Useless video without the sound

Glad I saw this on here broken mine to day thanks

I have a 2016 Mondeo estate will it be the same method ??

If I got 190V in circuit? Does this thing could do 230V for my coffemachine?

Excellent video, well done 👍

Hi I have the acc malfunction come up everytime. How do i reset that fault or what do i need to do. Ford mondeo 2009 titanium

My Dad needs to replace his spark lead how do you get the fly wheel off to get to it?

Hey thank you for taking the time to go through all this. What foot pegs did you use? And what 290mm shock did you find to use? I'm going to do the same.

Thanks,

This is very good, so the seal will seat the bushing?

We made it!!! Thank you for this very helpful video. For some reason, the model we have had only 1 bush. The bush was so grasped we had to go to a machine shop to ask for help. The person in charge took the beam and tried on the press. It didn’t go! He had to use a torch to weaken the bush and then on the press it came off😁 We installed 2 bushes, a new pin and the MF is back on the track😁 Thanks again!!

What is the use of pulling it apart if you can’t find where to buy the gears from??

Does not tell us where to buy the bevel gears. I’ve searched high and low and cannot find six tooth splined bevel gears anywhere!!!!

Where did you buy the gears from??

My bike didn't have a key for the steering lock. I rode it to a local locksmiths who picked the lock and extracted it in about two minutes. Charged me £6. There was a number on the back of the lock so I was able to order a key and reuse it.

I have a similar engine (C25) to renovate. You said you found a workshop manual online. Do you remember where you found it? I have been looking without success. Thanks.

Would have been helpful to show how exactly you pulled it apart.

мужик, то что ты делаешь великолепно. все доходчиво, ничего лишнего. спасибо за работу.👍

Great Video, Thanks. Could you confirm if the bearings you specified were for the Honda 435 UMK or 425 UMK?

Seem like a good idea. I have simlar 4x4 tower. My issue is heavy stone facing and cement. I probably need to modify a pallet. Only issue i can see if going up middle will interfere with diagonal poles. I'd like mine on the outstide. Should be fine if tower is secured to wall. Ill work something out.

I've got a retractable towbar in my 2013 focus...one day the battery went flat and never worked since...every time I start the car I get 5 beeps and sometimes during driving.....any ideas what might be the problem

So I did this and the rivet snapped off and is stuck. Anything I can do?

My bike has fallen over while the steering was locked and the lock is broken inside. I can turn the key as usual but it stayes unlocked. I bought a replacement lock but I could not figure out how to remove bolt. Thank very much Sir!! Thank you.

Super Danke 👍

Hi, here is how to resolve beeping with forscan: 1. Start programming of BCM (main), then select engineering mode from dropdown list. 2. Search for towbar and change to „with towbar attachment” 3. Search for trailer module and select the correct module (in my case 13 pin) 4. Turn off the ignition, get out and get in the car, start forscan again and create new car profile. It will find the TRM Module now. If not then give it some time with ignition off 5. Start TRM (as build) programming and modify the last line 791-03-01 to x19x. In my case I modified from 009C to 019C - it was automatically changed to 019D. After this I was able to use the button and towbar was retracting. Thank you very much for this video. It helped me a lot with fitting towbar to Ford Escape 2018 and definitely saved some money. Thankfully CAN cables were the same color (which is not always the case with US), additionally I had to drill a hole for the wiring loom in the trunk. It is catching the bumper a little when opening but I guess I would have to release the bolts and move the towbar back or front a little.

Very nice job. 👍👍

Hello @tinkerbod, I recently installed the same kit as you have, except that my car had a wiring harness ready in the trunk. I have a problem like yours, 24 minutes into the video, 2 beeps and no response. I have the cable and forscan, can you walk me through the process of activating the hook? I don't know where to find these options, the only thing I found and changed was the presence of a hook and the 13-pin harness.

Hello. Tell me, what kind of lubricant is used when assembling a gasoline crane on rubber bands?

Spot on for what I had to do to a old Honda, only thing is the rivit is bigger on the Honda and the one they gave was tiny.

I 'm looking one, the same. Briggs & Stratton V-Twin 18HP Vanguard, Petrol Engine. Quote me, please. Thanks.

You are using wrong thing at wrong place. This device is for resistive load not for inductive load

Fiber glass dust.

Dragging it on too long.

I have watched loads of these set ups and even though this is 4 years old it is one of the best i have seen,

To get that axle out from the riser you push the roll pin into the axle then hit the axle out. You’ll be able to hit the roll pin out after you remove the axle.

Do you know it the trailer module is the same for a fixed towbar?

Been looking a tail light number plate bracket 2 years now can't find one anywhere part number is 84701124600B . Where did you find onr

Hi pal would you be interested in fitting another one of these mate

Hi, I've replaced my abs sensors but still no luck with the speedometer (RPM, fuel gage and temperature gauge all work), I bought the car from someone who said that it was working and all he did was remove the abs sensors to do some work on the front of the car and all I had to do was plug them back in so I ended up buying new ones as I didn't have the ones he took out and still no luck, my car is a 2008 ford mondeo 2.0 diesel with the converse+ clocks like yours

so you can withdraw the barrel if you have the key, is that correct? my bike has fallen over while the steering was locked and has jammed it in the locked position, I managed to unjam it but I don't trust the mechanism anymore and want to replace it.

Now it's a brand new bike

Excellent

thanks man!! totally useful video for my Kawasaki KLX300R 99

Assume you don’t reinstall the original crash bar. Wish you had also included a bit about bolting the bar to the body. Any tips there?

Nice video mate, out of interest is it still in working order?

Also can you share the info on the spokes for the rear wheel? I need one also.

Great video mate! I'm fixing up a clapped out PW80 myself. Could you please share where you got the little rubber straps that hold the side cover plastics from flapping around?

I'd buy that

Thank you so much! Have you a webside to buy the pieces please ? Gwen from France ! 🙂