it. It is a bit of a rusty truck but for 3k its done its job. Im looking at a 2015-2019 crew cab to replace my king cab with a better frame. I'd like to stay with a 6sp though i will do auto its been a very reliable truck with no break downs other than the starter slowly dieing on me but was able to replace easily and cheaply.

I finally got my hands on these sick headlights and omfg what a night and day difference, no pun intended 😂. But seriously these are 100% way better looking than the Morimoto Hybrid XB and a fraction of the cost. These lights are worth every penny.

I have 3"spacer on my Pathfinder with no problem

Just installed on my truck! I couldn't get the passenger side factory housing (23 SV) out without moving that big wiring loom out of the way. Driver's side was simple. Wish they were aimed a little more forward, but the beams are wide enough to still work great. I'd also replace the 3mm vertical adjustment screw with a thumb screw for getting things dialed in.

so you prefer 6112's, but you didn't mention why it suits your purposes. What are your purposes? rock crawling? high speed trail riding? mall speed bumps? working at an off road shop i am going to assume you like the more extreme side of off roading. maybe a detail that would help people.